HT1688 I need a Front LCD Display Screen Touch Digitizer Assembly Frame for Iphone 4S Black, where can i buy it ? can i it by website? what ? thanks

I need a Front LCD Display Screen Touch Digitizer Assembly Frame for Iphone 4S Black, where can i buy it ? can i it by website? what ? thanks

Anywhere you can find it via the obvious Google search. It won't be from Apple, but will be a generic replacement.
Why are you throwing away any future chances of out of warranty replacements when you drop or drown it?  Apple will give you a warranteed replacement phone for $199 (in the US, roughly the same in your country)

Similar Messages

  • Can the front LCD Display Panel be use to send custom messages?

    Hi all
    Can the front LCD Display Panel on Rack mount servers like the P1-1000 or the MS-9218 be used to send custom messages?
    Thanks
    Carlos

    You better ask MSI that directly, as I doubt anybody in here can answer that question.

  • Hello,Where in Singapore can I get a LCD display and touch screen digitizer for a iphone 2g.

    Hi there,Where in Singapore can I get a LCD display and touch screen digitizer for a iphone 2g.

    Try searching google.

  • Replacement of broken lcd display screen

    Hi
    I dropped my iphone 4 and the lcd display screen is broken.
    While i am still able to use the phone, not sure if we can have this replaced.
    I purchased the phone while in Sydney, Australia but have now relocated to Chennai, India.
    Would be grateful if someone can advise whether it can be replaced, whether apple store have this facility or whether we get the original screen outside
    Regards
    Sri

    Spoiler (Highlight to read)
    Maybe have your screen replaced by Lenovo Support. Replacing a tablet LCD can be tricky maybe. 
    Jonas
    Microsoft MVP: Windows Consumer Expert
    Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
    Twitter: @jonashendrickx

  • I need a new startup disk for my iBook G4, where can I get one?

    I need a new startup disk for my iBook G4, where can I get one?

    Hi, you might call Apple with it's serial# handy & see if they have original replacement discs, other than that...
    http://www.ebay.com/sch/i.html?_kw=ibook+g4+software
    iBook G4 OS X Tiger/ OS 9.2 Install...
    Disk 1 2Z691-5532-A
    DisK 2 2Z691-5533-A
    (Mid 2005), (Late 2006) Model (A11133 Early 2006), Machine ID PowerBook6,7
    Compatibility 
A1133 (12.1 inch), A1134 (14.1 inch), M9846LL/A (12.1 inch), M9848LL/A (14.1 inch)
    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
        * A PowerPC G3, G4, or G5 processor
        * Built-in FireWire
        * At least 256 MB of RAM (I recommend 1GB minimum)
        * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
        * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools  (I recommend 20GB minimum)
    http://support.apple.com/kb/HT1514
    Apple may even have an International version...
    https://discussions.apple.com/thread/5231053?tstart=0
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710

  • Ical program has disappeared from my computer.  The cache still has my info but there is no program to display it.  Can still see it on my touch.  How do I recover it or where can i re download?

    ical program has disappeared from my computer. The cache still has my info but there is no program to display it.  Can still see it on my touch.  How do I recover it or where can i re download?

    Mark,
    To reinstall iCal:
    1. Insert the Snow Leopard Installation disk into the computer.
    2. The disk will appear on the desktop.
    3. Double click on the "Optional Installs" folder.
    4. Double click on the "Optional Installs.mpkg."
    5. Click on (Continue) in Introduction.
    6. Click on (Continue) in Software License Agreement.
    7. Click on (Agree) to agree to the terms of the software license agreement.
    8. Click on the disclosure arrow ▶ next to Applications.
    9. Select (✓) iCal.
    10. Click (Continue).
    11. After iCal has been reinstalled, download and install the Mac OS X 10.6.8 Update Combo v1.1 to bring iCal up to the most recent version.

  • HT1446 I need to order a replacement battery for Model A1185.  Where can I get it?

    I need to order a replacement battery for Model A1185. Where can I get one?

    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
    I've bought used MacBooks off of eBay for my family, nine of them so far over the last 6 years. I've bought 8 batteries off of eBay sellers, just going with the cheapest. Only had one with a problem, it gave out after 6 cycles. That one was replaced under the warranty by the seller. The only other batteries that have been a problem were Apple branded batteries that started bulging. I've had two of those happen.

