HT1688 when I use my iphone, the password popup is always popping up!!! Never stops... What gives?
The Popup always says,,,," incorect password" When I hit cancel it goes away but comes right back... and when I plug it into my pc it says no new pictures fowund on device...lies I say!!! Its a brand new iphone 5....ugh!!!
On the iPhone go to Settings > iTunes & App Stores.
Select your Apple ID and at the menu window that appears, select Sign Out.
Follow this by signing back in with your Apple ID there.
If this is for an email account that you are accessing with the Mail app, you need to re-enter the password.
Regarding the PC indicating there are no pictures found on the device when there are some photos in the Camera Roll, the lying is being done by your PC.
Similar Messages
-
HT1430 when I check for mail the iPod continues to go around but never stops with new mail
When I check mail it rotates but never stops with new mail
Maybe you dont have any new messages.
-
My cover albums o iTunes are just fine But when i sinc my iPhone the covers get All wrong and mixed up. What can i do?
Perhaps you should ask over in the iPad community, you may get better answers there.
It's actually my fault that psoon ended up here ... s/he intially posted over at Home Sharing, and I tried a relocate request to Apple TV rather than iPad.
psoon, here's a link to the iPad community:
Using iPad -
I created a new ID for my Iphone, because the old ID was an email address I no longer have. Also, the phone wouldn't recognize the password I have always used. Now the problem is when I try to update my apps, it automatically wants to use the old ID. I've set the new ID for the phone, but it defaults to the old one when asking for a password to update apps.
That's because all apps are forever tied to the Apple ID used to obtain them, & can only be updated using that ID.
To use your new ID with these apps, you'll have to delete them, then repurchase. Or, contact iTunes support, explain the situation, & ask that they add these apps to the download queue of your new ID. -
When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??
It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond. -
My iCloud email address and my apple ID are different. I would like to change my iCloud to be the same as my apple ID. However I don't know my iCloud password and don't use the email address it belongs to. When I try to change the password, apple brings me to a page to reset my apple ID password (which I know and don't want to change). I have even tried to delete my iCloud account completely to start again but am not allowed without the iCloud password (which I don't have) there doesn't seem to be a place to change the email address of iCloud. What can I do?
This is the answer that I had expected, so in this case you could only change your gmail.com address to another providers email addres e.g. outlook.com, yahoo.com, etc., but you won't be able to change the gmail.com address to a icloud.com email address. Apple just won't let you do that.
Your iCloud account with @icloud.com email address and you Apple ID with gmail.com address are already connected and as I said before, Apple just let you merge this two IDs together. -
Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
What's wrong with my iPhone? I put it on the charger it's says it's charging but nothing happens and when I use it while it's charging it starts to die and stops at 1%
Please help
-
I have a 6d and when I use it with the iPhone app the camera turns off after about five minutes and the connection is lost. So when I am photographing wild life I keep having to break cover to reactivate the connection. Is this correct or is there a way to keep the connection alive.
You just need to go into the menu and set the camera's sleep mode to "off" or "never". It sounds as if it's currently set to 5 minutes.
Letting the camera sit active continuously, i.e. preventing it from going into sleep mode, will drain the battery(ies) a lot faster. I don't have a 6D, nor do I leave them on full time (in fact I set sleep mode to a very short duration, since tapping any button on the camera quickly re-awakens it).... so I really don't know how quickly a battery will drain. But you might be prepared with spares. If battery life is too short for you purposes, you could add a battery grip which will double the battery capacity.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM -
I have to reenter my Wifi password every time I restart my Ipod touch. It used to retain the password but now it drops out when I turn the Ipod off. Any suggestions?
Try:
ipod touch wont remember wifi password: Apple Support Communities
Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? -
Im using somebodies apple id.. When im going update apps, the password which one i have is not matching... What can i do for it? Plzz give me solution.
Im using somebodies apple id..
That is the problem. You are supposed to use your own Apple ID. If the person who owns the ID is not a user of your computer and will install the apps with the ID on the computer for you, you need to buy the apps with your own Apple ID and install them instead of the versions that you do not own. -
When I use my iPhone Siri for dialing, it is better to have the names in the address book listed singularly. But when I want to print envelopes from the address book in a formal manner - "Mr. & Mrs. Smith". Is there any way to have both options?
Only way I can figure is having double entries one with singular + some unique field, (maybe called Siri), then making a Smart group for one or both.
-
I barely have any apps, only 36 pictures and 600 songs yet my iphone says it's almost full in storage. But when I add up all the totals of my usage it's half of what my phonse says its using. whats up?
Connect to itunes and see where it says the storage is being used.
-
When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix
If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble swiping the screen to move to the next page. This is no longer working. I did not change any settings, the phone just started behaving this way. Any ideas on how to revert back to the single click selection/launch? Any assistant is greatly appreciated. Thank you!
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.
Maybe you are looking for
-
Receiving "Invalid char in text." error from file adapter
I'm testing a file adapter and am receiving the following error: Invalid char in text. The invalid character seems to be the ascii Record Separator character, Hex 1E, HTML Is it possible for me to modify the file adapter schema to handle this charact
-
How to remove boot camp partion after windows has been deleted
I have removed windows 7 from my mac book air. however the partition will not be deleted... how can I remove the partition.
-
Error installing SQL 2008 R2 anyversion. Error code: 1605
SQL Server Setup has encountered the following error: MsiGetProductInfo failed to retrieve ProductVersion for package with Product Code = '{DF167CE3-60E7-44EA-99EC-2507C51F37AE}'. Error code: 1605.. What I've done so far: 1) Had to re-install Windows
-
WLSE 1130 Release 2.13 - View configs for all in flat file
I am trying to get all of my device configs into a searchable format. For example cut and paste or search using windows for specific details in configs. In CiscoWorks I do this by looking for text containing and search the .cfg directory. How can i d
-
Hi Experts, How do you settle any labor costs. I have created a secondary cost element and tied it an activity type. In the work order I enter 2 hours of this activity. Can I settle these costs from a secondary cost element to a primary one? Thanks