HT1689 Can u add wifi to an ipad2 after u bought it?

Can u add 3G wifi to an iPad 2 after u bought it?

See the link below.
http://www.wireless.att.com/businesscenter/devices/att-mobile-hotspot-mifi-2372. jsp
Other cellular providers may have similar plans/devices.

Similar Messages

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

Can you add memory to an iPad after purchase?

Can an IPad purchased with 16GB be bumped up later to 32GB?

You can't add RAM or storage capacity, or add 3/4G to a Wifi only iPad.
 Cheers, Tom

Can't get wifi working on X201 after installing Win 7 64 bit

I've just purchased an X201 type 3294 with a 320gb HDD running Windows 7 64bit. Wifi works fine when running from the original HDD. I've pulled the HDD and replaced it with an SSD and installed windows 7 64 bit so I can use the 4gb RAM which came with the computer. I did a fresh install then started trying to install drivers. I started with Wifi first so I could download the rest of the drivers directly to the computer. I can't get wifi working after installing Windows 7 64bitfor some reason. I have the original HDD in an external enclosure so I can still access it.
I can't figure out what drivers I need, or even what adapter I have on the computer.Lenovo's part look up tells me the adapter is part number 60Y3231, but that information seems to be useless. I've tried most of the drivers on Lenovo's driver page. I've tried just copying the C:/Drivers folder from the original HDD, and just about anything else I can thinkof.
Anyone know how I can get the right driver, or if this is even a driver problem? For what it's worth I'm not afraid of having to learn some terminal if I have to but I'm totally unfamiliar with Win 7. I have much more experience with XP, Vista and OSX/some Ubuntu.
Solved!
Go to Solution.

Hello and welcome,
If you have a wired connection you could try installing ThinkVantage System Update. Run it and it should find all the appropriate drivers and install them for you.
That FRU seems to be an Intel Centrino Advanced-N 6200. It's hard to tell from the drivers page which one to use. Most of the README files include 6200. My best guess: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g1w218ww_s64.exe
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How can I add wifi & bluetooth to late 2006 Mac Pro

I have a dual 2.66 Xeon Mac Pro purchased new in December 2006. I wanted to add the airport wifi and bluetooth card but have been told by the technical line that Apple no longer makes these. They suggested I would have to pursue a third party solution which I find remarkable.
Does anyone have any suggestions as to how to go about this or practical experience in doing it?
Cheers,
Gord

Look on eBay or search Google. You can check ifixit.com to see if they carry the part. You should be able to find online tutorials via Google on how to install it. Some disassembly is required.

Can I add 3g facility to ipad2 with wi-fi

I have purchase ipad 2 with wi-fi but I need to add 3g sim slot to it is that posible? If not can I get it replaced with 3G wi-fi by paying the extra amount as I have purchased it just 2 months back by paying needed extra amount. Please do the needful.
Thanking
Vamsy.

No, but you can get a 3G mifi or hotspot device from your carrier then connect your iPad to it using wifi. The mifi/hotspot device connects to the Internet using 3G and your iPad connects through the mifi/hotspot.

How can I add a keyboard to iPad2?

My ipad does not switch to my separate keyboard. What setting should I use to add the keyboard ?

Thank you to Skydiver and Lexschellings. I was puzzled because my keyboard used to pair but now it doesn't. I tried turning Bluetooth off then on, but pairing didn't work. It is embarrassing that I didn't think of the battery, a simple thing. A new battery seems to be the last option, since normal pairing won't work. May be the battery not holding a charge, but it still won't pair even when keyboard is directly connected to a power source. I shall buy a battery and will let you know if that works. So thanks again.

Can I add a Lion Recovery Partiton After Install?

