HT1689 error 42408 how can i correct it
How can I correct the error code 42408
314214
Why are you posting this question several times? You got a perfectly good answer from V Garcia in how can I correct it?. You are cluttering up the forum and wasting my time.
Please learn to use this forum properly.
Regards, APC
Similar Messages
-
When attempting to sync my ipod I get an error OxE8004002 how can I correct this error
When attempting to sync my ipod to my pc, I get an error OxE8004002; how can I correct this error?
It is just since I uploaded the 6.1.5.iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
-
Some times after along while it will work properly. I use AOL as my
home page. When I go back to using Internet Explorer everything works fine.cor-el, thank you, followed your instructions, working fine. I like firefox a lot, but was getting frustrated trying to forward e-mail. Always had to go back to internet explorer which is so much slower. I owe you.
Thanks Again,
lujog -
HT201302 error message when I try to update to IOS 6 how can i correct?
Error message when I try to update to IOS6 how can i correct?
Jenn4836 wrote:
Can anyone help me out?
Not unless you start by telling us what the error messages say... -
I just applied for an Account but they did not request my ISBN. I may have made an error in completing the information. How can I correct it?
Did you just apply for an account or did you try to upload a book? If you are simply setting up an account, they won't ask you for an ISBN number. They will, however, ask for your tax ID number. After your account is activated, then any time you upload a new book, you will need to supply an ISBN number. Since each book has a unique ISBN, they don't need those numbers to initially set up your account. I hope that helps.
Good luck!
Kara -
How can I correct the error Write Permission Open so that I can finalize a project in I Movie?
How can I correct the error Write Permission Open so that I can finalize a project in I Movie?
Post in the iMovie forum.
-
when attempting a restore from Time Machine I get error code -8004. What is this and how can I correct it? I use OX 10.9.3
ThanksRun it in compatibility mode and input the credentials.
Mylenium -
After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.
glennpsychdoc
What computer operating system is your Premiere Elements 12 running on? I suspect Mac because of the name your error.
Please read the following Adobe document with the details and fix for error U44M1P7
ATR Premiere Elements Troubleshooting: PE12: 12.1 Update Released
Specifically open the following link in the above
Update 12.1 installation errors | Photoshop Elements, Premiere Elements
Please let us know if that works for you.
Thank you.
ATR -
What does message error C4EBA7C9 mean? How can I correct this?
The message C4EBA7C9 apprears on the printer, what does thismean and how can I correct it?
Hello @tawee,
Welcome to the HP Support Forums!
I understand that you're getting the message C4EBA7C9 on your HP printer. I would like to work with you today with resolving this error code. However, in order for me to provide you with accurate troubleshooting steps I do need to know which HP Printer you have:
What's my Model Number?
In the meantime, this error does sound like a firmware failure on your printer. The firmware is the programming on your printer and tells the printer what to do and how to do it. If the programming is corrupt on your printer, the 'brains' of your printer are corrupt.
To ideally resolve this issue quickly for you can I please have you perform a power reset:
With your printer powered on, disconnect the power cable
Leave the power cable disconnected for 60 seconds
Plug your power cable back in directly to a wall outlet
The printer will power back on on its own
Once the printer turns back on, test the product to ensure functionality.
Please let me know if the power reset resolved your issue. Should you still be experiencing issues be sure to respond with your printer model number so I can offer additional product specific support. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
How can I correct the error 1004 ?
How can I correct error 1004?
Sometimes this works for that error 1004.
Go to Settings>Safari>Clear History, Cookies and Cache or Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
I am trying to update itunes and keep getting error code 2324 how can i correct this
I am trying to update itunes on my laptop and keep getting error message 2324. How can I correct this.
I have tried to reinstall but with no luckLet's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled -
I have just upgraded iTunes to version 11 and now cannot stream via my airport express to my hiFi. I get error 15000. how can this be corrected?
You've done great so far to upgrade to Leopard & install more RAM. Now install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
After you install the 10.5.8 update, click on the Apple in the menu & select Software Update. You will then be informed of some application updates. iTunes may be one of them. Then click to install the app updates.
Cheers, Tom -
My query is missing the alter number and default... How can I corrected.
