HT1689 Does anyone have experience downloading audio books while in Europe from a U.S. account?

Does anyone have experience downloading audio books in Europe using a U.S. account?

The terms of the iTunes Store state that you agree not to use or even attempt to use the US iTunes Store from outside the US. Sorry, then, but we cannot discuss that issue here.
Regards.

Similar Messages

Does anyone have experience with error 504 when trying to download a podcast?

Does anyone have experience with error 504 when trying to download a podcast? I've been a subscriber for two years without issue and in the last two days can't download this particular podcast (everything else is working fine - music, other podcasts, etc)

The album was released on the 27th March this year, so the error occurred almost immediately after it was supposedly available.
In the manage pre-orders section of my account, it says AVAILABLE but does not give me any choice over whether to download it, just to cancel it. Is this normal?
iTunes customer services reset my password and tried to download the album themselves, but they also got the 5002 error, so it's been passed off to the engineers. How long does that usually take?
If anyone has any other suggestions, it would be greatly appreciated.

Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1 I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders. I've used Sony tape based camcorders in the past. I'm looking for High Definition. I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible. I would like to download directly from the camera to FCE. I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia? And if not, but you really like another camcorder that you can recommend, what is it?

The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
One note, however, the Vixia HF M52 supports a number of different shooting modes. I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE. FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

Does anyone have experience connecting Phonak Compilot Base station to AppleTV?

Does anyone have experience connecting Phonak Compilot Base station to AppleTV? AppleTV only has digital audio output and the base station only has a single RCA I/P audio connector.. I already have DirectTV and the BluRay player connected (on individual RCA I/P cables) and these work fine..

You would need to look for a DAC and go through the optical port on the device.

Does anyone have experience with having multiple editors work on the same project from different computers?

Does anyone have experience with having multiple editors work on the same project from different computers?

As much as I hate to admit it, YOU ARE RIGHT!
I will tread lightly on this project.
Thanks for the sanity check,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Photoshop cs6 won't allow me to highlight my existing text layers. Does anyone have experience with this problem?

Photoshop cs6 won't allow me to highlight my existing text layers. I select the text tool and the text layer I want to edit, hover over text and each time I attempto to edit a new layer is created. Does anyone have experience with this problem?

Be sure you go to Adobe's Web Site and make sure there are no Updates for CS6
http://www.adobe.com
Remember if you have trouble with a software issue it is the software and not caused by the Mac you are using
Many users simply don't remember when you upgrade software you normally have to go to 3rd party web sites and update software as well.
Cheers
Don

Does anyone have experience with unzipping a password-encrypted ZipFile??

Does anyone have experience with unzipping a password-encrypted ZipFile??
My Zip Class works fine with every unencrypted file, but when I try to open an encrypted one, i get an error Message ("Encrypted ZIP entry not supported")
Is ist impossible to unzip encrypted ZIPs???

I've searched around a little bit and THIS IS THE SOLUTION!
There is a (beta)version of winzip8 that uses a cli (command line interface)
So, all you have to do is to implement a Runtime.getRuntime().exec(...) in your java program to call winzip8 and pass the zipfile path and the password.
Here's the URL: http://www.winzip.com/wzcline.htm

RE: (forte-users) Does anyone have experience using OracleLarge Objects

hi ,
A few months ago, I tried a oracle stored procedure with a BLOB parameter,
but Forte(3.l2) could not recognize the blob variable. I used oracle 8.0
hth
suma
-----Original Message-----
From: Amin, Kamran [mailto:kamran.aminlendware.com]
Sent: Thursday, March 29, 2001 2:40 PM
To: 'Forte User Group'
Cc: Magaliff, Bill
Subject: (forte-users) Does anyone have experience using Oracle Large
Objects (LOB's)?
Does anyone have experience using Oracle Large Objects (LOB's) -
specifically the CLOB datatype? Forte supports Oracle LONG's but given that
Oracle is going to phase out that datatype and they're trying to push users
towards CLOB's instead of LONG's, I want to find out if Forte can handle it
and, if so, what we should know about mapping Forte datatypes to the Oracle
CLOB. [Their compatibility matrix for v3.5 indicates suppport under Oracle
8.1.x, and CLOB's were introduced back in 8.0.x - but the word from Forte is
that they currently don't support it.]
thanks in advance.
ka
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Hi,
Did you get any solution to this. If yes, please share.
Thanks,
Tints

Does anyone have experience with Virgin or Boost Mobile?

