HT1688 what is the HDR option when using the camera?

What is the HDR option when using the camera and why is it important to me?

The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

Similar Messages

  • I use a 27inch lcd screen. what do i have to do to close the mac book when using the big screen????

    i use a 27inch lcd screen. what do i have to do to close the mac book when using the big screen????

    Here is Apple's instructions:
    http://support.apple.com/kb/ht3131
    Regards,
    Captfred

  • How do I remove an old username from the app store when using the update function

    How do I remove an old username from the app store when using the update function.
    I purchased my Mac used.  The former owners username prepopulates when I try to perform the updated function on the app store.  It does not allow me to use a different user name.    I have created my own username and password.  I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username.  Any help is appreciated.

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Not having the problem, don't personally know anyone who is.

  • Omit the XML declaration when using the PHP MM_XSLTransform class

    Hi
    Is there any way to omit the XML declaration when using the
    PHP MM_XSLTransform class?
    When using the PHP MM_XSLTransform to transform some XML into
    HTML, the XML declaration is faithfully delivered, which is
    expected. In my case though this ends up in the body of the
    document and is not desired. I wish to choose that the XML
    declaration is not shown.
    I have tried to use the <xsl:output method="xml"
    encoding="utf-8" omit-xml-declaration="yes"/> in the XSL
    stylesheet but the declaration still appears.
    Any help?
    all the best
    Dave

    Jim20005 wrote:
    > I'm using XLS transfomation in DW for reading XML files.
    Now (I'm just back
    > form holiday), my webspace provider has updated to php
    5.1.5. I'm getting this
    > error:
    Comment out line 301 and add two new lines immediately after
    it like this:
    // $xml = DOMDocument::loadXML($content);
    $doc = new DOMDocument();
    $err = $doc->loadXML($content);
    This is part of a PHP 8.0.2 hotfix that can be obtained
    directly from
    Adobe support.
    David Powers
    Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    http://foundationphp.com/

  • How do u turn down the tick volume when using the remote control?

    how do u stop the ticking(clicking) when adjusting the volume using the remote control?

    Hi philippalldino,
    I understand that you do not wish to hear your volume feedback when adjusting the volume of your computer. Here is an article that will tell you how to disable this feature:
    OS X Mountain Lion: Turn off the alert sound for volume keys
    http://support.apple.com/kb/PH10762
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Why am I not able to use "selection" as a print range option when using the print preview feature? Is this facility available or am I doing something wrong?

    Having seleted some text on a web page which is the only information I would like to print, I seem to be unable to preview what the printed page will look like using the "Selection" option in the Print Range section of the "Print" Menu from the Print Preview window. The radio button for "Selection" is not selectable!
    I am able to do this using Internet Explorer, which is probably my main reason for using that browser but would like to use a similar feature in Firefox

    That connection is supported for tethering....
    Barry

  • HT202731 What should I do next when using the apple hardware test and it will not complete. It always gets frozen when 56 seconds of testing has passed?

    MY MacBook pro will not boot up correctly. When switched on a grey screen appears and a flashing question mark box.after researching I have been able to try to complete an apple hardware test by holding the D key when switched on. Unfotunately this text will not complete. Every time I try and perform this text it sticks after 56 seconds of testing and does nothing rlse. Resulting in my having to force shut down.
    I know do not know what else I can do to try and solve my problem.
    Any help would be grately appreciated.
    Thanks.

    I would install a new HDD, format it and install the OSX.  Then I would connect the old HDD via USB and see if I can access the files that are on it.
    If no success and if the data is important, look for recovery software on the Internet.  Most have a trial that will tell you the possibilities for retrieving data but then you will have to pay for the software.
    The last option is employing a professional data retrieval service.  That will be expensive with no guarantee of results.
    Ciao.

  • How to change embedding option when using the place command?

    When I try to place any file to illustrator (latest version) its automatically embedded. Is there any way to change that so the file will be linked and not embedded?

    yarontm,
    Second go (I posted this an hour ago, or rather it failed to post for some or no reason):
    Are you DoubleClicking the file? If you are, try just Clicking it.
    If you are just Clicking it and it just embeds, something is wrong.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Need SAP Authentication option when using the Open document URL methos

    Hi Experts,
            I had published a report into the BO Server. I can able to Login to the CMC & Info view through SAP Authentication. But, when I Try to Open the Report through the Open document or viewrpt URL, I am not getting the SAP option in the Authentication Drop down box. Kindly give me the solution to login through the SAP Authentication In the URL Method. Thanks for your support in advance.
    Thanks & Regards,
    Shiva

    Hi,
    the option has been hidden by default.
    Navigate to <BO_INSTALL_DIR>Tomcat55/webapps/openDocument/WEB-INF
    Open the web.xml file and search for "authentication.visible". Set the parameter from "false" to "true".
    Restart your Tomcat and you should be fine.
    Regards
    -Seb.

