HT1692 Having trouble getting new contacts input.

How do I get info into the contacts to stay?

If you're using the iPhone as recommended, your contacts are stored in a contact manager application on your computer, such as Outlook or Address Book. Your contacts reside safely there, and will synch back to your phone.
If you didn't do that, your only hope is to restore your new phone from your old phone's backup to get those contacts back.

Similar Messages

I have an older IPOD that I'm having trouble getting new purchases on to my IPOD. I use to have a source list on the left hand side of screen where I dragged my purchases to and they downloaded. Can't find place to check manual vs. auto sync.

I have an older IPOD classic that I'm having trouble getting new purchases from library to IPOD. I use to have a IPOD icon in the source list on the left side of the screen. Now that is all gone. My purchases are coming up as recently purchased but can't figure out how to get them transferred to IPOD. I also can't find how to confirm setting is for manual not auto sync as the first computer I had blew up and am now using a different one. I haven't had any of these problems prior to the updates.

G'day Mate,
As an avid flight simmer I bought a new soundcard my previous was
an audigy 2 platinum ex with an external module I really liked but somehow all of a sudden I was getting a screech when using FS9 sor I opted to change to the present. Well stone the crows my soundcard was auto updated with new drivers and well you guessed it the soundcard did not show in the sound video controllers window No I have just joined this forum and it looks like3 you may have the answer for me . I am now going to do as you suggest and see what happens.
I shall return with the outcome of my dilemma.
Many thanks for your sound advice ( pardon the pun)
Pat
Ret'd Viet Vet

Anyone else having trouble getting new version of Flash to work w. Safari?

I read on the TUAW.com site this AM that Adobe released a new version of Flash Player (8.0.24) that closes a security hole. Keeping a security hole around doesn't sound like a great idea so I went to update.
Well after updating Flash Player on my MBP I get a missing plugin warning with Safari. The new version works find on Safari on my old PB and also with FireFox on my MBP. So seems this is either a problem with the Universal Binary version of Safari or it's just a funky issue with my MBP.
Anyone else having this problem?

There's a note at the bottom (in the RSS feed at least) that this update isn't for Intel Mac's. Not sure where that leaves us in terms of the security hole tho! If you need to restore the Intel Flash plugin, search this forum and there are a few threads with solutions.. Cheers,

Having trouble saving new contacts...Doesn't do anything when I press done

I am trying to add an email address of a friend...go thru the steps, allows me to add, but when I press done, nothing happens. In fact I have to go out to main screen to do anything else

Here:
iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows

"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."

Hi,
One of my user was unable to receive email from her desktop outlook, browser and her phone. On her outlook, the status of her exchange is disconnected. Then when she tried to access her OWA, this error prompted below "
"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."
Her emails started coming in again after about 45minutes later. It happened twice today.
Anyone have the same symptoms as mind?

Hi,
When user is disconnected to Exchange, please test outlook anywhere connectivity for this user.
Test Outlook Anywhere connectivity
https://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspx
Please also check if there are any other events in application log.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Having trouble getting started with my new shuffle

I am having trouble getting started with my new shuffle. any help?

Hey there Feisty59,
It sounds like you have a new iPod Shuffle, and want to know how to start using it. Here is a great resource for understanding how to use your iPod, and how to set it up and get music synced to it from iTunes:
iPod shuffle User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1550/en_US/iPod_shuffle_4thgen_User _Guide.pdf
If you have a different model of iPod Shuffle, choose yours from the following page and use that guide instead:
Apple - Support - Manuals
http://support.apple.com/manuals/#ipodshuffle
Thank you for using Apple Support Communities.
All the very best,
Sterling

HT4623 i have downloaded and installed the new ios7 software on my iphone 4s but im having trouble getting through the activation process i keep getting the message "iphone could not be activated because the activation server cannot be reached"? help??