I have been with verizon for a long time...I have 4 lines with this service. I have since bought several phones off of craigslist or ebay just so I wouldn't have to be subjected to the tier plan. We use so much data it's crazy. I want the new Samsung Galaxy S4 so bad!!! Grrr! I've even thought about switching to Virgin Mobile or Boost Mobile. We pay so much for our phones now and I know of one guy who has boost mobile and loves it. Does anyone have experience with these providers?

BC's CRM is part of the package, Salesforce is of course more dedicated. That pretty much sum's up these sorts of use cases.

Does anyone have experience with migrating applications from iAS6.0 SP2 to SP3? Did it go smoothly or are there problems to be expected?

Hi,
I haven't. But, there are lots of changes from each service packs,
henceforth you may have to stick to what the documentation says to avoid
the errors that shoots up. Again, the errors depends upon how you have
coded your application. Please let me know if you have encountered any
errors and the messages for me to help you.
Regards
Raj
Peter Clijsters wrote:
Does anyone have experience with migrating applications from iAS6.0
SP2 to SP3? Did it go smoothly or are there problems to be expected?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Does anyone have experience with Iogear GBU 421? My MacPro has no in-built Bluetooth.

Does anyone have experience with Iogear GBU 421? My MacPro has no in-built Bluetooth.

My 2010 Mac Pro does have built in bluetooth but I use the IOGear GBU421 instead. That's because the built in bluetooth on the mac pro suck$ if you are more than about 3 feet from the machine.
See the descussion: Poor Bluetooth reception and jerky mouse
It works but you need to get used to its "quirks". If you sleep your machine like I do the dongle is off because there is no USB power when sleeping for the dongle. So you need some wired USB device to wake the machine. In my case I use my wired keyboard.
When waking up it doesn't always become paired immediately (maybe 30% of the time). Then you need to flip the mouse switch to get it active. Interesting enough I don't have that problem with the trackpad.
Most of the time, in the rear occasions I reboot my machine, the mouse is ready to go.
Once you get used to the "quirks" it's no big deal. Hey, for about $9 what do you want?
By the way I also always keep a wired mouse attached as a backup.

Does anyone have experience for disk damage and loss?

Does anyone have experience for disk damage and
loss for B1? What's the procedure to get new one?
Any cost involved.
Regards,
Kenneth

Hi Kenneth
Usualy we take the strongest measures to avoid that and never let it come to that. You should of had back up's running on and off site. How bad is your problem?? I'm assuming you are talking abou a hard drive that is faulty. Have you tried restarting in Safe Mode??
You get experts that can retrieve data from a hard drive depending how bad the problem is. It usualy cost more than the Hard drive......but if you are desperate and value your data you'll do it.
Hope this helps

Does anyone have experience selling or giving away their Nano?

I'm considering selling my Nano and hope to replace it with a Touch. My question is, what do I need to do before selling the Nano to a buyer? Do I need to do any preparation?
What does a buyer need to do to make a used Nano his? Can I just give him the Nano and say download iTunes? Do I need to "release" the Nano in some way?
Anyone have experience with this?

Do you really want to give your buyer some games from iTunes?!?
But maybe that's not such a bad idea, the buyer might be more likely to buy your iPod if games are on it, but if you give him your iPod the games will be synced over, and erased. Select +"Enable disk mode"+ and drag-and-drop your games from iTunes onto it. Then he can drag the games to his own iTunes library.

Does anyone have experience of the OWC Mercury Extreme SSD?