USER_A
create table TBL_A ( FIELD_A1 number not null,
FIELD_A2 varchar2(50),
FIELD_A3 date,
FIELD_A4 number(5,2) default 0,
FIELD_A5 varchar2(10) not null
USER_B
create table TBL_A ( FIELD_A1 number not null,
FIELD_A2 varchar2(20),
FIELD_A4 number(5,2) not null,
FIELD_A5 varchar2(10),
FIELD_A6 number(2) not null
I see the result like below after running below query only error is second line and rest is correct so how can I correct second line? :
alter table TBL_A modify FIELD_A5 VARCHAR2 (10) not null
alter table TBL_A modify FIELD_A4 NUMBER 5, 2) null // want to see only this one like alter table TBL_A modify FIELD_A4 NUMBER (5,2) default 0, rest is correct!
alter table TBL_A modify FIELD_A2 VARCHAR2 (50) null
alter table TBL_A drop FIELD_A6
alter table TBL_A add FIELD_A3 DATE
MYQUERY:
with src as
select src.table_name src_table_name, src.column_name src_col_name, src.data_type src_data_type, src.data_length src_data_len, src.data_precision src_data_precision, src.data_scale src_data_scale,
src.nullable src_nullable,decode(T.Constraint_Type,'P', 'Primary Key','U','Unique','') as src_cons
from all_tab_columns src
left join (select Cc.Column_Name,Uc.Constraint_Type
from user_cons_columns cc, user_constraints uc
where Cc.Constraint_Name = Uc.Constraint_Name
and Cc.Table_Name = Uc.Table_Name) t
on T.Column_Name = Src.Column_Name
where table_name = 'TBL_A' and owner='USER_A'
tgt as
select tgt.table_name tgt_table_name, tgt.column_name tgt_col_name, tgt.data_type tgt_data_type, tgt.data_length tgt_data_len,
tgt.data_precision tgt_data_precision, tgt.data_scale tgt_data_scale, tgt.nullable tgt_nullable,
decode(T.Constraint_Type,'P', 'Primary Key','U','Unique','') as tgt_cons
from all_tab_columns tgt
left join (select Cc.Column_Name,Uc.Constraint_Type
from user_cons_columns cc, user_constraints uc
where Cc.Constraint_Name = Uc.Constraint_Name
and Cc.Table_Name = Uc.Table_Name) t
on T.Column_Name = tgt.Column_Name
where table_name = 'TBL_A' and owner='USER_B'
col_details as
select src.src_table_name, nvl(tgt.tgt_table_name, first_value(tgt_table_name) over(order by tgt_table_name nulls last)) tgt_table_name,
src.src_col_name, src.src_data_type, src.src_data_len, src.src_data_precision, src.src_data_scale, src.src_nullable,src_cons,
tgt.tgt_col_name, tgt.tgt_data_type, tgt.tgt_data_len, tgt.tgt_data_precision, tgt.tgt_data_scale, tgt.tgt_nullable,tgt_cons
from src
full outer join tgt
on (
src.src_col_name = tgt.tgt_col_name
select *
from (
select case
when tgt_data_type != src_data_type or tgt_data_len != src_data_len or tgt_data_precision != src_data_precision or tgt_data_scale != src_data_scale or tgt_nullable != src_nullable
then 'alter table ' || tgt_table_name || ' modify ' || tgt_col_name || ' ' || src_data_type || ' ' ||
case when src_data_type in ('DATE') then null
else
case
when src_data_type in ('VARCHAR', 'VARCHAR2')
then ' (' ||nvl(to_char(src_data_len), ' ') || ') '
else decode(nvl(src_data_precision, -1), -1, null, nvl(to_char(src_data_precision), ' ') || ', ' || nvl(to_char(src_data_scale), ' ') || ')')
end
end
||
case when src_nullable = 'Y' then ' null '
else ' not null ' end
|| tgt_cons
when tgt_col_name is null
then 'alter table ' || tgt_table_name || ' add ' || src_col_name || ' ' || ' ' || ' ' || src_data_type || ' ' ||
case when src_data_type in ('DATE') then null
else
case
when src_data_type in ('VARCHAR', 'VARCHAR2')
then '('|| nvl(to_char(src_data_len), ' ') || ') '
else decode(nvl(src_data_precision, -1), -1, null, nvl(to_char(src_data_precision), ' ') || ', ' || nvl(to_char(src_data_scale), ' ') || ')')
end
end
|| tgt_cons
when src_col_name is null
then 'alter table '|| tgt_table_name ||' drop '||tgt_col_name
end alter_statement
from col_details
where alter_statement is not null;Stop reinventing the wheel. Oracle provides DBMS_METADATA_DIFF package:
SQL> desc u1.tbl_a
Name Null? Type
FIELD_A1 NOT NULL NUMBER
FIELD_A2 VARCHAR2(20)
FIELD_A4 NOT NULL NUMBER(5,2)
FIELD_A5 VARCHAR2(10)
FIELD_A6 NOT NULL NUMBER(2)
SQL> desc u2.tbl_a
Name Null? Type
FIELD_A1 NOT NULL NUMBER
FIELD_A2 VARCHAR2(50)
FIELD_A3 DATE
FIELD_A4 NUMBER(5,2)
FIELD_A5 NOT NULL VARCHAR2(10)
SQL> select dbms_metadata_diff.compare_alter('TABLE','TBL_A','TBL_A','U1','U2') from dual
2 /
DBMS_METADATA_DIFF.COMPARE_ALTER('TABLE','TBL_A','TBL_A','U1','U2')
ALTER TABLE "U1"."TBL_A" ADD ("FIELD_A3" DATE)
ALTER TABLE "U1"."TBL_A" DROP ("FIELD_A6")
ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A2" VARCHAR2(50))
ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A4" NUMBER(5,2) DEFAULT 0)
ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A4" NULL)
ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A5" NOT NULL ENABLE)
SQL>
SY. -
IPhone software update errored. How can I fix my iPhone without having to do a restore?
