HT1688 volume button not working on iphone?
my volume button is not working on my phone. How can I fix it?
Button my be faulty or sometimes a short of the charging port can cause this. Clean iPhone charging port with toothbrush and small amount of Isopropyl Alcohol.
Similar Messages
-
HT1688 volume button not working
One of the side button on my iPhone 5 is not working. I was able to raise the volume but cannot decrease it.
Why does this happen? something worng with the phone?if you have warranty take it into an apple store and they can look at it. at a lot of the stores they can actually take it apart and fix it for you
-
Volume button not working on iPhone 4
My iPhone 4 volume button isn't working. Also, I can't seem to hear any music unless I plug in my headset. I've already tried plugging it in several times, rebooting it and have the newest software. Is there anything else I can do besides going to the Apple store? They're not exactly close to where I live.
I had this problem yesterday also
did it get right or not yet? -
Volume button not working on iPhone 5
I have tried to reset my iPhone, I rebooted it, played with the audio settings it still doesn't work.
Any idea anyone?
ThanksAssistive touch is a nice work around. I had the same problem and my phone was still under warranty. I set up and an appointment at a local Apple Store and they swapped it immediately. The whole transaction took about 5 minutes to wait for an Apple Rep and 5 minutes to swap the phone. AppleCare is well worth the cost when you get customer service like this.
-
Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???
Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order. -
HT1688 Power button not working
Power button not working on iPhone 5
This is a defect on iPhone 5 power button that wears out in about 13-14 months of usage just after you go out of warranty. Apple is aware of this issue but chooses not to accept this as a defect. I asked the Genius bar guy and they told me this is a common case recently and costs $269 to replace your phone. There is no repair option. I am very mad and believe Apple needs to take action or will lose their customers. All iPhone 5 owners that I know started having this problem in the month of 13 -14.
I believe if the numbers go high, Apple may start a recall program. Please encourage anyone with this problem to post here. $700 phone should not wear out this soon. Apparently the part is defective on almost all iPhone 5 devices.
Other threads about this:
https://discussions.apple.com/message/23797113#23797113
https://discussions.apple.com/message/23258974#23258974 -
my ipod 4G power button and volume button not working after updated to ios6.
i also experience wifi issue. my ipod can't detect any wifi signal.
so deppresing!
what should i do?
i can't put my ipod to sleep, can't adjust volume, can't shut off.
should i update to ios 6.1?
HELPTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update. -
Iphone 4 volume buttons not working
iphone 4 volume and mute buttons not working, checked all settings they are all fine and when headphones in it works??? When I take out headphones the volum buttons do not work, when phone rings or text receives only vibrates???? HELP!!!!
This could be due to some debris or dirt inside the headphones jack that makes the iPhone think that the headphones are connected even when they are not.
Try to see if you can clean the jack being very careful, with canned air as sold in electronics store. Some people have been successful by introducing and withdrawing the headphones jack several times in a row to displace whatever is in there if it is lodged in.
Avoid introducing anything else like a pointed object. You could damage the jack.
If all of this does not work, I would try first resetting the phone by holding the home button and the power button together for about 15 seconds or until the whilte apple appears, then waiting until the phone resets. If the problem continues after this, take it to an Apple Store to see what they believe should be done. -
Volume button not working to snap photos
Upgraded to iOS 5. The volume button was working at first, however I just noticed that it does not work at all now. Only the original button on the screen works. Not a huge deal, but I liked the feature.
I have power cycled still not resolved.... Any suggestions?1. Doesn't Apple have international warranty?
No. Not for the iPhone or iPad.
2. If there is not direct Apple Stores in the country, how do you repair it?
You don't in India. You could give it to someone who is planning to go the US and they could take it to an Apple Store. You could also ship it (at your expense and risk) to a friend in the US and they could take it to an Apple Store. You cannot ship directly to Apple as they do not accept international shipments.
Someone please let me know how i can fix it or how to contact Apple US to see if something can be done?
There is no other "fix". Contacting Apple is pointless and a waste of time. They will tell you the same thing. If you still want to contact them, click on the "Contact Us" link at the bottom of this page.