  • No send option when using the reply function

    Hi Folks
    Hoping you smart uber users can help me with my 'no send' issue.
    This is a new issue. I can only guess the issue (no send option) stems from the recent update of desktop manager version 4.3 I performed 3 days ago. 
    Desktop manager running on XP SP2 including all Microsoft routine updates. 
    Snapshot of the troubleshooting I attempted to fix issue.
    1. Remove and reinstall battery - issue still not resolved - and register again
    2. Options - for those who are novice, the icon looks like a wrench
    A)    Selected advanced options, then Service Book and deleted the all list in the service book except for   the provisioning option
    B)    selected Host routing table and selected register now
    Have any of you had a similar issue and can you help. thanks
    B

    Register Now wont resend service books to your device. Have your BES admin resend them (if applicable) or log into your BIS site and resend them to yourself.

  • How to change the search provider when using the Firefox Home Button Search feature?

    In Firefox itself I have configured duckduckgo as my default search provider.
    But when I use the Firefox Home Button Search it is always set to google and I do not see any option to change that?
    I like the Firefox Home Button Search (or whatever it's called) otherwise, but it's annoying that it does not use the default from Firefox.
    I use the Google Now Launcher.

    ''philipp [[#answer-704494|said]]''
    <blockquote>
    ...usually it will be enough to switch the default engine in firefox back and forth once to work around the issue...
    </blockquote>
    Thank you, problem resolved

  • How can I change the color of the highlighted text when using the FIND function in Terminal?

    When searching for text in the Terminal's buffer, the matched text is highlighted using a color which seems to be computed from the background's color. I'm using a black backgroud and the finder's highlighter is grey. How can I change this? I'd like to specify the foreground and background colors of the matching text. I couldn't find an appropriate setting in the terminal's settings, nor in the default settings using the command "defaults".

    In my .bashrc file, I have enabled a couple of grep environment variables.
    GREP_OPTIONS='--color=always'
    GREP_COLOR='00;38;5;226'
    The latter is a vivid yellow.
    From the shell, I can search my history:

  • Where to place the class file of the java bean when using the packager

    I am using the activex bridge in j2se 1.5.0_06
    now i have created the jar file for my bean but where do i place the class file?
    i.e the bean..if i keep it in jdk\bin the packager gives me an error..i created a folder in my public jre jre\axbridge\bin and placed the class file there too but even this didnt work
    Kindly tell me what is the fully qualified package bean name if i have placed all my files under jdk\bin..

    D:\Java\jdk1.5.0_06\bin>packager -reg d:\java\jdk1.5.0_06\bin\PersonBean.jar Per
    son
    Processing D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\\Person.idl
    Person.idl
    Processing D:\PROGRA~1\MICROS~2\VC98\INCLUDE\oaidl.idl
    oaidl.idl
    Processing D:\PROGRA~1\MICROS~2\VC98\INCLUDE\objidl.idl
    objidl.idl
    Processing D:\PROGRA~1\MICROS~2\VC98\INCLUDE\unknwn.idl
    unknwn.idl
    Processing D:\PROGRA~1\MICROS~2\VC98\INCLUDE\wtypes.idl
    wtypes.idl
    Registration failed:
    The packaged JavaBean is not located under the directory <jre_home>\axbridge\bin
    this is the error i get

  • Why is the amplitude smaller when using the Extract Single Tone VI to measure the amplitude of a signal?

    Whenever I measure the amplitude of a signal using the Extract Single Tone VI, the amplitude is smaller than if I measured the signal by hand by positioning the top and bottom cursors to the highest and lowest peaks of the captured waveform.  Should I not use the Extract Single Tone VI to measure amplitude?  I'm using Labview 6i.

    I'm not exactly sure but I think the amplitude from the Extract Single Tone vi is in peak volts (Vp).  When you use the cursors on a scope set to the top and bottom peaks, you are measuring volts peak to peak (Vp-p).  If the Extract vi amplitude is one half of your scope reading, then this is true.  Just double your Extract vi amplitude to get the peak to peak voltage.  It also depends on the signal.  If your signal is a square wave from 0 to 5 volts (TTL), this is usually measured in peak voltage.  A sinewave going positive and negative (from -5 to +5) is usually measured in peak to peak.
    - tbob
    Inventor of the WORM Global

Maybe you are looking for