HT1688 my contact list is missing a lot of contacts, why?

All in a sudden my contact list is missing many names and pictures of the contacts too.

go to the contacts app and select groups at the top left corner. and select all of them and see if your contacts appear.

Similar Messages

My mail will not stay in order no matter what I do Miss a lot and some totally disappear?

I try clicking show by date works for a while then stops I look at mail then go to print later and many times it disappeared Search everywhere gone
I am missing a lot of important emails
Also can not save my contacts to my list Keeps saying I only have 2 )the most recent)

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
Have you created a new account or updated your existing account ? All content that you download from the store is tied to the account that downloaded it, so if you have created a new account then all of your existing downloads will remain tied to your old account.
If you've updated your existing account then try tapping on the id at the bottom of the Featured tab in the App Store app and log out of it and then log back in with the updated id so as to 'refresh' the account on it.

Workflow task list is missing or damaged. SharePoint 2010

SharePOint 2010 Enterprise
Customer created workflows for the annual review of our QPC Emergency Plan.
The document library shows that there is a EP_Review workflow “In Progress” for each section.   However if you click into the “In Progress” link to see the actual progress of the workflow it shows no Visio diagram, it’s just a blank white
space (not even an error message) and under the Tasks section it gives the message:
"The workflow task list is missing or damaged. Please contact your administrator for more information"
I looked in the Task List and there are no tasks showing, which normally does show when we kick off a workflow.
I ran a report on the EP_Review workflow for Cancellations and Error messages and the system comes back with the following error message: "Report contains no Data"
Log says:
3/05/2014 11:58:08.67 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
nasq Medium Entering monitored scope (Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c))
03/05/2014 11:58:08.67 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Logging Correlation Data
xmnv Medium Name=Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.67 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Logging Correlation Data
xmnv Medium Site=/sites/Compliance eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.70 w3wp.exe (SLSPW02:0x8DC0)               0x8418 Document Management Server    Document Management
52od Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c].
Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list. eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.75 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=32.1239873194787 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.78 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Server             OpenXml
0000 Medium OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\TEMP\AppData\Local\Temp\tmpBAE2.tmp, fcm=3) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.80 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
b4ly High Leaving Monitored Scope (EnsureListItemsData#2). Execution Time=10.6167606926937 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.80 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Runtime
tkau Unexpected Microsoft.Office.RecordsManagement.Reporting.ReportEmptyException: Report contains no data.    at Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs
e)     at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler
sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.80 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
b4ly Medium Leaving Monitored Scope (Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c)).
Execution Time=131.764628890724 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:09.05 w3wp.exe (SLSPA02:0x1CD4)               0x1F68 SharePoint Foundation         Topology
e5mb Medium WcfReceiveRequest: LocalAddress: 'http://slspa02.corp.questar.com:32843/5d041280466646db9f816a170ae8f6b8/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:8f54c63f-a3d4-4180-b9be-2eefe9ff3495' 01f77dd7-96fb-4f20-b72a-cd736a3354bf
03/05/2014 11:58:09.05 w3wp.exe (SLSPA02:0x1CD4)               0x1F68 SharePoint Foundation         Monitoring
nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 01f77dd7-96fb-4f20-b72a-cd736a3354bf
03/05/2014 11:58:09.05 w3wp.exe (SLSPA02:0x1CD4)
Any Ideas how I can figure out how to resolve this?
Thanks for any input

Hi mikeatquestar,
it seems you may need to check if should the task able to create at your environement,
you may try this at your development environment first:
Saved a task list as a template from a working site collection and moved the template to the problem site collection. Used this template to create a new list, and associated this list to the Workflows task list.
http://office.microsoft.com/en-us/windows-sharepoint-services-help/manage-list-templates-HA010099156.aspx#BMcreate
http://office.microsoft.com/en-us/sharepoint-server-help/copy-or-move-a-list-by-using-a-list-template-HA101782479.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Only the number, not the name, is shown in the list of missing calls

When number X calls me I get the contact's name like this:
If I don't answer the call and go to the list of Missed calls, I will only find the number (not linked to the contact). Not the name of the contact.
This happens to contact with many numbers added. Could this be the reason?

Hi,
I am just giving the solution what I have done in my project. Hope this will help:
     DATA: BEGIN OF it_ccode OCCURS 0,
               bukrs TYPE t001-bukrs,
               butxt TYPE t001-butxt,
                 END OF it_ccode.
DATA: wa_ccode like line of it_ccode.
Select Company Code (bukrs) and Text (butxt) from table T001.
SELECT bukrs butxt
from t001
into table it_ccode.
LOOP AT it_t001.
    ADD 1 TO lv_index.
    ls_additional_data-fieldindex = lv_index.
    ls_additional_data-fieldname = 'FIELDNAME_KEY'.
    ls_additional_data-fieldvalue = it_t001-bukrs.
    APPEND ls_additional_data TO additional_data.
    ls_additional_data-fieldname = 'FIELDNAME_LABEL'.
    CONCATENATE it_t001-bukrs '-' it_t001-butxt
    INTO ls_additional_data-fieldvalue.
    APPEND ls_additional_data TO additional_data.
ENDLOOP.
And the form my fields binding is:
$record.FIELDNAME.DATA[*].FIELD
Try this out. Hope this will help.
Regards,
Amit

I am trying to reset my security questions but the email listed is missing a letter.