Next time, buy the phone in the country you intend to use it in. -
Volume button not working after update ios..
My iphone 4s volume down button not working after i upgrade to ios 6.0...and then i update to ios 6.0.1 its still not working...plz help...what happen...???
Settings > Sounds > Change with Buttons... Make sure this is set to ON.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If none of the above resolves the issue, take the device to Apple for evaluation or possible replacement. -
Hi,
i have recently purchased a nokia lumia 620 and since yesterday suddenly the volume button to increase the volume is not working
what can be done here ?
please let me know in case of any clarifications.
thanking you,
regards
ArpitaIs it the same if you try without the Back cover ? If it works fine without it then put the cover back properly and check again..
Else, you may try a soft reset : Press Power + Volume(down) keys until the phone vibrates (about 8-10 seconds). -
Sleep Button Not Working on iPhone 5
Sleep button not working .. Advice on what Else I should do?
I've already turned it off & turned it on, & rebooted it.
I've had my phone since October and this is the first time it's done thisMorning AskVictoria95,
Thanks for using Apple Support Communities.
Installing the latest version of iOS may resolve the issue.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Sleep/Wake button will not lock or unlock iPhone
To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
If either of the above steps don't work, try turning iPhone off and then on again.
If the iPhone will not power off, reset it.
Try to lock or unlock the phone.
Issue not resolved
http://www.apple.com/support/iphone/contact/
Best of luck,
Mario -
TS3694 volume button not working
I updated to 6.0.1 a couple of weeks ago. Immediately I noticed my phone would not pick up my wifi signal at home. It would start searching for a signal and I would have to continually manually selecting my signal every time I return home. Even after doing this it very very slow on downloading anything. Additionally, about 4 days ago my volume button stopped working. My phone will ring when a call comes through but I cannot hear videos or music and my alarm app cannot be used. I tried backing up, syncing and finally restoring it but nothing seemed to work. Help!:(
I also want to add that I am able to adjust the volume while on a call. And if I am on a call and log onto YouTube during the call then I can hear the YouTube video. Weird. Same with music too, if I am on a call I am able to go to my ipod and turn on the music and hear it but once the call ends the sound goes off. Not that I'm trying to listen to music and watch videos when I talk on the phone but just noticed this phenomenon....:/
-
Lower volume button not working
Lower volume button not working
Take it to the Genius Bar while you are still under warranty and they should be able to fix it. I went, one day after my warranty expired. While they confirmed the problem in my iPhone 5, they said it would be $269 to fix. The tech did helpfully show me how there's a much less convenient softkey workaround using General >Accessibility > AssistiveTouch. Not happy about it.
-
HT201401 volume button not working
volume button not working
Sometimes this can be due to short circuit of the charging dock. Clean iPhone charging port with a clean dry toothbrush.
Maybe you are looking for
-
i tried to synce my ipod with itunes and its keeps popping up a window saying " Songs on the ipod cannot by synced because all of the playlists selected for syncing no longer exist" can anyone help me im going on a raod trip tomorrow, I need songs in
-
All I want to do is sign up for the 29.95 offer. No one ever came online to respond to my chat questions. It seems that every time I have to deal with an Adobe issue, it take several hours and I alwys have the feeling something is still not right. My
-
All my X6250s hang in ESX 3.5 U5 with SCSI "command error recovery failed"
After installing a pair of Virtualized Network Expansion Modules (X4238) in our Blade 6000 chassis, my ESX 3.5 Update 5 hosts will randomly fail with the error "scsi: device might be offline - command error recovery failed: host 5 channel 0 id 0 lun
-
Screen froze up and computer became unresponsive after 10.7.1 update
I updated yesterday to 10.7.1 and after the update the computer screen froze and then had white blocks on the screen in a pattern. Now the screen is black and it will not boot up? Does anyone have any ideas? I have done a PRAM and SMC reset and it s
-
HT5891 how do I get the arragment tab back?
Ok the button is not there I tried replacing my cable and it worked fine wit MT Lion. I sat on the phone with support I did everything they asked. did not do a thing. <Edited by Host>