HT1695 Cannot connect face-to-face service

Cannot connect to yesterday messaging and face to face time on my mini iPad mini I have two iPads one third-generation iPad and iPad managed to both working face-to-face until one was changed to iCloud only has email Andy I don't have both emails the same one of my phone numbers on.
I Lentjes settings on the face-to-face through the settings and paste Estrin message he was unable to login even after going through that it only getting one screens along of Corona on the instant messages and face-to-face shows outside cloud address and other email address

Similar Messages

Error: [NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM

Hi,
Im unable to open the RPD online getting following error.
Note: Im not done any changes. Its works good till yesterday EOD.
Error:
[NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM.
[NQSError:37001] could not connect to the oracle BI server instance..
Kindly help me to fix this issue.

Hi,
Could you access the answer side.
Could you see the reports.
Do one thing, take a back up of NQS config file from <Oracle Location>\instance\instance1\config\obiserver folder\nqsconfig.ini file.
Copy nqs config file if you have already have a back up.
Restart the services and try once.
http://mkashu.blogspot.com
Regards,
VG

Unable to open analytics/EM/console(Cannot connect to BI Security Service)

Hi,
After fresh install obiee11.1.1.5.0 1st time i can able to ran presentation services and FMW but after re boot machine i got below kind of error. while checking opmnctl status all serivces are up...
[2012-05-15T01:52:23.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [13037] Cannot connect to BI Security Service, please make sure this is running properly (with SSL or not) in EM.
[2012-05-15T01:52:23.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] nqsserver:     Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.5.0.110427.1127.000.
[2012-05-15T01:52:25.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 161c] [43071] A connection with Cluster Controller W01BGPCBIAPP1A.reg1.uat1bank.dbs.com:9706 was established.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 15cc] [nQSError: 46066] Operation cancelled.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 161c] [nQSError: 46066] Operation cancelled.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [43031] :     Oracle BI Server shutdown.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [85008] MDX Member Name Cache subsystem statistics - Entries: 0, Sizes: 0 bytes, Overall Queries: 0, Hits: 0(0%), Misses: 0(0%).
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [85007] MDX Member Name Cache subsystem stopped.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [58001] Query Cache Statistics -- Hits:0(0%), Qualified Misses:0(0%), Unqualified Misses:0(0%).
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [14058] Unloaded all subject areas.
[2012-05-15T02:11:23.000+00:00] [OracleBIServerComponent] [WARNING:1] [] [] [ecid: ] [tid: 147c] Warning: Clustering and cache are enabled for this OBIS node, but cluster aware cache is disabled. This can lead to inconsistencies.
[2012-05-15T02:11:32.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [36007] Loading repository D:\Oracle\Middleware\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\SampleAppLite_BI0001.rpd.
[2012-05-15T02:11:33.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: a74] [14055] Loading subject area: SampleApp Lite ...
[2012-05-15T02:11:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: a74] [14056] Finished loading subject area: SampleApp Lite.
[2012-05-15T02:11:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [58002] Query Cache loaded with 0 entries from saved cache files.
[2012-05-15T02:11:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [85003] MDX Member Name Cache subsystem started successfully.
[2012-05-15T02:11:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [85004] MDX Member Name Cache subsystem recovered entries: 0, size: 0 bytes.
[2012-05-15T02:11:35.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [13026] Error in getting roles from BI Security Service: 'Error Message From BI Security Service: [nQSError: 12002] Socket communication error at call=Connect: (Number=0) Call=NQRpc: An unknown socket communications error has occurred. [[
[nQSError: 12010] Communication error connecting to remote end point: address = 10.10.10.10; port = 9704.
[nQSError: 46119] Failed to open HTTP connection to server 10.10.10.10 at port 9704.'
[2012-05-15T02:11:36.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [13037] Cannot connect to BI Security Service, please make sure this is running properly (with SSL or not) in EM.
[2012-05-15T02:11:36.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] nqsserver:     Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.5.0.110427.1127.000.
[2012-05-15T02:11:36.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 190c] [43071] A connection with Cluster Controller W01BGPCBIAPP1A.reg1.uat1bank.dbs.com:9706 was established.
[2012-05-15T02:11:39.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e01ZlqXFw00Fzzw0w0000184000003] [tid: 1340] Error Message From BI Security Service: [nQSError: 12002] Socket communication error at call=Connect: (Number=0) Call=NQRpc: An unknown socket communications error has occurred. [[
[nQSError: 12010] Communication error connecting to remote end point: address = ; port = 9704.
[nQSError: 46119] Failed to open HTTP connection to server 10.10.10.10 at port 9704.
*[2012-05-15T02:11:39.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e01ZlqXFw00Fzzw0w0000184000003] [tid: 1340] [nQSError: 13037] Cannot connect to BI Security Service, please make sure this is running properly (with SSL or not) in EM.*
*[2012-05-15T02:11:39.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e01ZlqXFw00Fzzw0w0000184000003] [tid: 1340] [nQSError: 13037] Cannot connect to BI Security Service, please make sure this is running properly (with SSL or not) in EM.*
Thanks
Deva