I plugged in my iPhone 4 to do a sync this afternoon. I got the message that there was a software update. Sadly, I've updated to the crappy iOS7, so I chose to install the update (which I think is 7.0.2.) The update was downloaded, and was loading to my iPhone. I suddenly received an error that my iPhone couldn't update. I think it had an error code of 411. My iTunes refreshed, and is now not showing that it recognized my phone. Now the only thing I can get to show up on my screen is a graphic of the iTunes icon, and an arrow directing me to plug in my phone. When I do this, a message appears that iTunes has detected an iPhone in recovery mode and that I must restore this phone before it can be used with iTunes. I don't want to perform a restore. I will lose all my data. So, why did this error? How can I fix my iPhone without doing a restore?
I think it had an error code of 411....So, why did this error?
There is no such error code. No one can tell you why without the correct code.
Was this phone EVER jailbroken?
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iTunes has detected an iPhone in recovery mode and that I must restore this phone before it can be used with iTunes....How can I fix my iPhone without doing a restore?
There is no way to get out of recovery mode without restoring.
You mean you actually didn't back up before updating, really?
Message was edited by: modular747 -
1 declare
2 ftype sys.utl_file.file_type;
3 ftxt varchar2(100);
4 begin
5 ftype:= utl_file.fopen('c:\','test.txt','w');
6 ftxt:='xxxxxxxxxxxxxxxxxx';
7 utl_file.put_line(ftype,ftxt);
8 utl_file.fclose(ftype);
9* end;
SQL> /
declare
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "SYS.UTL_FILE", line 98
ORA-06512: at "SYS.UTL_FILE", line 157
ORA-06512: at line 5314214
Why are you posting this question several times? You got a perfectly good answer from V Garcia in how can I correct it?. You are cluttering up the forum and wasting my time.
Please learn to use this forum properly.
Regards, APC
Maybe you are looking for
-
I need the Adobe Flash Player version 11.1.102.64plug in on my MacAir to view Ustream videos. Adobe message says the version is for Intel-based Macs with Safari; also says that I "may have to temporarily disable antivirus software. is it safe to down
-
IPad Notes Syncing with iCloud
I'm trying to sync notes between my iPhone 4 and my iPad 2. I have iCloud set as the default account in the notes settings on the iPhone but there is no option to make iCloud the default account on the iPad. It just says "on my iPad". How can i g
-
Unable to sync ipad to itunes on desktop due to being unable to download version 11.1
My iPad2 is updated with iOS 7.0.4. Whether I manually connect the iPad to the desktop or try it wirelessly, I get a message stating that I must have iTunes 11.1 or higher to update. When I click check for updates, iTunes says I am not connected to
-
Hi, I'm fetching supplier, Item, qty information from different tables. Q1: Supplier Name, Quantity are the columns in my select clause, for only one particular item (hard coded). But I want a single query which fulfills my below 2 requirements: 1. c
-
Hi All, I need some help to interpret the below job log. A considerable amount of time i.e. 4 hours is being spent in calling the customer enhancement EXIT_SAPLRSAP_001. Previously this activity didnot consume such huge time. We tried checking the T