HT1689 Is it possible to view my audio tracks stored on my iPhone in anything other than list view when it is plugged into iTunes via my mac?

Hi,
When my iphone is plugged into my mac I can only view the songs on it in a list. I sync my music manually so I can add or delete a song with ease. I can view the songs on the mac in list, cover flow etc but when I look on the iphone within itunes, these options are all greyed out and I can only see the songs in a list. I have nearly 500 songs on it at the moment and it is hard to easily see which albums are on the iphone. Any help gratefully received!

Unfortunately, you cannot change the view of your audio tracks.

Similar Messages

How to get iTunes to show views other than list--no grid or cover flows

I posted earlier but no one offered any suggestions. I'll try very directly this time. With iTunes 8.1 installed, I can obtain no other view than LIST. I can't get GRID or COVER FLOW. Any suggestions from Mac gurus far smarter about these things than me?

Apparently, the only problem is in the view options. I don't routinely purchase music, I merely copy my own or friends' CDs into iTune. So, I can't verify there is any problem area there. But, the ability to view in anything other than list is driving me crazy. I grew accustomed to that cover flow view before this latest update, so I miss its availability. My concern is that this must be the indication of a deeper problem with iTunes or my video drivers or other related problems I've had over the last two months with the iPhoto, documented elsewhere in these discussion forums.

Is it possible to retain multiple audio tracks when exporting?

While ripping my DVD collection, I've wanted to add a purchased RiffTrax (see www.riftrax.com) to the movie as another audio track. I've been successful, but it took the following steps:
1. Encode the movie using Handbrake, open the resulting m4v file in Quicktime Pro
2. Also in Quicktime Pro, open the Rifftrax aac file I created and add it as another audio track in the m4v
3. Save the m4v as a Quicktime mov file
4. Use Handbrake again to encode the mov file into an m4v file, including my added audio track
The reason I have to do step 4 is because if I were to export an m4v file directly from Quicktime Pro, it would compress all of the audio tracks into a single audio track. It would save a lot of time if Quicktime could export multiple audio tracks, at least when exporting to formats that can handle them. Does anyone know if this is possible?
BTW, if anyone wants more details into how I create the RiffTrax aac, just ask.
- Jake

I've answered my own question, it was a lot easier than I thought. After the first encoding by Handbrake, there's really no difference between calling it a mov file or m4v file. I can change the file extension at will and there's no need to do an export that mashes the audio tracks. It's only AppleTV that needs to see the m4v file extension, Quicktime and iTunes doesn't seem to care one way or the other.
Thanks for letting me think out loud.
Jake

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

As Tom said the FCS forum is the better place to post the question.
Here is Apple's best practices doc for installing both on the same system.
BTW, FCP7 is part of the FCS 3 suite of apps.
Russ

This am I turned on my 4s and went to play some music and it was all gone, plugged into itunes and synced, now they are back, but other than 1 audio book they wont play

this am I turned on my 4s and went to play some music and it was all gone, plugged into itunes and synced, now they are back, but other than 1 audio book they wont play

they show up in my music, but they are like grayed out and when u click on them nothing happens, i can go to itunes on my mac and click on them and they play. should I install 6.0 or wait till i have this resolved

Is it possible to lock an audio track in "record enabled" mode?

Here's how i write... i set up a drum loop to play for around 20 minutes, then I rec-enable one audio track to record vocals, and then finally, I skip around among hundreds of different midi tracks.
I just hit the down arrow button, and scroll through dozens and dozens of midi tracks. I quickly hit the keyboard to listen to the sounds. If i like a particular sound, i just want to hit record, and instantly record my vocals along with the midi performance.
Unfortunately, when i hit record, the vocal/audio track doesn't record. Right at the moment when i find an inspiring sound and hit record, the vocals just don't record.
I'm forced to scroll miles up the arrange window, to find
the vocal audio track. It's still blinking the red "rec" button, but this is misleading. It's not actually record enabled. I have to hold down shift, hit it once to turn it off, then hit it again to re-activate record function.
Only then can i record the midi AND vocals.
What I want and need is sooooooo simple to offer as a function, yet totally ruinous to my creative flow if it's not possible. (I used to do this easily on the far inferior
Cubase VST 5.1, OS 9)
Is there a way to record enable an audio track, so that,
until I specifically disable the record function, it's
ALWAYS ready to record the second I hit the record button?
Even after I've been hitting the down arrow to audition
various midi channels?
MacPro 3ghz, 8 gig RAM, 3 raptor drives Mac OS X (10.4.10) Logic 7.2.3, Kontakt 2 soft-sampler, RME 400

I tried to build screensets like you suggested. If I could
get this to work, I think it would be a great solution, but
I'm having serious problems.
I opened a separate mixer, with just the single vocal/audio
track showing.
Then I opened the main mixer, which has all the faders.
If I record-enable a midi track, and then hit the record-enable button on the audio track, the midi track becomes un-enabled. Incredibly frustrating.
The only way I've been able to do it has been to record-enable the vocal track, and then start recording.
Only if Logic is actually recording, can i then record-enable the midi track without deactivating the audio
track.
A big problem is, that when i click to record enable the
vocal track, the arrange window jumps all the way up to the
top, where the audio track is. THen i'm forced to travel
down, to re-find the midi track.
You mentioned in your post that the mixer needs to be
"unlinked". HOw is this done? Will it be possible for
me to click on the record-enable button on the mixer's audio track without the arrange window jumping to that track?

Using voice-over function I see the result on the specific audio track but I don't hear anything. What to do?.

Making a film in imovie I never had problems with voice-over. However in my current project I experienced problems at the end. Using the voice-over function I see the result - audio waves at the voice-over track - but I don't hear any sound of this track if I review or play this part of the project. Somebody an idea what I did wrong? Thanks for any suggestion.

