HT1694 Unable to send email/ rejected by server

How do I fix this error on my iPhone?

Hi Rakesh,
You have to request you Network team to add the ip address of the machine where you have installed content server to your Exchange Server.
Let me know if it works.
Deepak

Similar Messages

  • Unable to send email from content server

    Hi,
    I have a requirement of sending the notification email to user from the stellent when he subscribe to it.To test it i logged in to content server as sysadmin.
    Administration->Actions->Send test email.
    I had filled some dummy data and when i click on send it gives me a error
    Content Server Request Failed
    Unable to send email. Could not send mail message from [email protected] with subject line: Test email from Content Server.
    intradoc.common.ServiceException: !csMailCouldNotSend,[email protected],Test email from Content Server
         at intradoc.server.InternetFunctions.sendMailToEx(Unknown Source)
         at intradoc.server.SystemAuditHandler.sendEmail(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at intradoc.common.IdcMethodHolder.invokeMethod(Unknown Source)
         at intradoc.common.ClassHelperUtils.executeMethodReportStatus(Unknown Source)
         at intradoc.server.ServiceHandler.executeAction(Unknown Source)
         at intradoc.server.Service.doCodeEx(Unknown Source)
         at intradoc.server.Service.doCode(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doAction(Unknown Source)
         at intradoc.server.Service.doAction(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doActions(Unknown Source)
         at intradoc.server.Service.doActions(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.executeActions(Unknown Source)
         at intradoc.server.Service.executeActions(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doRequest(Unknown Source)
         at intradoc.server.Service.doRequest(Unknown Source)
         at intradoc.server.ServiceManager.processCommand(Unknown Source)
         at intradoc.server.IdcServerThread.run(Unknown Source)
    Caused by: intradoc.common.ServiceException:
         at intradoc.common.SmtpClient.sendMail(Unknown Source)
         at intradoc.server.InternetFunctions.sendMail(Unknown Source)
         ... 21 more
    Caused by: java.lang.Exception: !csSMTPInvalidMessage,"System Administrator" <[email protected]>!csSMTPUnableToFindRecipients,1
         at intradoc.common.SmtpClient.writeMultiMsg(Unknown Source)
         ... 23 more
    Caused by: java.lang.Exception: !csSMTPResponseIndicatesFailure,550 5.7.1 Unable to relay for [email protected]
         at intradoc.common.SmtpClient.writeMsg(Unknown Source)
         ... 24 more
    I had set the internet configration in admin server to this values..
    HttpServerAddress=blrdxp-rchithul.corp.capgemini.com
    MailServer=BLREX002.corp.capgemini.com
    [email protected]
    SmtpPort=25
    HttpRelativeWebRoot=/idc/
    CgiFileName=idcplg
    UseSSL=No
    WebProxyAdminServer=true
    But i am still getting the error.kindly help me...
    Thanks in Advance
    Regards
    Rakesh

    Hi Rakesh,
    You have to request you Network team to add the ip address of the machine where you have installed content server to your Exchange Server.
    Let me know if it works.
    Deepak

  • Unable to send email from my server to internet mail address. Labview.

    I have had great success sending mail when I SMTP to the actual mail server that the email address is on. But when I try to send from my server to some other email address I get an unable to relay "email address" server response. If someone has any ideas on this I would appreciate it. I have included some information that may aid in this endeavor. (I do not want to use Active X thanks to Outlook's dislike of that)
    Example:
    [email protected] email to mail.bellsouth.net works fine. [email protected] email to mail.company.com works fine. [email protected] from mail.company.com gives unable to relay message. (Vice Versa)
    Exact server response from SendEmail_LV6.vi from developer zone: (
    ht
    tp://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3EB9956A4E034080020E74861&p_node=DZ52050&p_submitted=N&p_rank=&p_answer=&p_source=External)
    220 server.company.com Microsoft ESMTP MAIL Service, Version: 5.0.2195.5329 ready at Fri, 23 Jan 2004 10:27:22 -0600
    250 server.company.com Hello [10.1.1.176]
    250 2.1.0 [email protected]...Sender OK
    550 5.7.1 Unable to relay for [email protected]
    554 5.5.2 No valid recipients
    500 5.3.3 Unrecognized command

    I agree, it is ususual for an SMTP server to check the validity of the reverse-path address, because mailers could just use a invalid address on a valid domain, e.g. [email protected] The address in the "MAIL FROM:" command gives the reverse path to communicate errors and can be different from the actual sender address.
    In any case, this is quite irrelevant for the current discussion, because address verification has nothing to do with relaying.
    The error message:
    550 5.7.1 Unable to relay for [email protected]
    is completely unrelated to your:
    450 Unable to find nowhere.com
    Just to clarify, I was talking about address in the FROM: field of the message header, and not what is
    communicated in the "MAIL FROM:" SMTP command. (Similarly, the TO: field in the header is not used for message targeting and can be anything, it can even be missing and the SMTP server still does not care. Targeting is done entirely with the RCPT TO: SMTP command which not contained in the header (the mail header is part of the message DATA). Refer to RFC 821 for further details.
    You probably won't find a legitimate SMTP server that allows relaying, so the solution is to use the designated SMTP server for the particular location.
    LabVIEW Champion . Do more with less code and in less time .

