HT1695 Blank browser when trying to connect

The browser won't connect to any websites, either through the public wifi where I am located or via Verizon. There is just a blank white screen. It won't even get to the site that allows you to agree to the terms of use for the public wifi here.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

I'm getting a blank screen when trying to connect to my App Store.how can I fix this ?

I'm getting a blank screen when trying to connect to my App Store.how can I fix this?

I got this error after upgrading to new version. After searching these pages for an answer and not finding a usable one, I simply quit and re-opened iTunes, and... voila! Problem solved!

Is anyone else but me get the blank page when trying connecting to itunes store??

For almost a week of trying to solve this i'm giving up.
Aplle custumor service tried to help but failed.
I'm on windows 7 and the latest itunes 10.5.3.
My girlfriend has itunes on mac and it works fine on the same network so what is the problem???

Is anyone else but me get the blank page when trying connecting to itunes store??
Yes, many people are. To fix it, check this guide: iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.

Error code 306 when trying to connect to apple store

error code 306 when trying to connect to apple store

Refer here from Apple Article:
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
For more information on other security software, see iTunes: Troubleshooting security software issues.

RMI Error when trying to connect to remote server

We are getting an RMI error (below) when trying to connect to a remote weblogic 9 server with mission control.
We are running a portal application on the app server. If we connect using mission control before the app starts then mission control connects successfully.
If we wait until the portal application is running then we get the following error when we try to connect:
Could not open Management Console for UAT Live (1).
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
     java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
     java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:162)
     at com.sun.jmx.remote.internal.PRef.invoke(Unknown Source)
     at javax.management.remote.rmi.RMIConnectionImpl_Stub.getMBeanInfo(Unknown Source)
     at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.getMBeanInfo(RMIConnector.java:1031)
     at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:262)
     at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:297)
     at com.jrockit.console.rjmx.RJMXConnectorModel.initializeAttributeInfos(RJMXConnectorModel.java:294)
     at com.jrockit.console.rjmx.RJMXConnectorModel.<init>(RJMXConnectorModel.java:99)
     at com.jrockit.console.rjmx.RJMXConnectorModel.<init>(RJMXConnectorModel.java:113)
     at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:36)
     at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:73)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
     at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:371)
     at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:165)
     at java.rmi.server.RMIClassLoader$2.loadClass(RMIClassLoader.java:620)
     at java.rmi.server.RMIClassLoader.loadClass(RMIClassLoader.java:247)
     at sun.rmi.server.MarshalInputStream.resolveClass(MarshalInputStream.java:197)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1544)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1466)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1699)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
     at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:290)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:139)
     ... 11 more
thanks

As poorem suggested, I would check that the time is the same on both the identity and vcac appliances. It has been a while since I posted this question but I believe that did get me past that specfic error. I changed the timezone on each and made sure the times were correct and the same.

My mac freezing when trying to connect to a web site

My Mac freezes when trying to connect to a website

What browser are you using? Try using another one to see if it is an application problem or a system wide problem.
Firefox

TS1424 Getting error -1202 when trying to connect to My Wish List. Says there was an error in the ITunes store and to try again later. Any work arounds for this? I have no other problems accessing anything else.

Getting error -1202 when trying to connect to 'My Wish List" in ITurnes. Says there was an error in the ITunes store and to try again later. Have no other problems connecting or purchasing......

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen L*/Coo* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

TS1398 my network but just hangs when trying to connect? I've have reset the settings and all sorts? My iPhone can connect fine? Any advise would be great!

My iPad can see my network but just hangs when trying to connect? I've reset the settings and all sorts? My iPhone can connect fine? Any advise would be great!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

Hi All,
I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
Here is my server.xml
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<GlobalNamingResources>
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<Resource auth="Container" description="Users and Groups
Database" name="UserDatabase"
scope="Shareable"
type="org.apache.catalina.UserDatabase"/>
<Resource name="jdbc/DefaultDS" scope="Shareable"
type="javax.sql.DataSource"/>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.
MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<ResourceParams name="jdbc/DefaultDS">
<parameter>
<name>validationQuery</name>
<value></value>
</parameter>
<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>4</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>2</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>

<Service name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/DefaultDS">

<parameter>
<name>maxActive</name>
<value>8</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>4</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>

<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>

<parameter>
<name>description</name>
<value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Host>
</Engine>
</Service>
</Server>
and my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">

<web-app>
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
Connection con = ds.getConnection();
return con;
I tried connecting as mentioned in this website
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
Please help urgent
Sorry for long file. Can any one please help me in solving this problem.
Thanks in advnace
Kurakula

I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
MOD

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

Error message when trying to connect Classic 120GB to iTunes An internal error occurred during: "FindSonarTrackJob". java.lang.NullPointerException

When trying to connect to iTunes I get this message
An internal error occurred during: "FindSonarTrackJob".
java.lang.NullPointerException

I too am having this problem and have had, for about a week now.
I've found that by logging off itunes (if I can), closing it down, and then restarting it, sometimes allows it to work for one transaction (say downloading an updated app). After that it's back to the same error.
Really annoying.