I have downloaded and installed the new ios7 software on my iphone 4s but im having trouble getting through the activation process i keep getting the message "iphone could not be activated because the activation server cannot be reached"? any suggestions?

The activation servers are probably overloaded with everyone trying to update to iOS 7 today. You might need to wait and try again later.

I am having trouble getting mail from the server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system. Any ideas?

I am having trouble getting mail from the shaw server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system and obtain new messages. Any ideas? Its at the point where I have started using the PC again as its less trouble.......

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
If you do not need to use a proxy to connect to internet then select No Proxy

On the new ios 7 i am having trouble getting notifications, if i get kik it dosent show me i get a notification unless i open the app, how do i fix it?

On the new ios 7 i am having trouble getting notifications, if i get kik it dosent show me i get a notification unless i open the app, how do i fix it?

Hi Baseballlifea5,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Check to see if the developer has an iOS 7 update for their app first.
The IPad Mini User Guide shows how to adjust the notifications setting for each app on page 29:
manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
Cheers,
- Judy

HT3819 I bought a new computer and am having trouble getting my iTunes library onto it. any helpful suggestions

I just bought a new computer and I am having trouble getting my iTunes library to transfer from the old computer to my new one. I turned the home sharing feature on but it still isn't working. Does anyone have any ideas or suggestions as to what I may be missing?

See this migrate iTunes library post.
tt2

New to CS6 Dreamweaver, creating a "Responsive Website" having trouble getting fluid divs to behave

Trying to create a "Responsive Website" and I'm having trouble getting my fluid divs that I create to "break" their link from the "Boilerplate" .
I'm using a "Fluid Grid layout Div" to create a section that has a transparent background of rgba(0,0,0,0.3) and that's perfect, then I add two more "Fluid Grid layout Div's" inside the transparent one to create a 2-column part in the section and that's where the trouble is.
None of the "formatting" I've set for the text in my ID's or Classes are being used - just reverts to what's in the "Boilerplate" i.e. "p,h2,h3" and I can't get it to "break" it's link the "Boilerplate" so I can apply my formatting.
I have been able to select my formatting at times but it is ignored and uses what's in the "Boilerplate".
Kept trying different ways to get it to work and now I've so many of both the ID's and Class's that their not all showing up as an option to be able select them.
I'm missing something basic and after two days it still escapes me.
Please somebody, tell me what I'm missing.
Frustrated

FluidGrid Layouts are not easy to learn. You need a good grasp of fundamental RWD concepts including CSS Media Queries. Keep your layout simple and be patient. The first time I used FGLayouts, I had to start over 9 times before I got acceptable results.
Responsive Web Design
http://coding.smashingmagazine.com/2011/01/12/guidelines-for-responsive-web-design/
Introduction to CSS Media Queries
http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
CS6 Fluid Grid layouts (17 min video)
http://tv.adobe.com/watch/learn-dreamweaver-cs6/using-fluid-grid-layouts/
Best advice for beginners:
Build Mobile Layout first. Everything else is based on this primary layout. Then build Tablet layout and finally Desktop. Don't worry about content. Just build the layout & save often during development.
DO NOT TAMPER with the boilerplate.css or FGLayout.css code. Even experts can break the layout in a hurry. Use a separate external style sheet for content and typography styles.
If you're using CS6 ver 12.0, you cannot nest divs inside other divs. Everything must be inside the .gridContainer like this:
<body>
    <div class="gridContainer">
          <div> </div>
          <div> </div>
          <div> </div>
    </div>
</body>
If you care to post a link to your online test page, we can take a look and possibly offer more suggestions.
Nancy O.

Having Troubles Gettin Lines Of Input!?!?!?!!?