I just upgarded the hard drive in my MacBookPro8,2. I have both my old bootable drive (bootcamp, so 10.7.2 + Win7x64) and a networked Time Capsule with a recent profile I can restore from. I also created a fresh Lion install CD using the commonly available tricks, which is what I used to install Lion on my new drive. Unfortunately the installer had some problems with the fresh drive and required me to manually partition it. That's fine, but I only created a single partition, installed, recovered my profile via Time Machine, and Lion is now running just fine. Unfortunately I don't have a Lion recovery partiton or a Boot Camp partiton (yet!).
I know how to repartition the drive to get Boot Camp some space when the time comes. I also know how to use Disk Utility to get me a 1gb partition that could potentially be used for the Lion Recovery partition, however, this leads me to two questions:
(1) How do I manually create a 650MB partition for Lion Recovery, since Disk Utility's GUI only goes down to 1GB increments. I ask because the OEM partition is precicely 650.0MB and I'd prefer to make things as stock as possible and/or not waste any space.
(2) How do I create the bootable Lion Recovery Partition "after the fact"? I see plenty about how to create an externally bootable Lion Recovery USB drive (which I did and have available if necessary), but I don't see anything about how to make a recovery partition on my internal drive (which is required to run Find My Mac correctly, but I just plain want it anyway).
About Lion Recovery
Another guy having a similar problem to me, but not exactly the same. May be relevant.

baltwo wrote:
AFAICT, you have two partitions, one for Lion and one for Boot Camp. The installer will only see the Lion one. Run this commend in the Terminal and post the results:
diskutil list
Nope - sorry, maybe I was a bit unclear. I only have 1 partition right now. I was simply trying to say [in my first post] that I know how to manually add a partition for Boot Camp. With that said, I haven't actually done it yet. To be even more clear, here's my partition information:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            750.0 GB   disk0s2

Can we add new cubes and ODS after creating the multiprovider?

Hi all,
i created a multiprovider on a cube and ODS. Now i needed one more charactersitic from other cube.then i did change multiprovider and then add that new cube and did the identification, and adjusted the query, when i ran the query it is showing chracteristic as # and not assigned. I even tried bringing in 0infoprovider object to see whether data is coming from third infoprovider, it is not showing up any data from third one. i tried logging out of bex and logging back in.....but still no use..............i am wondering now, once a multiprovider is created can new infoprovider be added to it ?
i am even able to see the new key figures and chracteristic in my query.but data is not getting populated...i also checked and found that the data is available in the infoproviders....
plz help me out..
points will be assigned for inputs

Hi Bhanu,
nice to see your answer, I saw a lot of helpful posts on SDN by you.
I did the RSRT with debug multiprovider, it said,
0FISCPER: General restriction for InfoProvider ZSD_C12 not possible
Access to ZSD_C12 was excluded
now i corrected it, it is populating the key figure now but not the chracteristic still.....the chracteristic is still getting value only from one of the info providers
importantly, when i bring infoprovider above the keyfigures space on query, it still only shows two info providers for each key figure and not the third one ,the key figure coming the third one is only shown in overall result. how can i solve this?
i tried rsr_gen_direct_all_queries as told by krian, but still cant get the data in the report. i did list cube on mulitiprovider and i see the data for that chracteristic there....
are there any other options in RSRT to find possible setting faults....
thanks in advance
points will be assigned for inputs

Can not add nokia 6670 to isync after 10.4.7

with 10.4.6 it worked. Pairing no problem and also Adressbook was accessible. In 10.4.7 I can pair the phone with the mac, but only isync and internet acces are mentioned in the bluetoothe connection assistent.
when I open isync and trying to add a new device, it finds the phone with a "yellow button", but says it cannot add it because it canot esatblish a connection.
Does anyone have this problem, too?
thanks,
wolf