Error message WMC604 in VZAM when trying to connect to 4G using Novatel USB551L.

VZAM recognizes the modem, and attempts to connect to 4G. After about 10 seconds, a message appears,"Error WMC604, Device could not establish a connection". (I have no problem connecting to 3G, just 4G)
One clue: If I have "Control Panel>Network Connections>Novotel 551L open when I try to connect, I can watch (if I am connecting to 3G) the modem aquire an IP address and connect. If I am connecting to 4G, there is no such activity shown on Control Panel>Network Connections>Novatel 551L modem. It just does nothing until the error message appears in VZAM. It's as if VZAM is not communicating with the modem although during this time VZAM displays a message "connecting".
I have created a dial-up connection in Windows 7 according to the Verizon knowledge base article ID=29355 just so I could use 4G, and the modem connects and works just fine. I just wish I get it to connect to 4G using VZAM.
I am using VZAM version v7.6.3.1(2642f) and one of the things that VZ tech support suggested was replace the SIM card, but that didn't make any difference. I am using Dell XPS 8300 desktop running Win 7 Home Premium,SP1 currently, although problem is the same on my Dell 5160 laptop running Win XP, SP3.
Hoping someone here on this board can help. I have spent hours on the phone with Verizon tech support and they say they have never heard of this error, and have no clue how to make it go away. In checking Google, I see that it is in fact a fairly common error in VZAM, but no one seems to know how to fix it......Verizon reps on the board feel free to come to my rescue?
HELP!!!!

AdamE_VZW
Thank you for your reply. I checked Device Manager for conflicts and see none. I opened VZAM and Device Manager>Novatel Modem side-by-side on the screen and attemped to connect to 4G using VZAM while watching Device Manager for conflicts. There were none indicated when the WMC604 error appeared in VZAM. According to Device Manager, my Novatel modem driver is version 1.1.12.0 ; dated 12/8/10. The "update driver" button is grayed out so I don't know how to check for a newer version. This version is the one that came on the VZAM install CD I belive.
Some background about this problem: When I first got this modem and installed the software, it worked as it should. It came up in Global mode and connected to a weak 4G signal that was comming from the Portland OR airport. Because the signal was weak and un-reliable, the modem would constantly shift back to 3G, and then every few minutes back to 4G, over and over. I got tired of putting up with the constant hunting, and, using the diagnostic screen, locked it into EVDO mode until 4G went live in Portland OR in the middle of June. During the time it was in EVDO (3G) mode, I had no problem connecting to 3G using VZAM. When Portland went live, I locked it back to LTE mode, and that was when I discovered the error WMC604 message. This was using my previous computer, a Dell Dimension 4500 desktop, Win XP,SP3, and an external Wilson log-periodic tri-band antenna. Since Portland went live, my current RSSI for 4G runs around -68db, and SINR varies between -9 to -12 db.
I recently got my present computer, a Dell XPS-8300 desktop, Core i7, Win 7 Home Premium, SP1. I did a fresh install of VZAM on this new computer using the CD that came with the USB551L modem and then checked online (using 3G) for VZAM updates. It says I have the latest version. The problem is exactly the same on the new computer as it was on my other 2 computers. That tells me that the problem must lie with the modem firmware or hardware, because the problem follows the modem, no matter what computer it is hooked up to. I even took it back to the Verizon store where I got it and they hooked it up to one of their computers and got the same error message when trying to connect to 4G. 3G worked properly
As I mentioned before, the modem instantly connects to 4G using the Win 7 dial-up connection I created and gives pretty good speeds, about 10MB down and 4-5MB up, according to SpeedCheck.com.
I can use it the way it is, it is just frustrating that it won't work using VZAM.
Thank you for your attention and help,
Inst_Tech

Blue screen when trying to connect ipod

When trying to connect my ipod to my computer it reboots it into a blue screen that looks something like this...
STOP: 000000007F (0000000008, 0X80154000 etc, etc.)
minidump something something.
I looked in my minidump folder but there was nothing in it. Any suggestions?

Okay.
Let's see if we can get a minidump generated for the crash.
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
With those settings in place, does a minidump file get generated for the crash?

Why do I keep getting a connection error when trying to connect to SQL?

Environment:
LiveCycle ES2
Windows Server 2008
JBOSS
Oracle Application DB
When trying to connect to SQL, I get this error message in the log.
Exception: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.); - nested throwable: (org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.))
I have these two files located in \\jboss\server\lc_oracle_cl\lib
sqljdbc.jar
sqljdbc4.jar
I was told all I needed to do was drop these two files in the directory above and restart JBOSS. Is there something I'm missing?
Jesse

Hi Jesse,
The driver you are using is for SQLServer Database. Since you are using Oracle as your database, you need an oracle driver.Please copy ojdbc6.jar from the [installDir]/lib/db/oracle/ directory and try again.
Thanks,
Ruchi

HT1695 Blank browser when trying to connect

Similar Messages

Maybe you are looking for