HT1689 Am I able to find the date i purchased my iPhone 4s without the reciept?

I need to find out the date i bought my iPhone 4s but can't find the receipt, how can i get it?

I have figured my mistake I was trying with my existing apple id. I was able to select the None option when I tried to create a new apple id.

Similar Messages

I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

Those sites take a long time to load for me (almost a minute)
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

User is not able to find the receipt to correct it from Iprocurement.

User is not able to find the receipt for PO to correct it. User logged into iProcurement and queried for this PO but system says no data exists.
I checked there is a receipt for this PO and the same can be queried in Correction window through core APPS.
Could you please help why its not available in iProcurement for correction.
Thanks in Advance,
AVN

Are you logging into right organization (OU) to check the receipts?
Check your ship to location in PO and then based on that change your organization (through responsibility or change organization) then query yur receits, it should come.
BTW for receipts to be seen, the PO lines should not be in "CLOSED" status!
Jithendra

Not able to find the HR Integrator Function in the Function

Dear All,
I am not able to find out the HR Integrator function in the Functions. Kindly do i need to do any setups or any other things to get this in place.
We are using Version R 12.0.6
Thanks and Regards,
Joshna.

Hi Duncan,
Sorry for the late response.
Please find the issue below.
- we wanted to create an HR Integrator for the Requisition and vacancy. For this we find the steps in the metalink. Please find the steps below.
When we are doing 5 th step we are not able to find the "HR Integrator" in the list of values. So we went and check the Menu there we find that HR Integrator function is not attached to the Menu. We tried to call that function but we are not finding that Function.
1.Check your IE and Excel/Word Settings.
2.Select the ‘Desktop Integration’ Responsibility
3.Click ‘Create Document’ function
4.Uncheck the Reporting Checkbox as this integrator is for uploading. Select the Viewer as Excel
5.Select the ‘HR Integrator Setup’ as the Integrator.Click "Next"
6.Select Content as "None" as we need to create the blank document for upload and Click "Next"
7.Click on "Create Document "
8.Once the spreadsheet is created, enter the following details and upload it back into the system.
Metadata Type : DOWNLOAD – to create download integrators
UPDATE – to create download / upload integrators
Application Short Name : PER
Integrator User Name : <User Defined Name for Integrator>
View Name : <User Defined View>
Form Name : Name of the Form to which the integrator is to be associated
API Package Name : API Package Name used to Upload Data (Only for UPDATE Integrators)
API Procedure Name : API Package Procedure (Only for UPDATE Integrators)
API Type : PROCEDURE / FUNCTION
Click on Oracle -> Upload to create the integrator
9.Define a Function using System Administrator -> Application -> Function. This function will be used to restrict the Responsibilities for which a particular integrator is available.
Function = Internal Function Name
User Function Name = User Defined Function Name
10.Create the Form Function Association Document using Web ADI Menu –Desktop Integration -> Create Document
Select Integrator as "HR Maintain Integrator Form Function Associations" and repeat step 4
11.Select the application in which the integrator is defined and the Integrator User Name for the Form Function Association has to be done. Click Next to continue.
12.Click on "Create Document" and Attach the Form Function created in step 9 i.e.Internal Function Name to the Integrator in the document created in the above step and upload the same.
13.Define the Layout for the Integrator created in above steps using
Desktop Integration -> Define Layout
14.Select the integrator for which the Layout has to be defined and click Go to continue.
15.Select the columns that will be displayed and click Apply
16. Navigate to the Form which you have attached in step 8 and Click on Export Icon.
You will be able to view the Integrator.

EDQP: After creation of Item definition, not able to find the the same item in Standardize items tab.

Hello Experts,
This is the first time am creating the item definition in the data lens, after creation of item definition, thought of standardizing it through Standardization Items tab. Not able to find the created item definition in the Item Definition Field LOV.
Do we need to do any set up to get it available in the Standardization Items tab. For information, I found two things as follows
1.this item has not assigned to any of sample data records.
2.Did not find created item definition name in the Item definition field..( It has showing only text as 'Not Item Definition')
Can any plz help me in creating Item definition completely. After gone through the Knowledge studio ref guide developed to some extent.
Thanks,
SSagar.

Can you put some screenshots of what you did and what you are seeing?

If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.

Question
If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
Screen 2/3 blanco on the left side
With F11 all OK.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages)..... Do the following have free copyright

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

HT201272 I recently got a new computer and authorized it. I have only been able to find the newest of purchases. I am missing hundreds of downloads/playlists and cannot get them to sync from my ipod. How do I locate all my playlists?

I have hundreds of songs, most of them purchased from the ITunes Store. I am only able to find the newest of purchases. I have a new laptop (my old one died) and have de-authorized the old PC and authorized the new one.
I thought I might have two separate id's, for some reason, but am unable to find any info re the possible second one. i.e., cannot log in, apple does not recognize it as a user id.
Everything I have/had is on my IPod but I am unable to migrate the music from the IPod to my PC. I have downloaded all the updates for the PC and the IPod. I am at a loss as to how to recover my music and cannot find a way to contact anyone at Apple without having to pay a fee.
Any help will be greatly appreciated.
Thanks,
Judi Dupree

NicoleDianneAgnes wrote:
... I haven't yet gotten rid of the old computer, ...
That is good News...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also... Have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

My iPad has been erased. I am not be able to find the prevues owner to use the iCloud account to activate my iPad. If there is a way please help me.

My iPad has been erased. I am not be able to find the prevues owner to use the iCloud account to activate my iPad. If there is a way please help me.

