HT1689 I pod goes blank while using it

I pod goes blank when using it especially while playing a game

What do you mean by it goes blank? Does the App go to a black screen and then close? If so, see all of the suggestions in this article.
iOS: Troubleshooting applications purchased from the App Store
Otherwise, post back with more information regarding what the issue is you are experiencing.
B-rock

Similar Messages

Screen goes blank while using phone

If this happens with your 3G, I bet it's because it's in a case you purchased for the old model. Take it out of the case and see if it works.

Do you use a case or sleeve on your iPhone? If the case blocks the proximity sensor(s), the phone may still think you are holding it next to your face and black out the display so you don't disconnect or do something else unintended "by cheek."
I had this problem too and fixed it by modifying the el cheapo holster case with a razor blade - works fine now. Depending on which iPhone model you have, there will be one or two proximity sensors to the left or right of the earpiece speaker at the top of the phone. Make sure this area is clear, and you should be fine. This also fixes any problems people are having with random screen bright/dark changes since the light sensor is located in the same area.

Screen goes blank when using Patch tool

The only information I've been able to find on this issue thus far was a post that was written during the Photoshop CS6 beta period at http://forums.adobe.com/message/4285375
I am using the final released Photoshop CS6 software, not beta, and am having the same issue with the Patch tool. I start to drag around an area to make a selecton, and the screen goes blank so that I can't see where I'm making the selection. When I release the mouse, the image appears again. Another problem which may be related is that sometimes when I zoom in, the screen goes blank. Closing Photoshop and re-launching it usually fixes the problem, but is an annoying time-waster. I have the most current update from the Cloud for Photoshop CS6, 13.1.2.X64.
Does anyone know a fix for this?

RAM is 12 GB. I'm not sure which numbers are relevant for VRAM and scratch drive, but this is what I found for video card properties:
Total Available Graphics Memory: 2809 MB
Dedicated Video memory: 1024 MB
System Video Memory: 0 MB
Shard System Memory: 1785 MB

IPhone 4s going Haywire while using Car Chargers..

My iPhones 4s is going crazy while Charging in the car(via usb or AC). The touchscreen is unreponsive and it goes haywire when it responds.
Apple Store replaced my phone but the new one is also doing the same. I had my wife try hers and it also gets wacked out..
I have been a long time apple fan but i have been very dissapointed with all the problems my 1st iPhone has been giving us.
Anyone else having this problem?

Have you or anyone found a solution to the iphone 4S repeated burn out of car chargers? I have Audi A6 2010, with three outlets. Also have 3 different iphone approved chargers (Belkin, Griffin and Amazon) that all will not work (light doesn't go on to show there is a connection) and my iphones show no charge. At the beginning iphone said it did not support this charger, but after adjusting the tightness of the connection, it started charging. However, short term only, now doesn't work All chargers have burned out. Is there a specific brand for iPhone 4S that will not burnout and continue to work?