Hi,
While installing Admin Server/Bi_Server i forgot to reset the boot.properties file(encripted password) after re boot i just reset and Restarting the opmn and BI Services its got woking
Thanks
Deva

Cannot connect to a Customer Service

I cannot connect with a customer service. I am being charged today for calls I could not connect so 8 minutes of my subscription are gone because of technical issues. Am trying for over an hour to talk to someone via chat but to no avail. I filled 3 times all information and it says wait for the chat to start and nothing happens. This is beyond redicilous. I do not have time to stay here and solve nothing.
I came back to skype after many years in order to use the phone service but made a huge mistake. This is really bad. Wil go back to gmail voice.

Please follow the instructions to contact Skype customer service. When you reach the point to start th chat don't miss to click on the green "Start chat" button. Only then a new browser window with the chat is being opened. If that's not the case please check the popup blocker settings of your browser to allow those popups.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Cannot connect to any gaming services

I son cannot connect to any gaming services on my Wii U or the computer, even when they are connected to the WiFi network. I can, however, connect to the internet, but not any games. Please help

see this link
How do I fix almost all Shockwave and Flash Player issues
While I work on behalf of HP I'm not speaking for HP but trying to provide best effort support.

Cannot connect to P2G with Service Designer

Hi,
I've installed Portal 2 Go 1.0.2 on a Solaris computer, but I cannot connect to it using the service designer that runs on a Windows 2000 box. The detail folows.
Any help is welcome.
oracle.panama.pasm.PASMException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: oracle.panama.core.rmi.server.PersistentServiceRmiGen_Stub; Local class not compatible: stream classdesc serialVersionUID=-8127933252554616034 local class serialVersionUID=-2337353562359591603
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:148)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.PASM$1.windowOpened(PASM.java:428)
at java.awt.AWTEventMulticaster.windowOpened(AWTEventMulticaster.java:280)
at java.awt.Window.processWindowEvent(Window.java:632)
at javax.swing.JFrame.processWindowEvent(JFrame.java:182)
at java.awt.Window.processEvent(Window.java, Compiled Code)
at java.awt.Component.dispatchEventImpl(Component.java, Compiled Code)
at java.awt.Container.dispatchEventImpl(Container.java, Compiled Code)
at java.awt.Window.dispatchEventImpl(Window.java, Compiled Code)
at java.awt.Component.dispatchEvent(Component.java, Compiled Code)
at java.awt.EventQueue.dispatchEvent(EventQueue.java, Compiled Code)
at java.awt.EventDispatchThread.pumpOneEventForComponent(EventDispatchThread.java, Compiled Code)
at java.awt.EventDispatchThread.pumpEventsForComponent(EventDispatchThread.java:95)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:90)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
oracle.panama.PanamaException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: oracle.panama.core.rmi.server.PersistentServiceRmiGen_Stub; Local class not compatible: stream classdesc serialVersionUID=-8127933252554616034 local class serialVersionUID=-2337353562359591603
oracle.panama.PanamaException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: oracle.panama.core.rmi.server.PersistentServiceRmiGen_Stub; Local class not compatible: stream classdesc serialVersionUID=-8127933252554616034 local class serialVersionUID=-2337353562359591603
