HT1688 phone will not recognize the network, keeps going from searching to no service

phone will not recognize the network, keeps going from searching to no service. move my sim to another phone and works fine.

sorry the actual version is ios 6.1.4

Similar Messages

  • I have an airport extreem network that works with two MacBooks.  I am trying to get my PC (IBM ThinkPad) to connect to the network.  The PC has airport for the PC downloaded but it will not recognize the network.  Any suggestons please!

    I have an airport extreem network that works with my two MacBooks and a iMAC.  I am having no luck in getting a PC (IBM ThinkPad0 that has the PC airport software to be recognized by the network.  Any suggestions?

    When you introduced the AirPort Extreme, you had a condition where you have two routers in series. The simpliest solution is to reconfigure the downstream router (in this case the Extreme) as a bridge. This will allow the upstream router to provide the required NAT & DHCP services to all network clients regardless of which router they are connected to.
    To reconfigure the Extreme as a bridge, you will use the AirPort Utility. (Note: I will provide the steps for using AirPort Utility v5.x)
    AirPort Utility > Select the AirPort > Manual Setup
    Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode)

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

    Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

    Place the device in DFU mode (google it) and restore as new.

  • HT4623 how do I either: 1) turn off comptability feature, or 2) up grade the .exe to be compatable with the iphone  ios 6.0.1 software.  The computer will not recognize the phone.

    How do I either: 1) turn off comptability feature, or 2) up grade the .exe to be compatable with the iphone  ios 6.0.1 software.  The computer will not recognize the phone.  I reinstalled itunes, but it still does not work.

    What are you talking about? There is no "compatibility feature" on the iPhone, and .exe files won't run on the phone.
    Please slow down and explain exactly what you're trying to do and what happens when you try.

  • My iPhone 5 has my old email address and password in it, I updated both online, but my phone will not recognize and therefore has now locked me out of my photo stream.  how do I change my iCloud email on my phone???

    Please help.
    iCloud on my iPhone still has my old email in it with no option to update it.  I have no access to the old email.   I updated my email and password online via my macbook, but my phone will not recognize either!  It keeps popping up a screen for me to enter my password, but it says it's incorrect.  
    How do I fix this on my phone?????
    I can't fix it online because my iCloud online (although working) does not recognize either of my devices because they need updated….which I'm not able to do due to storage issues.
    I just want my phone to recognize the new email and password!!
    I have no idea what I'm doing but I'm about to throw this phone across the room.
    thanks!

    Welcome to the Apple community.
    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.
    This is answer is provided from my own database of boilerplate responses and the content was last reviewed and tested on: 2014/05/23
    You should still be able to log into an old email account, even if you haven't used it for some time, very few providers delete email accounts.

  • Will not recognize the Lucid LG when connected with USB

    My Dell  will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately.  After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?

        That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port.  Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5 
    Keep us posted on any additional information/details about your issue.
    Thanks,
    MikeS_VZW
    Follow us on Twitter @VZWSupport

  • My iphone 4s will not recognize the attempt to charge?

    My iphone 4s when I first recieved the phone it will just turn off and will not recognize the attempt to reset/restart the phone. Now the phone will not recogize the attempt to charge. I tried different cords, outlets, cord base things, and even the computer. When I plugged my phone into the computer it recognized the charge only when the phone was off. When the phone turned itself back on it no lo0nger recongnized the charge. The computer then popped up with a message that said device malfunctioned pc will not recognized device. What should I do? When I took the phone multiple times to my service provider about the previous problems they said "Oh, thats technology for ya!" Any advice?

    When I plug my phone into the computer tho it wont even reogize that it is there. If I reset my phone will I loose everything? Also which reset do I choose?
    Reset all Settings
    Erase All Content and Settings
    Reset Network Settings

  • HT4623 my phone will not pick up network, i have tried restoring on i-tunes and it comes up with error message -1

    my phone will not pick up network, i have tried restoring on i-tunes and it comes up with error message -1

    Here's what that error means:
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    This comes from this article:
    http://support.apple.com/kb/TS3694#error1

  • I recently bought a new laptop because my old one crashed.  The only backup I had for my music was on my ipod.  My new computer will not recognize the ipods music and I can't transfer anything.  What do I do???