Hi everyone
I read Lloyd Chambers [interesting article|http://macperformanceguide.com/Reviews-SSD-OWC-Mercury_Extreme.html] about the Mercury Extreme. In particular he seems to have found very little performance degradation with heavy use.
I guess this would make us Mac users very happy since TRIM is unsupported by OS X (or have I got that wrong?).
Does anyone have real-world experience of this SSD yet?
/p

I could be wrong - but my understanding is that GC and TRIM are two separate things (and the need to do them with the new OWC drive as well)
GC is a way to re-organize the data to avoid using blocks that were marked as part of the write amplification done on the drive. (i.e. to write 1mb, you had to actually write 1.3mb on the device - and how to re-organize the .3mb when the file is overwritten)
TRIM actually clears the blocks that are no longer in use when a file is overwritten or deleted. The problem is that the device has no way to know what to clear - it needs to understand what the OS requires and what it does not require... and so it can't do it by itself as it needs to be aware of the filesystem. (NTSF/ZFS or in our case, HFS+). Instead the firmware just makes available the ability for the OS to go ahead and clear the bocks... that is TRIM support - the OS has to now delete the file (from the FS table etc) and then issues a TRIM on that file, allowing the device to clearing the blocks that are excessively used by the operation.
In the case of the OWC - there is no much technical information out there to describe how it trims without knowing anything about the filesystem. Mind you - its not been out long enough to get tested by a large number of people. Some think that its using part of the cache to handle these cases - (if you know the ratio of amplification, then you could build a large cache to deal with the physical space)
I think the secret for the OWC drive (and the OCZ Vertex 2 Pro) is the write amplification - which is less than the one from Intel. The less write amplification - the less need for GC and less blocks you need to clear by TRIM. A Harddrive has an amplification ratio of 1, OWC has (I think) 0.6 and Intel 1.1 - how do they achieve 0.6? On the fly compression and deduplication of data streams... (similar to what ZFS does at the filesystem level). I think part of the OWC 56Gb cache is used for the deduplication reference table as well... but when doing this - you have to be 2x carefull - if you loose part of the deduplication table for example, you loose not one file to corruption, but a huge chunk of your harddrive... as that pattern could be found in a lot of places... BTW - that is also how they achieve better longevity, they have to write less data that is produced... less writes, more life.
Now - as of experience - none... I think it's a nice drive... It seems they have taken some thought on setting apart a large (18%) of their drive to avoid problem and try to suck all the performance possible. But its still the basic SSD drive - just with hardware compression to minimize the impact. OWC obviously does not make them - some one is OEMing them for them. The support is what I would wonder on this drive. But based on Lloyd's experience, it seems to be a good contender on your list.
Just remember to backup often..

Does anyone have experience with laptop/computer tracking software?

Hi all,
I travel a bit for work, and the last software I bought for this purpose turned out to be completely useless.
The laptop is "located" usually nowhere near where my computer actually is, in fact I can't remember the last time the location was correct.
In the past 11 months my laptop was "located" in South Carolina when I was actually in New Orleans, Colorado when I'm in Wisconsin, and Eau Claire, Wisconsin when I'm in Madison, WI.
What use is a computer tracking app if it can't get the computer's location right?
I've heard about Project Prey, or Prey software--does anyone have any experience/feedback with this tracking software?
BTW, the tracking software I last used is MacPhoneHome--avoid at all costs.
Whenever I tried to contact them to try and figure out the issues I'm having, my correspondence was ignored until the fourth or fifth attempt, and when they did respond to me it took weeks for a response, and the response was always a very unhelpful, unsatisfactory answer.
And after all the time and frustration (and expense) of dealing with MPH, the software still doesn't work correctly.
Take care,
Brian

The OS X app is called Find My Mac. All you need to do to enable it is
go to System Preferences > iCloud and check Find My Mac.
You can then track it (and your other registered Apple devices) using iCloud.com.
I highly recommend it. It has features to disable itself or wipe itself clean if lost or stolen.

HT1689 Does anyone have experience downloading audio books while in Europe from a U.S. account?

Similar Messages

Maybe you are looking for