HT1688 I installed ios7 and now when I text it stops and takes 30 seconds to reach the next letter can anybody help me ?

I installed ios7 and now I have slow texting I need help please?

Its new software, let the **** thing configure on the device

Similar Messages

My Iphone got wet and now when I turn it on it will not go past the apple logo. Please help.

Hi,
My Iphone got wet and now when I turn it on it will not go past the apple logo. Please help.

Take it in for service or most likely out of warranty replacement. Water damage voids your warranty so you will need to pay towards the replacement.
Cheers
Pete

HT201272 I updated jelly sms and now when I went to use it it says not available in Ireland. Can you help me please with my query? Thanks

HI
No idea whats happened to jelly sms, I updated it, went to use it, I uninstalled it and theninstalled again and now it says it's not available in Ireland. I did pay for the app, several ywars back, does anyone know anything? thanks

I just updated myself to the latest Jelly SMS a few days ago and it stopped working
I tried uninstalling / reinstalling like yourself, but the App store says it's not available in Ireland anymore. Lucky, I have the old version (4.0.5) synced on my laptop so I restored it. The old version works fine, but I lost all my texts.
As far as I've been able to find out, the developer (Finbar) is having trouble with Vodafone Ireland who recently introduced a CAPTCHA to their online SMS service, preventing Jelly SMS from working. He said he'd have a new version in the app store (Aug 28th); it appeared briefly but it didn't work so it was withdrawn in Ireland. A new version is on the way.
I've seen similar happen before, a serious bug is discovered shortly after an update and the app gets withdrawn for a time, then a fix appears later on. Fixes can take a little longer to appear in the app store (compared to Android) as Apple review submitted apps before they're released.
http://www.jellysms.com/blog/

I downloaded a book but now it won't open. Also I am unable to close ibooks. Can anybody help?

I downloaded a book and now it won't open. Also I am unable to close ibooks. Can anybody help?

Hi marthaciffone,
Thanks for using Apple Support Communities. I would recommend first forcing iBooks to quit to see if that helps:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
If the issue continues, most of the remaining troubleshooting steps in this article are applicable and might help:
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Cheers,
- Ari

I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen. Same thing in itunes, itunes u, app store, and a few other apps won't connect. Safari seems to be working fine.

I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen. Same thing in itunes, itunes u, app store, and a few other apps won't connect. Safari seems to be working fine.

I had this same problem. Tried everything the internet said including a full restore. Which was terrible. Nothing worked until.....go to general...reset....reset all settings.
You had to go back in and reset anything you customized afterwards, however it does not allow the store to load. Thanks!

I updated my iMac to lion and now when i leave my desktop and it goes into stand by it like a picture is taken of the screen and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopar

i upgraded my iMac to lion and now when i leave my desktop and it goes into stand by mode, its like a picture is taken of the actice desktop and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopard. does anyone else experience this and is there a fix?

I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard. It was totally updated with the latest from Apple when I bought and tried installing Lion. The upgrade failed, shot my OS and I couldn't boot. Had the constant spinner on a grey screen.. did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck. Crashed my system one too many times. I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac. I have the stuff running on my Mac Pro but have yet to notice anything impressive. I've always used F3 and really didn't require Mission Control. Just open you app folder for launch pad... duh? I use the hot corners anyhow. As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow. I don't like the new Mail either..
As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Please Help!! I deleted the folder System en Macintosh HD and now when i on my mac it says Disk Error Press Any Key To Restart Please HELP !!

I deleted the folder System en Macintosh HD and now when i on my mac it says Disk Error Press Any Key To Restart Please HELP !!

Reinstall Mac OS X.
(59450)

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

Post in Microsoft's Powerpoint (Mac) message boards.

I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music

I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music

Use Spotlight Search (the magnifying glass on the top right-hand corner of your menu bar) to locate your music files. Then point iTunes to those files.

Downloaded Firefox update for my Mac and now when I open it, there is a white box at the top of the page with a grey bar in it that I can't get rid of

I updated my firefox browser for my Mac and now, when I open it, an empty white box appears at the top of the page with only a gray bar in it. It over lays the Firefox home page and I can't get rid of it, so I can't click on anything on the Firefox page. I tried deleting Firefox and redownloading it, but that didn't help. I have to force quite Firefox to get out of it. Help!

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

I downloaded Mavericks and now when I google a topic and select I then cannot scroll back to the original google page?

I downloaded Mavericks and now when I google a topic and select one, I then cannot scroll back to the original google page if I wish to try a different answer?

Sorry, I'm not very good at describing the problem. If I had multiple browser pages open, prior to downloading Maverick I could swipe the mouse to go back or forward as required. Now if I google a subject and the page comes up with all the choices and I pick one, I now cannot swipe back to the first page , I have to re-open google each time, type in my seach and start from scratch.

Does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
If this does not work, you should get it serviced:
Apple - Support - Service Answer Center
How to back up your data and set up as a new device

I updated to mountain lion, i have a macbook air and now when i shut it down, it takes incredibly longer than before to get off! why??

i updated to mountain lion, i have a macbook air and now when i shut it down, it takes incredibly longer than before to get off! why??

The honeymoon is over?

Updated to iOS7 on my iPad mini and now anything i type there is a 30 second lag on the letter appearing? Bug already? or does it need a full reset?

Updated to iOS7 on my iPad mini and now anything i type there is a 30 second lag on the letter appearing? Bug already? or does it need a full reset?

I have read that if you go to Settings, iCloud, and turn off documents and data that this will help with typing.

HT1688 I installed ios7 and now when I text it stops and takes 30 seconds to reach the next letter can anybody help me ?

Similar Messages

Maybe you are looking for