Anyone know how to reset security questions if the email listed is missing the a in "yahoo"? My ID is correct but not the email address associated with security questions and I don't see any way to change the email.

Click here for information. If you can't reset them through the method described in that article, contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to change the rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(96538)

Face time calls not "announced," but listed as missed calls

iPhone 4 (iOS 7.1) -- Found 4 Face time calls listed as missed, but I never received any audible alert that a call was attempted When I discovered the missed calls, had my husband call me on Face Time and it rang through properly. The 4 missed calls were all from my daughter, who is listed in my contacts; all came in one after the other (not at different times).

Have you checked that the Do Not Disturb mode is off?

Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

When you said you have no fax machines on your line, that does include computers directly connected to the phone line?
The reason that I ask is a computer with a dial-up modem (a non broadband modem) that can connect to your phone line, can have software that makes the computer act as a fax machine.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library - but two are missing from the folder.

When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!

Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L

HT203167 im missing a lot of music where did it go? and how can i get it back

im missing a lot of music where did it go and how do i bring it back on my library

No way for anyone here to know where it went, as you have provided no info about your issue.
Use your backup copy of your computer to put everything back.

Where are my "Favorites"? I just downloaded Firefox and now my Favorites List is missing!

I loaded Mozilla Firefox. Now, when I go to my YAHOO E-mail page, all my "Favorites List" is missing. How may I retrieve them? Where did they go?

See:
* https://support.mozilla.com/kb/how-do-i-use-bookmarks

Assignment of task list after the inspection lot status is released

Hi,
I have applied a user status with which i am able to release the inspection lot.After that i am going to assign a task list. But it is not getting assigned.
please help me.
Regards
Vivek Deshpande

Hi,
Key date is same. I have checked for it.
What i am saying is , i have manually updated inspection lot status to release state by applying user status. And after that i am trying to assign inspection task list to the inspection lot.But i am unable to do so.
Can i do this ? Please help
Vivek Deshpande

Review Approved Vendor Listing is Missing in Sources of Supply/Service Agen

Hi SRM Gurus
We are using SRM 5.0 Classic scenario, SAP Support Pack Upgrade is going on our testing client.
We have two issues.
Issue: 1
In this Support back Upgrade reason, the "Review Approved Vendor Listing is Missing" in Sources of Supply/Service Agent tab while creating the SC's.
Issue:2
I am unable to select any other plant in the same Company Code in the Basic data tab while creating the SC's
Please advise.
your answers will be rewarded
Thanks & Regards
Sada

Hi Gurus
User XYZ is unable to select any of the plants in the same company code in our testing client , after the SAP Software upgrade.
For testing purpose, I tried to shop for user with the default company code as 1000 and plant 1000, after this I am trying to change the plant as 1001, but its still in plant 1000, but I am able to change the plant 1000 to 1001 while I shop for me.
For this happening only for few users.
Also I am able to shop for different plants in our production for same user without any issues.
I verified the user attributes, every things looks good.Please throw some lights on this issue.
Thanks & Regards
Sada

List of missing images?

RoboHelp HTML 2002.
Is there any way to generate an automated list of missing
images from a project? I'm interested even if a third-party
application is required.
The only way I'm aware of is to open each image folder
individually and scroll down thru the thousand images to look for a
little red X on an image. Inefficient and error-prone for sure.
Is there any better way in this version of RH HTML that I'm
missing?
Thanks.
JoeC

Hey Joe -
I like
Xenu. It
creates a list of all broken and working links, and the price is
right (free).
I also like their stand on Scientology:
http://home.snafu.de/tilman/index.html#cos

I miss a lot of tools, how can I get them?

I miss a lot of tools, how can I get them?
I do have an activation code etc.
Most of the tools have this little arrow thingy below which has to lead you to more options, but I don't have any of these options. Someone here who knows what I can do?
I already re-installed.

Which application does this concern? Have you tried posting in the product forum for this?
Here is a link to a page that has links to all Adobe forums...
Forum links page:
https://forums.adobe.com/welcome

Keyword list is missing

My whole keyword list is missing in Lightroom 2. The keyword sets are there. I am using Win Vista. Has anyone else had this problem?

The keyword list is there and it shows over 4000 photos in Places but not any of the many sub-terms in Places. It only shows church which I put in this morning. If I click on a photo, it shows 3 different keywords for that photo under Keyword Tags but only the category Places in the Keyword List (I had many other categories). I am pretty sure the whole list was there yesterday.

HT1688 my contact list is missing a lot of contacts, why?

Similar Messages

Maybe you are looking for