Not sure why, but sometimes a project will just cease playback of Voiceovers added to it. I've seen this before, but never had it persist into a new project. As with any issues that are specific to a single project, it's usually best to start over, as one problem is quite possibly indicative of further issues down the line with that same project.
As a workaround (if you REALLY want to avoid recreating the project) would be to copy the voiceover files from within the iMovie Project file (browse to your Movies/iMovie Projects/ folder and right-click or CTRL+Click on the name of the project, then click "Show Package Contents") for that project out to your Desktop (or any other accessible location), then drag them back in to add them as a regular audio track. I've used this trick successfully, but it's not 100% (going back to the 'one problem means more later' thing).

Why is the audio on my video getting out of sync when it is imported into itunes?

Hello,
I have videos in the MP4 Format, and have imported them into itunes. However, during playback in itunes, the audio gets more and more out of sync as the video plays. By the end of the film the audio can be 5-6 seconds out!
What's strange is that the source file, played with quicktime or Windows media player, is fine and works perfectly.
Why is the audio stretched once it is imported?
Thanks,
James

I have the same problem.
Motherboard: Gigabyte GA-MA785GPMT-UD2H
Chipset:
North Bridge: AMD 785G
South Bridge: AMD SB710
Video: Integrated ATI Radeon HD 4200
HDMI Audio through the HDMI port out to the TV.
Tried on Windows 7 Pro 32bit and Windows 8.1 Pro 64bit.
Tried with the integrated ALC889A audio device enabled and disabled (It seems that the video card drives the HDMI audio device though, because it still appears in Windows even if I disable the Audio device in BIOS).
Latest iTunes and drivers installed.
I have already tried all sugestions about matching Windows Audio settings to iTunes settings (bit depth, frequency rate).
Apple, any suggestions? I'm not having a great customer experience after buying a pair of HD movies in iTunes.

No audio when importing mp4 files into iTunes.

Since recently, whenever I import an MP4 of M4V file into iTunes, it either deletes the audio, or the video becomes shocky.
When I play the same files in VLC they do work. That is great and all, but since I use Apple TV I need them to work in iTunes.
I've tried to delete and re-import the files. I've also tried to download different versions of the same files, which also didn't work.
To me it seems like the problem lies within iTunes.. but I'm not really a computer wiz.
Anyone else have this problem and know how to fix this?
Thanks in advance.

Does your friend have EXACTLY the same computer software and hardware?
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Any way to view iTunes media on anything other than Quicktime?

I agree... Quicktime + Vista = nightmare. Anyway to play proprietary iTunes media on something other than Quicktime?
AMD Athlon 64 X2 3800+ w/ 2Gigs RAM Windows Vista 80 Gig Video iPod

That was made possible long ago.
(85671)

Is it possible to keep one audio track and lay more video on top?

Hi...I want to take audio that is on one video clip and lay different video over the top of it. Is it possible in iMovie08?
Thanks!

I want to take audio that is on one video clip and lay different video over the top of it. Is it possible in iMovie08?
No, but you could Command-Shift-Drag the clip with the audio you want from an event and "pin" it to the video you want in a project. Basically, you are extracting the audio from the event clip and associating it with the video you want in a project. Once it is associated with the clip, the audio can then be manipulated (set in/out points and aligned with the video) as you would any other added audio.

Although Video & Audio tracks the same length, Video slowly drifts faster than audio, progressively

What's Up With That? I have other projects from same source that don't behave like this.
Source video is from Livestream HD-500 Recording of an Awards Show last weekend.
Type: AVI Movie
File Size: 107.9 GB
Image Size: 1920 x 1080
Frame Rate: 30.00
Source Audio Format: 48000 Hz - 16 bit - Mono
Project Audio Format: 48000 Hz - 32 bit floating point - Mono
Total Duration: 02:29:40:22
Pixel Aspect Ratio: 1.0

I'd wager that either the clip's frame rate is variable, which spells trouble, or you need to use Interpret Footage to tweak the frame rate, possibly to 29.97.
To check whether the frame rate is constant or variable, drop the clip into MediaInfo and in the Tree view look under Video. I think the operative property is called Frame Rate Type.
Do you see this problem in Source Monitor or only in the Program Monitor?

Are there step by step instructions to import Audio Book cds into iTunes 12 on Mac?

In iTunes 11, I could see the Audio book CD come up in the left hand column ABOVE my Playlists. I would simply create a new playlist, then click the CD icon, which would open, showing all the tracks in the right hand window. I could simply select all those tracks and then drag them to the left into the waiting Playlist, and it would burn. What is the process now? Thank you!

Ripped, yes, thank you. My window does not look the same: at the top, I can click Playlists and those show. The CD I've got in my drive used to show above that, including the title. Now I can click the CD icon to the left of the My Music, Playlists, Radio & iTunes store and then the window no longer shows the playlists, just the CD's track names and numbers. Can I have both windows open at once so I can drag to the playlists to rip?

How can I view a video camera plugged into the TV tuner card's S-Video socket

HP Pavillion Elite HPE Series desktop. TV tuner card AVerMedia H752. Video camera connected to S-Video socket. Win7 64 bit OS. How can I view the camera output? Windows Media Center does not seem to provide a means.

Hi,
Sorry, I don't know what are you trying to do. The Tuner card is like a TV which allow you watching TV like normal TV on your computer. The S-Video is OUT only, plugging a video camera to it won't do anything good.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT1689 Is it possible to view my audio tracks stored on my iPhone in anything other than list view when it is plugged into iTunes via my mac?

Similar Messages

Maybe you are looking for