  • Recieve emails but can not send. email rejected by server

    I am able to recieve emails on iphone 4s but cannot send.  POP outgoing server settings all same as on PC. Error message is "the recipient,XXXX was rejected by the server".  email account is hosted by GoDaddy.com

    Hi, Lawernce.
         Your issue with the iPhone's Mail Application might be due to two factors - 1. The otugoing server information might be incorrect. 2. The outgoing server credidentials might be incorrect. To change these, tap settings from the home screen, tap the Mail, Contacts, and Calendars button, tap the account you want to change, and contact Go Daddy for the correct server credidentials.
                              Austin James Gibson
                       CEO, AustinWireless, Inc.

  • I have 2 email accounts the second one i have only recently added, i have sent one email from my second account but i cant seem to send anymore, it says "cant send email with selected server" i am still able to send emails from my first account. Any ideas

    I have 2 email accounts, the second i only just recently added, i was able to send an email from this account after i added the account but am not able to send anymore emails. It says "unable to send email with selected server" there are no other servers to choose from. please help! TIA

    Hi apmichael,
    If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Regards,
    - Brenden

  • IPhone 6 is unable to send email because the sender address was rejected by the server

    When I try to send emails from my Microsoft Outlook for Mac, I get a message that says "Unable to Send Email.  A copy has been placed in your Outbox.  The sender address was rejected by the server."  I've checked all the settings (it is a POP account).  I've deleted and re-installed.  Any suggestions??

    Please see this article on setting up an email account using the shaw mail server.
    https://community.shaw.ca/docs/DOC-2181
    Good luck Friend.

  • Cant send email. rejected by the server

    unable to send email. i can receive and view but get the error message " rejected by the server because it does not allow relaying"

    No, All data and contents will not be lost.
    All settings will be reset to default, so these are a few you may need to reset if you have changed them:
    Enable Location Services
    WIFI - to connect again
    Bluetooth - Re-Pair again
    Sound(Ringtone)
    Wall Paper
    Passcode Lock (Setting, General)
    Brightness
    Battery Percentage (Setting, General, Usage)
    Mail (Default Account, Show Recent Messages, Fetch New Data, Time Zone Support)
    Auto-Lock (Setting, General)
    Messages (Notification, Messages, Show Preview) (Messages, Character Count)
    Contact (Sort Order, Display Order)
    Application Store Itune Account (Use existing account)
    Restriction (if you want it On)
    Call Forwarding, Call Waiting...... if any
    World Clock (Application)

  • I keep getting the following message when trying to send email, email rejected by server because it does not allow relaying

    when trying to send emails on my Iphone i get the message
    email rejected by server because it does not allow relaying
    can anyone help me with this problem

    Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail ServerSMTP>Primary Server then turn Server ON and fill in both User Name +Passwordunder Outgoing Mail Server.

  • Just downloaded iOS 7.0 on iPhone and now cannot send email -sender address rejected by server???

    JusJust downloaded iOS 7.0 on iPhone and now cannot send email -sender address rejected by server???

    What happens when you go to the web based mail for your email account?
    Are you able to login and send / receive messages from the web?
    If so, you might need to check outgoing email settings on your iPhone
    Settings > Mail, Contacts Calendars
    Tap on the account you are having an issue with
    Tap on the email address beside the word Account
    Tap on info beside SMTP  (SMTP = outgoing mail server)
    Tap on the SMTP server name again. 
    Make sure server is turned on
    Check settings & port info, password, etc.
    Good luck!

  • Unable to send email from iPhone or ipad, Unable to send email from iPhone or ipad

    Recently, I have become unable to send emails from my comcast email account.  I tried uninstalling and reinstalling the account, but get an error (Cannot send. Username or password for Comcast invalid).  The username and password are correct, though, as my email works fine on my non-Mac laptop. Any suggestions?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to delete ALL mail messages from iPhone/iPad in one step
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom

  • TS3899 I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) acco

    I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) account. I get the error message "A copy has been placed in your Outbox. The sender address "name"@tiscali.co.uk was rejected by the server".