    I recently bought a new laptop because my old one crashed.  The only backup I had for my music was on my ipod.  My new computer will not recognize the ipods music and I can't transfer anything.  It keeps asking me to sync the ipod to this computer, but I'm scared to lose all my music.  I want to transfer some of the music onto my iphone but I can't.  I'm very frustrated and wish I knew more about computers at the moment!?!?  What do I do???

    You will need the help of some sort of 3rd party software to help you copy the content from your Shuffle back to your PC.  Once you have done that, you can reimport this music into iTunes and configure it to sync to your new Shuffle.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

    Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

    So yu tried all of this:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    If you had then time for an appointment at ther Genius Bar of an Apple store.

  • HT4623 my phone will not verify the update

    my phone will not verify the update

    I tried to install it a good 20x before it finally verified. Keep trying. Goodluck!

  • I have changed to AT&T U-verse, which has a new modem and router combined.  Safari 5.1.10 will not recognize the wifi signal, but Foxfire will.  What settings do I need to change on Safari?

    I have changed to AT&T U-verse, which has a new modem and router combined.  Safari 5.1.10 will not recognize the wifi signal, but Foxfire will.  What settings do I need to change on Safari?

    Hello SalsburgD
    The first thing I would check is to make sure that the router is using the recommended settings to get online. Another troubleshooting step is to create a new Network Location and then join your network to see if that changes things. 
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Using network locations (Mac OS X v10.6 and later)
    http://support.apple.com/kb/ht5289
    Regards,
    -Norm G.

  • HT1400 I purchased a new chip but my iPhone 4S will not recognize the new chip so what do I need to do?

    I purchased a new chip but my iPhone 4S will not recognize the new chip so what do I need to do?

    okay from reading posts it seems if I transfer my backed up info from my old comp to the new one and erase my dad's phone's back up i could reset my phone and it would transfer all my old data back onto the phone, be linked to the new computer and i could proceed.  Where do i find the backed up info from my phone?

  • I am trying to hook my macbook pro to a sony bravia TV via DVI to HDMI cable and the TV will not recognize the signal. The same set up has worked with three other, though different televisions. Any thoughts?

    I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?

    Is the TV set to take input from the HDMI connection?
    On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection.  Try clicking Detect Displays just to see if the computer can now sense the presence of the connection.  Check your connections.
    If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image.  Set the proper resolution (probably 720p, 1080i, or 1080p).  Set the refresh rate (probably 60Hz) if that preference is shown.  You should see a picture at this point.  I  recommend turning off mirrored displays if it is enabled.

Maybe you are looking for

  • View cluster table child table calling problem!

    Hi All, I have created a cluster table with one table as header and one as item... Header table : ZRAJ1 ITEM TABLE : ZRAJ2 ZRAJ1 : ZPRODUCT ZPROD_DESC ZSTATUS ZUSER ZRAJ2: ZPRODUCT ZLABEL This clearly shows that zraj2 is depending on ZRAJ1. Created a

  • Windows 2008 R2 Very Slow to Boot from SAN

    I have installed Windows 2008 R2 on a blade in a boot from SAN configuration. I loaded the Cisco Palo FCOE drivers during the install and it went through without a hitch. After the install the reboots are painfully slow, like 15 minutes. After boot u

  • Mail/Entourage Sync keeps crashing

    If I enable the sync function in Entourage preferences it crashes, asks to report to Apple and restarts every 25-35 seconds. The error message is not intelligible, as far as I understand things. Perhaps someone with more knowledge would know what it

  • Narrowing search in iTunes music library

    Hi All...I'm using iTunes 7.0.1 on a MacBook Pro and wondering if there is a way to narrow the search criteria in the music library. For example, searching for a song title "Love," and wanting to see songs with only that word as the title, not songs

  • SOA Suite -  Active/Passive HA

    Dear All, Need your guidance in configuring Oracle SOA suite with ESB to make it highly available (Active / Passive) . Have gone through one document but its only showing Active/Active configuration. Is there any step by step doc for this. Regards,