HT1688 My phone is turning on but will not load past the apple screen

help with my iphone 4 ive tried everything i know

Reset, hold both the home and power buttons until the iPhone restarts again, usually takes about 10 seconds of holding both buttons. If still problem, you may need to Restore the Firmware of your iPhone. If you decide to do this, try DFU Mode Restore. Steps for DFU Mode are, open iTunes on computer, connect iPhone to computer with USB Cable. Hold both Home and Power Buttons for exactly 10 seconds, release the Power button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds of holding Home button. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. If Restoring iPhone Firmware fails, and you have Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution.

Similar Messages

  • My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

  • Satellite L500 will not load past the 'welcome' screen

    Hi,
    My Toshiba Satellite L500 laptop will not load past the 'welcome' screen. The cursor thing just keeps going around and around but won't go to my desktop.
    Last night it went into some temporary profile and it had a message saying 'your other profile cannot load at this time please try again later'
    Any help would be greatly appreciated.
    Thanks,
    Kara

    The error message is not known to me and also searching in google didnt get any hints.
    Possibly your Windows OS is muddled up.
    Did you try to boot Win 7 in safe mode?
    Try this. Restart your notebook, tap the F8 key.
    In advanced boot options choose the option called Safe Mode.
    If the notebook does not allow booting in Safe Mode, try the option Last Good Known Configuration.
    If this didnt help, try Repair my Computer. Here you can choose between different settings.
    The one which could solve this is HDD recovery which helps you to set the notebook to factory settings. But this means also that your HDD would be formatted!
    So be aware of this!

  • My MacBook pro will not load past the grey screen with the spinning wheel. What do I do?

    My MacBook will not load past the grey screen with the spinning wheel of death. Anyone have any solutions?

    Invoke Safe Mode by holding down the shift Key as you restart. This will do a Disk Utility "Repair Disk" as it starts up (so it takes a few minutes longer) and then load with minimal extensions loaded, and request your login username and password, even if you normally do not use them to log in.
    Safe Mode runs the screen using simple, unaccelerated commands. Most things are available in Safe Mode, but things that rely on extensions will not be.
    Acomputer that works in Safe Mode, but fails again after you restart, often implicates your extensions and add-ons.

  • My Macbook Pro will not load past grey Apple screen...

    Last night my Macbook Pro froze so I closed it and went to bed. Today when I opened it, it was still frozen, so I held down the power button and rebooted it. It got as far as the grey Apple screen with the spinning wheel and will not load any further than that. I've rebooted a couple times since and it continues to do the same thing, stays on the grey screen forever.
    I searched this problem on the Apple Support Communitites and none of suggestions (holding Shift after the startup tone, holding Command+R) have worked so far. Is there any way to fix this problem without losing my data or having to pay to talk to Apple Support? PLEASE HELP! :(

    Zzoozu wrote:
    None of that made sense to me or helped me. Anyone else? Maybe someone who has answers dor someone not a computer genius?
    Then we can't help you as we need you to be able to help yourself and the instructions are complicated and long to paste here over and over again for the same proceedure.
    Hire the services of a local Mac computer repair before you delete your data by accident.
    You can jump down and do #8, that might clear the issue right away, but some programs are not going to work and require updating or reinstalling again.
    ..Step by Step to fix your Mac

  • 3g (3.1) Will not boot past the apple screen

    I have been having the random shut off issue intermittently for a while now. I woke up Wed morning and my phone worked fine. I checked it 20 minutes later and the screen was black. Completely unresponsive.
    I plugged the phone into the wall and thought all was fine as I saw the apple appear when I pressed the sleep/wake button, but the phone shuts off. The phone will continuously show the apple on bootup and then shut off when I press the sleep/wake button. I booted the phone and managed to get the "connect to itunes" to display, but the second I disconnect from the power source again the phone shuts off.
    The phone is completely unresponsive when plugged in via usb. I have tried multiple computer and different cables.
    I have tried, resetting, hard resetting, DFU mode and nothing works. My phone is out of warranty and I am running out of options outside of having the unit replaced.
    Can anybody shed some light on this issue? It would be much appreciated.

    Hi,
    Try leaving the iPhone directly connected to a high-speed USB2 port the computer, using the cable that came with it, for 5 minutes. Then try to restore the iPhone from recovery mode as described here: http://support.apple.com/kb/HT1808
    If that doesn't resolve the issue, the iphone will need service. This webpage: apple.com/support/iphone/service/faq/ provides answers to Frequently Asked Questions about iPhone service.
    -Jason

  • My operating system has just vanished !! The laptop turns on but dose not go past the apple logo and I really need my files from my hard drive ASAP ??

