HT1695 Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?
Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?
Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts?
Similar Messages
-
I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.
Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?
Checked RoaringApps App Compatibility Table. These are apps not drivers but..
All I see listed is:
- Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
- Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
- Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
http://roaringapps.com/apps:table/tags/_e/index_tags/_e
On the Epson Website. Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
Drivers:
- Printer Driver v8.63
Utilities:
- Remote Panel 2 Utility v1.30
- Uninstall Center v1.1.0
Firmware:
- Firmware Update version KND14BA
Epson Stylus Pro 7700 Printer - Drivers & Downloads
Did you download and install all of these from the Epson website? -
I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the moment???
Settings > General > Reset > Reset Network Settings
-
For which one is the priority? constructor or method ?
Hi
if i have A constructor and a method and both of them working on the same variable, so for which one is the priority ?
Message was edited by:
scrolldownwhichever one gets there first. no, really. and a
constructor is just a methodAu contraire, mon fr?re!
Constructors are not methods, because unlike methods,
they are not
even technically members of a class.
http://java.sun.com/docs/books/jls/third_edition/html/
classes.html#8.8
<quote>
Constructor declarations are not members. They are
never inherited and therefore are not subject to
hiding or overriding.
</quote>I stand corrected there, then. aren't they described by the same bytecode instructions, though? I know that when using, say, BCEL, constructors and initializers are generated as methods. whatever, I'm obviously barking up the wrong tree there -
Which MacBooks had the unresponsive keyboard
Before i buy one on ebay
I need to know which macs had the unresponsive keyboard problemThe basic MacBook1.1 in this auction would require a retail Snow Leopard 10.6 DVD ($20) and an upgrade in RAM to the maxiumum this old 2006 (first edition) model can use, two - 1024MB RAM. Just to start.
Maximum Memory
2.0 GB
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
And that would be it, regarding a hardware upgrade; no newer OS X can be run in it.
While a solid-state drive could make it run faster, there isn't much need to do so, without software and a purpose to upgrade this; basic web browsing and email, and other things would be about it, even with an SSD. For the cost to get and install the SSD, you could be looking for a 2009 MacBook5.2.
And some resellers include the operating system discs for the software they put inside. As well they should, because the disc is part of the license to have and use the software. And this vendor still includes software without the original installers. So, you can't reinstall anything. It ships with Tiger OS X 10.4, but no DVD; there are no current updated web browsers, for that vintage system. And w/1024MB (or 2- 512MB RAM) it would need more. Two matching chips.
Not recommended IMHO.
Good luck -
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
Have 2 ipads setup the same but 1 no longer connects to the network. Have reset network settings and tried to reconnect but no luck. Any advice?
Have you tried rebooting your wireless router by removing power from it for about 30 seconds, then powering it back up?
-
I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but i didn't load at all. Not even after 3 hours..
so i tried to disconnect the phone, but the loading meter is still there like it's frozen can't push any button or anything at all.. what should i do?Restart your iPhone by holding down the on/off and home buttons until your see the Apple logo.
-
Trying to reinstall Acrobat Pro X from disc onto win 8.1 system. (Previous installation got corrupted) Continually getting message ‘Acrobat has detected another process which has not yet completed…’. Have now closed system both cold (full shutdown) and warm (restart) over 10 times. Every time I go to reinstall I get message.
I would run http://labs.adobe.com/downloads/acrobatcleaner.html and delete any Acrobat folders that have been created, then try again. Be sure to log in as the administrator and disable anti-virus when you have problems like this.
-
I have a cellular data account on my iPad. Almost immediately after I signed up, my e-mail was hacked and had to be cancelled. I cannot get into my AT&T cellular data account now to change the billing and account to my new e-mail. Please help.
According to the AT&T Wireless web site, you can manage your iPad data plan either from the iPad, or by using a web browser:
From the website
Log in to your account at att.com/iPadlanding using the email address and password you used during activation.
Your account information will display. Select the desired account change option then tap Next.
Read the Terms of Service, and then tap Accept.
Review the Payment Summary to ensure the details are correct. Use the Back button if changes are required, otherwise tap Submit.
Read the Confirmation message then tap OK. -
When I wake my iMac from sleep, the wireless does not connect. I have to shut shutdown and then restart and then it connects. I am running Lion 10.7.3 Any thoughts?
Been waiting along time for this problem to be fixed. Unfortunately the update hasn't help at all and even made the situation worse. Now my airplay connection from iMac to stereo abruptly stops after about 10-15 min. so I have to go over and quit wifi, start it up and find my airport network. Not sure why it always has a problem with the apple airport network. My neighbor's pc network is always there.
-
My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore
You could try this
Temporarily disable security on your home network
See if the iPad connects
If it does then reset the security - with the same or different password -
I just got the 5s, every time in try to update my apps it's asking for a second password to an Apple ID that is not mine-- it asks for mine and then another one pops up after I enter mine .what do I do?
where did you get this phone from
-
My mouse pointer in finder is not working by double clicking on the application.I have to double click and select open for opening the application.Can you suggest me some settings to fix this problem?
Hi,
Try this ... reboot your Mac and see if double clicking works again.
Also, you can just select the Application you like to open and hold down the Command+O to open.
Also, did you check your setting for the mouse in system preferences.
Dimaxum
Maybe you are looking for
-
I can't see an app on my iphone, but when i search i get it. i've made room for the icon to show up on screen, but how do i actually get the icon to appear?
-
Tracing of message in Status Bar using Call Transaction for MRBR
Hi As per the business requirement, I would like to automate the MRBR Transaction. I am achieving this by using Call Transaction. After aaplying certain company codes as an i/p; i receive the invoices as an o/p in a ALV Lay out. Say for example, 100
-
What do i do if the battery life isn't what it should be?
I got my Ipod in late January or early February as a late xmas present, and since then it's become the closest thing to crack I can think of. However, I never really listen to it for more than say a 1/2 hr in the am another 1/2 hr in the pm. Maybe 2-
-
The system cannot resolve database name" while restoring AppSet
Hello Everyone, I am having an issue restoring AppSet using Server Manager. The error I'm getting is the following: "The system cannot resolve the database name. Check that your connection with SQL Server still exists, or use another version of SQL S
-
The EDS Job manager failed to start
Hi I am installing the first Exchange 2013 Server in my Exchange 2007 environment It has completed successfully but in the Application Event Log I see an error, twice: EventID: 1032 The EDS Job manager failed to start the following jobs: Job: 'Transp