Samsung 205BW goes blank when using DVI

Hi
I have a G4 Mac Mini. I recently purchased a [url="http://komplett.ie/k/ki.asp?sku=322266"]Samsung 205BW 20in widescreen LCD monitor[/url].
I connected it via the DVI port on my mini with the DVI cable that came with the monitor and it seemed to work great but occasionally the screen will flick black as if there was nothing connected to it. It happens most noticeably when I go from a fullscreen quicktime video to the desktop or if I activate Expose. Also if the Mini goes to sleep and I try to wake it the screen stays black and I either have to reboot or change to using the VGA cable.
The monitor works perfectly if I use a DVI-VGA adaptor and connect to the VGA port on the monitor but I'd prefer to use DVI.....
I read on here of people using SwitchResX to change the settings for the monitor. I downloaded it but I don't really know what to input in the custom settings... perhaps someone here can help?
Here is the DDC file from SwitchResX:
=========================================================
DDC block report generated by SwitchResX for display
SyncMaster
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 4C 2D 1E 02 30 32 41 48
1 | 03 11 01 03 80 2B 1B 78 2A EE 95 A3 54 4C 99 26
2 | 0F 50 54 BF EF 80 B3 00 81 80 81 40 71 4F 01 01
3 | 01 01 01 01 01 01 21 39 90 30 62 1A 27 40 68 B0
4 | 36 00 B1 0F 11 00 00 1C 00 00 00 FD 00 38 4B 1E
5 | 51 10 00 0A 20 20 20 20 20 20 00 00 00 FC 00 53
6 | 79 6E 63 4D 61 73 74 65 72 0A 20 20 00 00 00 FF
7 | 00 48 53 47 50 31 31 34 30 33 30 0A 20 20 00 6B
Valid DDC block: checksum passed
EDID Version........1.3
Manufacturer........SAM
Product Code........7682 (1E02) (021E)
Serial Number.......1212232240
Manufactured........Week 3 of year 2007
Max H Size..........43 cm
Max V Size..........27 cm
Gamma...............2.20
DPMS Supported Features:
Active off
Display type:
RGB color display
Input signal & sync:
Digital
Color info:
Red x = 0.640 Green x = 0.300 Blue x = 0.150 White x = 0.313
Red y = 0.330 Green y = 0.600 Blue y = 0.060 White y = 0.329
Established Timings:
800 x 600 @ 60Hz
800 x 600 @ 56Hz
640 x 480 @ 75Hz
640 x 480 @ 72Hz
640 x 480 @ 67Hz
640 x 480 @ 60Hz
720 x 400 @ 70Hz
1280 x 1024 @ 75Hz
1024 x 768 @ 75Hz
1024 x 768 @ 70Hz
1024 x 768 @ 60Hz
832 x 624 @ 75Hz
800 x 600 @ 75Hz
800 x 600 @ 72Hz
Manufacturer Reserved Timings:
1152 x 870 @ 75Hz
Standard Timing Identification:
#0: 1680 x 1050 @ 60Hz (B300)
#1: 1280 x 1024 @ 60Hz (8180)
#2: 1280 x 960 @ 60Hz (8140)
#3: 1152 x 864 @ 75Hz (714F)
Monitor Description blocks:
Descriptor #0 is Timing definition:
Mode = 1680 x 1050 @ 60Hz
Pixel Clock.............146.25 MHz Non-Interlaced
Horizontal Vertical
Active..................1680 pixels 1050 lines
Front Porch............. 104 pixels 3 lines
Sync Width.............. 176 pixels 6 lines
Back Porch.............. 280 pixels 30 lines
Blanking................ 560 pixels 39 lines
Total...................2240 pixels 1089 lines
Scan Rate............... 65.29 kHz 59.95 Hz
Image Size.............. 433 mm 271 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Negative vertical polarity
* Positive horizontal polarity
Descriptor #1 is Monitor limits:
Horizontal frequency range.......30-81 kHz
Vertical frequency range.........56-75 Hz
Maximum bandwidth unspecified
Descriptor #2 is Monitor name:
SyncMaster
Descriptor #3 is Serial number:
HSGP114030
=========================================================
thanks for any help!!
Mac Mini G4 Mac OS X (10.4.9)
Mac Mini G4 Mac OS X (10.4.9)

I had the exact problem you report with my core duo Mac Mini connected to a Syncmaster 204B. This problem persisted when I returned the monitor several times to Samsung for replacement 204B's. They eventually upgraded me to a refurbished 204T and the problem disappeared.
It seems to me that Samsung has some real problems with screen blanking when their monitors are hooked by DVI to certain Macintoshes. For anyone contemplating a Samsung monitor, I'd recommend another brand until it's known that this screen blanking problem has been resolved with all Samsung models.
Mac Mini Core Duo Mac OS X (10.4.9) 1 GB RAM

Screen goes blank while running Snow Leopard

I installed Snow Leopard Yesturday and everything went fine, but today my MacBook Pro 13" (latest Model) screen has gone blank 3 times when working on it for no reason everything is still running just cannot see it. If I close the lid and get it to enter sleep mode then open it again the screen comes back on.
Has anyone else had this issue?

I'm another one with the problem.
My iMac seems to be waking up from sleep on its own as when I come back to use it, the fan is working, the screen is blank, and I can't do anything except shut down (by holding power button). Always happens when I'm away, so don't know when (or why) it is waking up. (I have Wake for network access unchecked under Energy Saver, to no avail.)
Upon starting back up, screen brightness is set to lowest setting, and I get the error message for inappropriate shut down (of course). Very frustrating as I don't want to corrupt anything by constantly having to force shut down. I had no problems before SL.
I too will try Expose. Hopefully Apple is listening!

Macbook air 13" screen goes black while using iTunes

I have an early 2014 13" Macbook Air with a 1.4 GHz Intel Core i5 processor, and I'm using OS X Yosemite 10.10.1. When I'm using iTunes, specifically when I'm watching a movie or TV show, the screen will randomly go black, but not like it turned off. The audio still works, but I can't see the cursor or anything. The only way I've been able to fix it is to completely turn it off (control+command+power) and turn it back on. It happens pretty often though, and as you can imagine, gets quite annoying. Is there any way to fix this? Thanks in advance.

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best.

JSF page goes blank when using with servlet filters...