    My laptop had lost it's operating system,it turns on and the logo comes up with the spinning wheel And that's as far as it goes, I can not get into safety mode. I can not open my bios and I desperately need by collage files from the hard drive. Please help!!

    Try booting in Safe Mode.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

    can somebody please help me fix this issue, i have been sitting at my computer all last night and this morning trying to figure it out. It could be the hardrive or anything really i just need to get it working. Alot of important things that need to be done using this computer and i am freaking out.
    My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolv

    MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolve this problem?

    Try booting in Safe Mode by holding your Shift key down when booting. Also, try holding the eject key down when booting to eject the DVD. If you plug a mouse in and hold the clicker down when booting, that should eject the DVD.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • HT201263 I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

    I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

    Place the phone in recovery or DFU mode (search Google) and restore.

  • I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

    I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
    I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
    The only things I did last night:
    -cleaned the history of Firefox out, including cookies
    -let it unplugged all night
    -plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
    -shutdown the computer since I was going out and thought it would help the computer charge
    -came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
    -tried turning it off and on to no avail

    Before doing a reinstall, which may not be needed at this point,
    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
    Then Repair Permissions.
    No need to report any Permissions errors........we all get them.
       DALE

  • HT1212 I have no idea why suddenly my iPhone5 will not move past the Password screen; also, a voice describes each button I touch, and ends with "screen locked" (not "phone locked").

    I have no idea why my iPhone5 suddenly will not move past the PW screen; a "voice" identifies each button touched (the Slide button, for example) or the PW buttons, and then ends with "screen locked" (not phone locked).

    I believe you have Voice Over on:
    You have to tap, then double-tap to select the numbers to enter your passcode.
    Then:
    Press Home.
    Tap Settings. Then double-tap Settings.
    Tap General. Then double-tap General.
    Use three fingers on the screen to scroll to Accessibility.
    Tap Accessibility. Then double-tap Accessibility.
    Tap VoiceOver. Then double-tap VoiceOver.
    Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

  • My MBP will not lot start up. It chimes on but will not load up the OS. Any Ideas on how to reboot, btw i do not have the OS Disc.

    My MBP will not lot start up. It chimes on but will not load up the OS. Any Ideas on how to reboot, btw i do not have the OS Disc.

    The System DVDs that originally came w/your MBP has the troubleshooting tools.  Suggest that you find them.
    Do you have any 3rd party utility DVDs?  If so, they may work.  DW would be your best choice.  Does wonders.
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource:  International Support Phone #s.

  • My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

    My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

    I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.

  • My Iphone got wet and now when I turn it on it will not go past the apple logo.  Please help.

    Hi,
    My Iphone got wet and now when I turn it on it will not go past the apple logo.  Please help.

    Take it in for service or most likely out of warranty replacement. Water damage voids your warranty so you will need to pay towards the replacement.
    Cheers
    Pete

Maybe you are looking for

  • BI Reporting across multiple approval years - IM program position hierarchy

    Hi, We have an issue with our BI report whereby if a user wants to report year to date actuals for financial year 2010, they need to run the IM report twice. This is because the IM report is run with a program hierarchy(based on 0PROG_POS), and the i

  • Another sequence query

    I'm trying to burn a series of pictures to a CD from iPhoto via a burn folder. The pictures are in the sequence I require in the iPhoto album but the sequence changes when I drag them to the burn folder. Is there an easy way to prefix the titles in i

  • Archiving not happening

    Dear All, I am doing the archiving for External storage system(Legacy Server) for Document management server. Can any one guide me like which Archive object I need to select for archiving the same. I tried with Archiving object CV_DVS, but it is not

  • Web Dynpro Component cannot be found in list when Creating Callable Object

    Hi All,     I have created a web dynpro component and implemented the IGPWebDynproCO interface, after that I deployed it into the J2EE engine.     But in the step of choosing the web dynpro component as a callable object, I cannot find the one I crea

  • Any other extension for mailing thru SO_OBJECT_SEND...

    Hi all,       We use ALE system which triggers the mail and it is sent to internal as well as external mailing system. It creates an attachment with extension .scrwith the mail. Due to some virus problem the local firewalls deletes the attachments wi