  • I'm a software tester for an in-house app at my company. version 10.0.2 is not cmopatible with some controls within our software. I need the v9.0.1 download which I know works with the controls. Where can I get it?

    I'm a software tester for an in-house app at my company. version 10.0.2 is not cmopatible with some controls within our software. I need the v9.0.1 download which I know works with the controls. Where can I get it?

    Well, if you need old versions of firefox you can find them on this site:
    - http://www.oldapps.com/firefox.php
    Best regards, G-Cloud.

  • Need help with new display screen

    I'm using premier pro and want to get a large display screen, I've heard a lot about the new Apple 24" LCD and the Dell 24" UltraSharp 2408WFP...anything else out there thats as good?? Pros? Cons?
    Thanks!
    Nick

    I found this happened to my phone too after the ios7 updates. Solved by  turning off auto-brightness. Since then all has been fine, just have to  manually brighten/dim screen when I need to

  • External LCD Display & Screen Spanning

    Hi All
    I need to connect an external LCD display to my iMac G5 1st Gen computer.
    Is this the right cable -
    http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=6C04E099&nplm=M 8639
    Also I have been reading in this forum about a screen spanning hack to the firmware. Sounds painful but what are practical steps to set this up?
    Many thanks in advance
    David

    G'day mate
    Thanks for the reply from Oz.
    Just had another good look at the back of the external LCD and it has got both VGA and DVI ports on it. Which will get the best results do you think?
    Also here is a dump re the graphics card in my iMac -
    GeForce FX 5200:
    Chipset Model: GeForce FX 5200
    Type: Display
    Bus: AGP
    Slot: AGP
    VRAM (Total): 64 MB
    Vendor: nVIDIA (0x10de)
    Device ID: 0x0329
    Revision ID: 0x00b1
    ROM Revision: 2103
    Displays:
    iMac:
    Display Type: LCD
    Resolution: 1440 x 900
    Depth: 32-bit Color
    Built-In: Yes
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Display:
    Status: No display connected
    As you can see, the card is a GeForce FX 5200. The web site refers to iMac G5's with GeForce FX 5200 Ultra cards and not the GeForce FX 5200. (My iMac is a Rev A machine).
    Do you think this will cause issues? I need to run the iMac and the LCD at a show for my company and I am a bit concerned that I might end up with a Mac with no working display. Is that likely?
    Cheers
    David

  • Why are my display screen colors going blurry?  Is the monitor going?  Can it be fixed?

    The display screen of my Imac osx 10.4.4 had a vertical colored line through it for several weeks.  Now all the colors have become blurry.  I ran the hardware test and there are no issues.  Can the display be fixed or is the computer dieing?

    I had a similar issue with an iSight G5 about a year ago. The colors began to go funky on the screen and I ran every test I could think of. The situation gradually worsened and I finally put the iMac to rest in a back room in my basement. The hard drive still works and the information is accessible on it and I have retrieved just about everything I can think of from it. The computer didn't die, but the monitor did. An iMac without a working monitor is kind of useless.
    I'm guessing your iMac is fairly old - by today's standards anyway - and even if the monitor issue can be resolved, it may not be worth the cost. You would have to find that out on your own at an Apple Store or a Mac repair shop.
    Maybe it can be repaired .... and this is just my opinion .... but I would find a nice recycling place to lay the Mac to rest and buy a new one.

  • Need a good lcd display

    Hi there:
    I am in high school. I have had an emac for three years, a 1 ghz, and have found that it takes up too much space, doesnt have usb 2.0, and is getting slow. I would like to replace it with a refurb mac mini 1.42 ghz. Will I notice that large of a speed boost?
    My main question is what display to get. I will get it used, but want a good display. (Aka quality of an apple cinema) I would like to keep it under three hundred, or two hundred at best. Any one have a very good display that they could recomend?
    Thanks for any help.