    Hi apmichael,
    If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Regards,
    - Brenden

  • 'Sender was rejected by server', SMTP greyed out?

    Today when trying to send an email I received the message 'Sender was rejected by server'. I tried deleting my account and re-adding it, which didn't work, and I tried going to the SMTP server to type in my username and password but the area was greyed out so I was unable to type anything! Any help you could give me would be greatly appreciated - this is swiftly becoming frustrating since my iPad had been working perfectly until now!
    Thanks!

    Yes, I do indeed use Yahoo Mail.
    I don't know how relevant this may be but I created an iCloud email not long after posting this query - I am now able to send emails once again! Does adding an iCloud account have anything to do with it or has Yahoo mail been fixed?
    Thanks again! :)

  • Unable to send emails in Windows Live

    Since installing the last update on Windows Live I've been unable to send emails and get the following message:
    The server does not support a SSL connection.
    Subject 'Re: Northern history'Server Error: 250Server Response: 250 8BITMIMEServer: 'mail.btinternet.com'Windows Live Mail Error ID: 0x800CCC7DProtocol: SMTPPort: 25Secure(SSL): Yes
    I would really appreciate some help with this, I've tried using BT yahoo mail instead but miss the ability to request a read receipt, something I found invaluable for my work.
    Thanks in advance.
    Solved!
    Go to Solution.

    nic54 wrote:
    Since installing the last update on Windows Live I've been unable to send emails and get the following message:
    The server does not support a SSL connection.
    Subject 'Re: Northern history'Server Error: 250Server Response: 250 8BITMIMEServer: 'mail.btinternet.com'Windows Live Mail Error ID: 0x800CCC7DProtocol: SMTPPort: 25Secure(SSL): Yes
    I would really appreciate some help with this, I've tried using BT yahoo mail instead but miss the ability to request a read receipt, something I found invaluable for my work.
    Thanks in advance.
    Hi.
    You have an option set that is incorrect I'm afraid.
    In the Account properties, have a look at the Advanced tab, and make sure that the first option (This server requires a secure conection) is not ticked.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Sender address rejected by server smtp.freeserve

    I have minimal [Read NO] understanding of how this all works so please bear that in mind.
    Recently I have been trying to send emails from the Mail App on the iMac version 10.6.8. (I'm guessing that's snow leopard).
    I keep getting the message: sender address rejected by server smtp.freeserve.co.uk.
    I do not understand why this is happening.
    My accounts and mail are all connected and logged in to the internet/server, there are no mistakes in my
    email address or anything so I just don't understand what could possibly be going on.
    Please help, I need possible problems (and explanations) and I definitely some possible solutions.
    Thank you so much in advance.

    You shouldn't post an e-mail address in a public forum.
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Unable to send email.  how to fix?

    suddenly received msg. "unable to send email.  your outgoing server does not support authentication.  check settings".  no problems sending with other devices ie, iPad and iMac.  Email is mac.com

        Hi there Alexandria049!
    Email is so important on our smartphones! I'm sorry yours doesn't seem to be working.
    I would highly recommend removing it and readding it.
    Please follow these steps and let us know if it works:
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=31012
    Thanks,
    MelissaM_VZW
    Follow us on Twitter @vzwsupport

Maybe you are looking for

  • How to setup  workplace message in SAP system

    Hi Experts, how to setup  workplace message in SAP system. when am logon SAP GUI i am getting mesage of Document workplace. ( you have one new document) saying that in Inbox i have 1 document. my client they dont want Receive that pop up message. thy

  • Layering two Images with transparency

    Ok, so I have my own JComponent, and for the painting I have two Images. The main one which contains all the stuff I want to paint, and the overlay which contains temporary thing I want on top of the main one. To make this work, I need overlay to be

  • Epson scanner and image capture: blank white image

    I've been trying to make an epson perfection 1670 scanner work on an iMac running 10.6.4 Since epson no longer specifically supports this model I am going to Image Capture and the epson drivers supplied by Apple. I have downloaded/installed the updat

  • Default program to open .doc files?

    is there a way to instruct my iMac and my Macbook to "open all .doc or .docx files using Pages"? Is there a way to instruct my iMac and Macbook to "open all .xls and .xlsx files using Numbers"? We no longer have Word and Excel loaded, so now we have

  • New XI R3 install - 'unexpected error' on report load

    This is a new XI R3 install on a windows server.  When I go to add a crystal report to a object package I get a 'unexpected error' message.  Can't load any reports.