It did not work.
Deleted all the pairing. Paired again. (Adressbook
support was not mentioned again, only isync)
Restarted macbook and nokia. Tried to add it to isync
again. Isync said it can not connect to the Nokia
(yellow dot)
Not I don't know what else to do. It seemed to work
under 10.4.6.
Weird!
wolf
I have the same phone, a Mac Pro and an old G4 and am having the same problem and I know why. There are two versions of the Nokia 6670: a Nokia 6670 and a Nokia 6670b... we have the 6670b and it isn't supported by iSync.
On older versions of iSync, you could hack iSync to see the 6670b as a 6670 by adding a few lines of code but it doesn't work on the latest versions of iSync. On my old G4, I kept the last iSync version that worked, out of the Application folder to use and din't use the updated iSync in the Application folder that get's updated on every OS updates and security updates.
Now, zoom forward to last week when I got my Mac Pro... The UB iSync cannot be hacked and the old PowerPC iSync that worked won't work on the Mac Pro. So I need to remote control my old G4 and sync it with my phone, then sync the two computers. A serious PITA!

Can't add songs to iPod Touch after updating to v2.0

I just updated my iPod Touch to v2.0 and now I cannot load any songs onto it. When I drag songs or playlists over the Touch in the iTunes Devices list they just bounce off. Everything else seems to be acting properly. Contacts, Photos, etc. sync/update just fine.
I had this problem before after updating to Leopard. I can't find the thread I used then. It walked you through a process of deleting some file in the User>>Library folder before reinstalling iTunes. Unfortunately I don't remember which file(s) need to be tossed.
Anybody know the sequence or have a link to the earlier thread?
Thanks...
John

An update...
Having nothing left to lose, I trashed iTunes and reinstalled it. Now I can at least sync Playlists. I'm not sure why I can't drag songs onto the iPod touch.
Still waiting for help on that one...

Can't add content to ScrollPane immediatly after attachMovie

Hello,
I've successfully attached a clip (identifier = "myPane_mc") which contains a ScrollPane (instance name = "myPane_sp") to the main Timeline from the Library. No problem.
attachMovie("myPane_mc","myPane_mc_01",getNextHighestDepth());
However, I can't immediatley load another clip (identifier = "myPic_mc") into the ScrollPane.
attachMovie("myPane_mc","myPane_mc_01",getNextHighestDepth());
myPane_mc_01.myPane_sp.contentPath = "myPic_mc";
Is this particular to the ScrollPane component? It works fine if I place the contentPath code in the next frame of the Timeline, but is there a function that I can attach to myPane_mc_01 to load myPane_sp's content without the additional frame?
Thanks!

It can take a little time for components to come into existence when they are added dynamically, so one way to get around this with code is to put a slight delay in before the command is executed using the setTimeout functtion... Try...
attachMovie("myPane_mc","myPane_mc_01",getNextHighestDepth());
var sto = setTimeout(setContent, 100); // 100 msec
function setContent(){
myPane_mc_01.myPane_sp.contentPath = "myPic_mc";

Lenovo g550 can't use wifi or video card after clean install of windows 7 from generic iso

My hard disk crashed and I didn't have the restore cd, and windows doesn't see the WIFI or Video card now. I've updated the drivers from support but it still work see them. I haven't tried updating the bios version yet. Is there a step i'm missing?
Solved!
Go to Solution.

Hi Ryan!
Welcome to the forum. Please post a picture of device manager. That will give a much better idea of what's missing.
It is always best to install drivers in the following order. Chipset, Audio, Video, Ethernet, Energy Management and then the rest.
http://support.lenovo.com/en_IN/research/hints-or-tips/detail.page?DocID=HT072728
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an Accepted Solution

Can't add a "other" email account after deleting my business email account, casio commando

My business email account was having issues sending and receiving so I deleted it hoping to add it back and start fresh. When I go to add a "other" email account, it doesn't take my email address or password. I try settings, accounts & sync, add an account and I only have 3 options; corporate/exchange, backup assistant and google. None of those are what I need. Help...

My business email account was having issues sending and receiving so I deleted it hoping to add it back and start fresh. When I go to add a "other" email account, it doesn't take my email address or password. I try settings, accounts & sync, add an account and I only have 3 options; corporate/exchange, backup assistant and google. None of those are what I need. Help...

HT1689 Can u add wifi to an ipad2 after u bought it?

Similar Messages

Maybe you are looking for