    I'd like to put a vote in for Samsung LCD's too. Personally I think Samsung makes some of the industry's best LCD panels. I have yet to see a Samung LCD with a dead pixel and they feature some of the best evenly-lit backlights. (no dark or bright spots like in the corners on cheaper LCD's)
    I use a Samsung SyncMaster 173p+ (17" LCD w/DVI) on my MacMini and it works great. However, the 173p+ uses all software controls which is Windows-only (no Mac version of their software controls) so I cannot make any changes to the image (such as brightness and contrast) but I think the factory settings are fantastic straight out of the box. (An important note is that the 173p+ is currently Samsung's top-of-the-line 17" LCD) Also the aluminum bezel on the 173p+ matches the Mini's aluminum casing almost perfectly so they look great together. Oh, although no access to controls, the Mini can still turn off and turn on the display in sleep and energy saving modes.
    Before the Samsung display I had a 2-year old ViewSonic 19" CRT connected using the Mini's included VGA-adapter which exhibited the "shakey/blurry" video problem so I that's when I got the Samsung display and have had absolutely no problems with it since.
    -Dan

  • HT1338 Since having my Macbook Pro attached to a large display screen, everything is too large for the screen. Is there a cure please?

    Today I had my Mac linked to a projector screen, and since disconnection evrything from the desk top onwards has been too large for the screen. Before that evrything was perfect. I have tried zoom buttons etc, but nothing seems to work. Any help gratefully rceived.

    So it's not the Zoom feature?  Open System Preferences Universal Access pane Seeing tab.  Make sure Zoom is turned OFF.
    If it's not that, then you may have the resolution set so that it is not optimal for the built-in display.  Open System Preferences Displays pane Display tab.  The optimal resolution is usually the one at the top of the list of choices.

  • Need new search criteria on Screen 102 of transaction va02 for payment card

    Hi Friends,
    I have a requirement in which i need to add a new search criteria of payment cards
    on the VA02 initial screen, can any one suggest me a approach for this.
    Please suggest me the elaborated steps.
    Thanks in advance.
    Regards
    Digvijay

    Go to SE11 > select radio button 'Search Help', create a custom search help and activate it.
    Next, goto SE11 > Search help = ASH_VMVA and hit change
    Ignore warning.
    click on tab 'Included Search Help' and add the custom search help that you just created in step 1.
    Next click on 'parameter assignment' push button and maintain parameters (parameter should automatically default, just accept and save)
    Activate ASH_VMVA.

  • My LCD Display is showing a blue hue for a short time after plugging in.

    I'm finding with the display that when I plug in my laptop, after a few seconds a blue hue comes over the screen. I've tried switching to the better performance graphics card on the MacBook Pro and get the same problem. The first few seconds the color is correct.
    Can anyone help?
    Message was edited by: Host (to clarify subject)

    Thanks, this is what I did:
    1. In system preferences go to 'Displays'
    2. Go to the color tab and click on 'Calibrate...'
    3. Check the tick box for 'expert mode'
    4. Continue through to Target White Point
    5. Change from 6507k to 6024k.

Maybe you are looking for

  • Dunning report driver program

    Hi,    I see a dunning sap script z_asia_dunning assigned in Dunning procedure.  I am interested in knowing the driver program for this dunning script.    I searched in SDN and failed to get this information.  Please let me know how to get a driver p

  • Two iPhones to the same computer different accounts?

    We got a new Windows 7 computer and need to know how to sync both our iPhones to this computer. I used to sync my iPhone to our old computer and my wife synced to her laptop. I have been trying everything I have read on how to do this on the net for

  • Problem with serial number with crossgrade

    We are upgrading FCP 4.5 with crossgrade, but the old serial is not working. My understanding is that if you are upgrading from FCP 4.5, then you also need a new serial number. That we didn't get. Am I correct or did someone crossgrade from FCP 4.5 w

  • Abap doubt

    hi this is satish,     how to change the date formate in the alv report.Actually the values are coming from the table.In the table the date format be yyyymmdd.but How to change the date formate in alv like ddmmyyyyy.Any one can send the code to chang

  • Read Self Register Request using 11g API

    Gurus, I am trying to read Self Register Request using API but I am getting beneficiaries and requester data as null. Can you please provide some code snippet to read beneficiary data from a Self Register Request.