No, there isn't. If possible return it to whomever you purchased it from and get your money back. Otherwise, you have a very expensive paperweight that is of no use to you.

How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.

How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.

Use the media browser. In every open/attach window in tithe lower left hand corner under media ==> photos ==> iPhoto
LN

Not able to find the created BI System

Hi,
I have configured the BI System as in the document.
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
I am having few doubts.
1. Whether we need to choose only SAP system with load balancing template.
2. Whether we can set
BI Directory Provider: No
BI Master System: No
And also one more thing, I am using UIDPWD logon method. Whether there will any problem with this
I need clarifications on these.
Also after doing all these things i am not able to find the created BI System in VC.
When i test the same in Portal, it is saying the connection is successful..
Anyother step needs to be done, after this in configuration. Please let me know.
Please help me to resolve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 12, 2008 1:41 PM

Hi Inna,
Thanks for the reply.
But in Portal I have done the User Mapping between Portal Server and BI System.
I am using BI 3.5 System, Whether there will be any problem?
The BI Kit is already installed and i am able to view the components.
Still i am not able to get the System that i have created in portal into VC 7.1.
I am only getting Web Services created in that system and Service Registry and Visual Composer Models in Search Tab.
Whether we need to create a RFC destination also for this BI system?
Please help me to solve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 15, 2008 4:44 PM
Edited by: Palani Appan on Sep 16, 2008 9:42 AM

I purchased my first iTune song on my computer in FL. I am now back in IL. Am I able to find the song for my IL computer?

For the first time I downloaded iTunes on my computer in Illinois about 2 months ago. I never bought a tune. I went to Florida and downloaded iTunes on my computer in Florida. I then purchased my first iTune. When I came back to Illinois I thought i would be able to find the song I had downloaded in Florida but I cannot find/access it. Did I do something wrong by not preparing the song while in FL for access in IL? Can I access the song now from my IL computer? Thanks.

Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

FindClass() not able to find the class in the same path

Hi,
I have a c prototype which calls a java function which push a message in JMS. i'm using jdk1.6. i have set JavaVMInitArgs vm_args.version = JNI_VERSION_1_6 when i compile the c code as gcc -g -lgcj -I $JAVA_HOME/include -I $JAVA_HOME/include/linux CallJMS.c the JNI_CreateJavaVM(&jvm, (void*)&env, &vm_args)* returns JNI_ERR. After changing version to 1.4 JavaVMInitArgs vm_args.version = JNI_VERSION_1_4 finally it gives me an executable which calls the java function (how ever the required functionality is not got)
To get the required functionality i had to use jdk1.6 so i changed the version property to JNI_VERSION_1_6 and the compiling command as gcc -g CallJMS.c -I $JAVA_HOME/include -I $JAVA_HOME/include/linux -L $JAVA_HOME/jre/lib/i386/server -ljvm .This gave me an executable, but when i execute it is not able to find the java class file. I have kept both the java and c file in the same path and also set the CLASSPATH. Please help.

Hi jschell,
I got solution to this problem. As you said it is due to wrong CLASSPATH set .
Before:
JavaVMInitArgs vm_args;
JavaVMOption options[3];
options[0].optionString = "-Djava.class.path=.:/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes";
options[1].optionString="-Djava.library.path=.:/home/program/jdk1.6.0_23/jre/lib/i386/server";
options[2].optionString="-verbose:jni";
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 3;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
I was setting the CLASSPATH to the Path where my java class files were kept. When the JVM instance is created only this path (where my java class is residing) is identified and the JMS and other paths which was already set in the CLASSPATH environment variable is lost. Thus when i call the java class from the c program it is not able to find the dependent class files and it was aborting.
After:
Before setting the path where my class files are residing to CLASSPATH, get the path's in the CLASSPATH to a variable, append the path where my class files are kept to this variable and then set the CLASSPATH . Similarly do for the LD_LIBRARY_PATH. This works fine.
char cpathBuff[100000];
char ldpathBuff[4096];
JNIEnv *env;
JavaVMInitArgs vm_args;
JavaVMOption options[3];
cpath = (char*) getenv("CLASSPATH");
sprintf(cpathBuff,"%s%s:%s","-Djava.class.path=",cpath,"/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes");
options[0].optionString = cpathBuff;
ldpath = (char *)getenv("LD_LIBRARY_PATH");
sprintf(ldpathBuff,"%s%s:%s","-Djava.library.path=",ldpath,"/home/program/jdk1.6.0_23/jre/lib/i386/server");
options[1].optionString = ldpathBuff;
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 2;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
Thanks for your support Peter and JSchell.
Edited by: 844094 on Mar 15, 2011 2:37 AM

Not able to find the required upgrade patch for 10.2.0.2

Hi all,
I am trying to upgrade my database from 10.2.0.1 to 11.2.0.2, for which first i need to upgrade it to 10.2.0.2. But am not able to find the same in the support.oracle.com , please advice.
Platform details :
[ora10g@www ~]$ uname -a
Linux www.benefits.com 2.6.18-164.el5 #1 SMP Thu Sep 3 02:16:47 EDT 2009 i686 i686 i386 GNU/Linux
Database details :
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Thanks and Regards,
Littlefoot

The 10.2.0.2 patch is 4547817 - see this MOS Doc
Quick Reference to Patchset Patch Numbers [ID 753736.1]
HTH
Srini

HT1689 Am I able to find the date i purchased my iPhone 4s without the reciept?

Similar Messages

Maybe you are looking for