I'm trying to build a command line application (named Assemble) which will read (from standard in) a tagged "discussion" stream and print a (somewhat) organized version of the tagged part of the discussion (to standard out).... but i'm having trouble getting multiple lines of input.. i tried a while statement that looked like this... while ( (input = in.readline()) != null ) and all i got was every other line of input to get displayed to the screen or to a file... how can i fix this??? i had the while statement above input = in.readLine();
     BufferedReader in = new BufferedReader (new InputStreamReader( System.in ));
     String input;
     input = in.readLine();
     System.out.println( input );

thanks.. i have the input coming in.. but how can i redirect input to output within the program.. i'm trying to move the input lines to either a file called head.txt, body.txt, or foot.txt... once the files are in there.. i want to read them out to the screen... how can i do this? at the moment..i'm moving them just to the screen..
import java.io.*;
import java.lang.*;
import java.util.*;
public class Assemble
public static void main(String args[]) throws IOException
if (args.length > 0)
System.out.println("");
System.out.println("");
System.out.println("");
System.out.println("Assemble.class is a small program that");
System.out.println("takes in as input a body of text and then");
System.out.println("outputs the text in an order according to");
System.out.println("the tags that are placed in the input.");
else
System.out.println("");
System.out.flush();
BufferedReader in = new BufferedReader (new InputStreamReader( System.in ));
String input;
while (true)
input = in.readLine();
if (input == null)
break;
else if ( (input.compareTo("<HEAD>")) == 0)
do
input = in.readLine();
if ( (input.compareTo("</HEAD>")) != 0)
System.out.println(input);
while ( (input.compareTo("</HEAD>")) != 0);
else if ( (input.compareTo("<BODY>")) == 0)
do
input = in.readLine();
if ( (input.compareTo("</BODY>")) != 0)
System.out.println(input);
while ( (input.compareTo("</BODY>")) != 0);
else if ( (input.compareTo("<FOOT>")) == 0)
do
input = in.readLine();
if ( (input.compareTo("</FOOT>")) != 0)
System.out.println(input);
while ( (input.compareTo("</FOOT>")) != 0);

I'm having trouble with my contacts. The contacts are listed but the phone numbers are no longer there. Can someone help?

Phone numbers are no longer visible in my contacts and I'm having trouble syncing my contacts from my outlook contacts. Any suggestions for how to restore contacts?

Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have been having trouble getting my email on my iPad. It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it. I can send emails, but can't get them

I have been having trouble getting my email on my iPad2.
It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
I can send emails, but can't get them.
Any ideas, people?

Hi Kharels
Just posted this reply to 2 others with same sort of question:
I have the same issue as i have my own email address and only want to use.
There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one. This is tedious though.
The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
Hope this work for you - let us know.
Simon

Having trouble getting my Lightroom 5.0 upgrade to accept my Lightroom 4.4 serial number.

I am having trouble getting my Lightroom 5.0 upgrade to accept my Lightroom 4.4 serial number. I recently installed Windows 8, 64 bit on a second solid state HD on my computer (had a virus problem for which I had to format C and reinstall everything). The new ss HD is drive C and my operating system and my programs are all installed there. All my documents and files are now stored on my original, reformatted drive, which is now drive D. I was using Windows 7, 64 bit. Could all this be the reason my serial number is not being recognized? PHH

Hi 48phh,
Yes Lightroom 5 takes the Serial Number of each previous version and you can do the Upgrade from any 1, 2 3, or 4 version of Lightroom,but somethig different for the Upgrade from the Mac App Store ... see how here: http://helpx.adobe.com/lightroom/kb/upgrade-mac-app-version-lightroom.html
you installed Windows 8 and installing only the operating system, but keeping all the app certainly and during the operation something can be lost, especially if you run Clean after installing the system by deleting the folder containing the old system, it's better to wait to do so.
However, no problem, because to do the 'Upgrade all you need is the old serial number and don't need Lightroom4 to be installed on your machine ...
more details here: http://blogs.adobe.com/lightroomjournal/2013/06/lightroom-5-hot-issues.html

HT1692 Having trouble getting new contacts input.

Similar Messages

Maybe you are looking for