Hi there,
I have a JSF page, which shows up fine (in both IE and Firefox) in normal scenarios.
But as soon as I apply servlet filters onto the faces extension, I get into trouble. So after setting up the filters, when I load the same page(s) in each of the browsers, the filters run fine in the background, but the page comes up blank (in both IE and FF).
Happening only with JSF / Faces pages.
Once I removed the filter mapping, the page loads up just fine.
Would appreciate any feedback on this. TIA!

More info on the original post...
Platforms:
Tomcat 5.5.15
JSF/Faces - Sun RI 1.2
Servlet Spec: 2.4
Portion of the Web.xml code (after applying the filters onto the faces components):
   <listener>
      <listener-class>
         com.sun.faces.config.ConfigureListener
      </listener-class>
   </listener>
   <servlet>
      <servlet-name>Faces Servlet</servlet-name>
      <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
      <load-on-startup>1</load-on-startup>
   </servlet>
   <servlet-mapping>
      <servlet-name>Faces Servlet</servlet-name>
      <url-pattern>*.faces</url-pattern>
   </servlet-mapping>
   <filter>
      <filter-name>PreProcessFilter</filter-name>
      <filter-class>.....view.util.PreProcessFilter</filter-class>
   </filter>
   <filter-mapping>
      <filter-name>PreProcessFilter</filter-name>
      <url-pattern>*.html</url-pattern>
   </filter-mapping>
   <filter-mapping>
      <filter-name>PreProcessFilter</filter-name>
      <url-pattern>*.jsp</url-pattern>
   </filter-mapping>
   <filter-mapping>
      <filter-name>PreProcessFilter</filter-name>
      <url-pattern>*.faces</url-pattern>
   </filter-mapping> Thanks for your time!

The screen goes gray while using the iPod

after, the ipod turns off and apple logo automatically appears as if it were turned off and then turn on

Did you try to set it up again as new device without using the latest backup? How to back up your data and set up as a new device

My iMac goes blank and requires rebooting while surfing the web and ads change

I have a Early 2008 iMac refurb that occasionally locks up and the display goes blank while online and you have to reboot. Any clues?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

HT1414 screen goes blank when pluged in battery ok after a minitue

screen goes blank during uses when pluged in for a minitue is ok

Most iPhones have the Setting Auto-Lock set to 1 minute. So at, 1 minute the screen automatically turns OFF, turns black, blank. You can set this to other time lengths or Never. Tap Settings App > General > Auto-Lock.

IMac goes to blank white screen while using have to unplug

For the second time now my iMac 2.8 ghz Core 2 Duo has gone to a blank white screen right in the middle of doing work. The machine sounds the same but the only way to get it back is to unplug it. I've searched around and found booting issues but that is not my problem. It just goes blank white right in the middle of using it.

Josh Mellicker wrote:
Does the white screen have a series of small multicolored color "chips" on it? And is there a band at the bottom that is half "noise"?
michaelfromutah wrote:
...I inserted my reinstall disk and double clicked the restore icon...
What "restore icon"?
If you have the Mac OS X install disc in the drive, switch on your Mac, and hold the Option (⌥) key.
You will see a grey screen, with Macintosh HD & after a few seconds, a CD with Mac OS X Install DVD.
Click on the DVD and then the arrow underneath it. This will start up the Mac OS X installer.
From here, you need to choose your language and then from the Utilities menu, choose Disk Utility.
Then choose Macintosh HD from the left, and choose "Verify Disk" not permissions
Let us know how you go.

IPad goes crazy when using it while charging

Hi, these couple of days my new iPad started to act weird whenever I'm using it while the charging port is intact with my new iPad. Which means that it is not responding to my touches when the charge port is intact and reacts normally when I pull out the charge port. This is the first time it is happening after using it for a couple of months. The weird reactions are such that i can't type or touch at the correct location as it goes else where. It changes my pages, goes blank enlarge my page and becomes jumpy. It's getting annoying as it is not functioning the way it Shd be whenever the charge port is intact. It goes back to normal when I unplug it. I have actually taken a video on this issue and i can send the video to you via youtube if you require. Please advise. Thanks

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
If the reset does not help, then transfer all purchases to iTunes on your computer, next backup the iPad to your computer and then restore the iPad with the backup.

IPad goes completely black while using it, comes back in a few seconds

iPad goes completely black while using it, comes back in a few seconds battery doesn't hold charge either

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe

I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.

I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.

Drag applications from your main desktop off the right side of the screen and they will appear on the TV. This is the extended desktop mode.
Regards,
Captfred

HT1689 I pod goes blank while using it

Similar Messages

Maybe you are looking for