at oracle.panama.core.rmi.client.RMIServer.createModelConnection(RMIServer.java:54)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:184)
at oracle.panama.pasm.ConnectAction.rmiConnect(ConnectAction.java:178)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:142)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.PASM$1.windowOpened(PASM.java:428)
at java.awt.AWTEventMulticaster.windowOpened(AWTEventMulticaster.java:280)
at java.awt.Window.processWindowEvent(Window.java:632)
at javax.swing.JFrame.processWindowEvent(JFrame.java:182)
at java.awt.Window.processEvent(Window.java, Compiled Code)
at java.awt.Component.dispatchEventImpl(Component.java, Compiled Code)
at java.awt.Container.dispatchEventImpl(Container.java, Compiled Code)
at java.awt.Window.dispatchEventImpl(Window.java, Compiled Code)
at java.awt.Component.dispatchEvent(Component.java, Compiled Code)
at java.awt.EventQueue.dispatchEvent(EventQueue.java, Compiled Code)
at java.awt.EventDispatchThread.pumpOneEventForComponent(EventDispatchThread.java, Compiled Code)
at java.awt.EventDispatchThread.pumpEventsForComponent(EventDispatchThread.java:95)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:90)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: oracle.panama.core.rmi.server.PersistentServiceRmiGen_Stub; Local class not compatible: stream classdesc serialVersionUID=-8127933252554616034 local class serialVersionUID=-2337353562359591603
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: oracle.panama.core.rmi.server.PersistentServiceRmiGen_Stub; Local class not compatible: stream classdesc serialVersionUID=-8127933252554616034 local class serialVersionUID=-2337353562359591603
java.io.InvalidClassException: oracle.panama.core.rmi.server.PersistentServiceRmiGen_Stub; Local class not compatible: stream classdesc serialVersionUID=-8127933252554616034 local class serialVersionUID=-2337353562359591603
at java.io.ObjectStreamClass.validateLocalClass(ObjectStreamClass.java:437)
at java.io.ObjectStreamClass.setClass(ObjectStreamClass.java, Compiled Code)
at java.io.ObjectInputStream.inputClassDescriptor(ObjectInputStream.java:785)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java, Compiled Code)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java, Compiled Code)
at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:978)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java, Compiled Code)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java, Compiled Code)
at oracle.panama.core.rmi.server.ServerImpl_Stub.getPersistentService(ServerImpl_Stub.java:43)
at oracle.panama.core.rmi.client.RMIServer.createModelConnection(RMIServer.java:51)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:184)
at oracle.panama.pasm.ConnectAction.rmiConnect(ConnectAction.java:178)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:142)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.ConnectAction.connect(ConnectAction.java:151)
at oracle.panama.pasm.PASM$1.windowOpened(PASM.java:428)
at java.awt.AWTEventMulticaster.windowOpened(AWTEventMulticaster.java:280)
at java.awt.Window.processWindowEvent(Window.java:632)
at javax.swing.JFrame.processWindowEvent(JFrame.java:182)
at java.awt.Window.processEvent(Window.java, Compiled Code)
at java.awt.Component.dispatchEventImpl(Component.java, Compiled Code)
at java.awt.Container.dispatchEventImpl(Container.java, Compiled Code)
at java.awt.Window.dispatchEventImpl(Window.java, Compiled Code)
at java.awt.Component.dispatchEvent(Component.java, Compiled Code)
at java.awt.EventQueue.dispatchEvent(EventQueue.java, Compiled Code)
at java.awt.EventDispatchThread.pumpOneEventForComponent(EventDispatchThread.java, Compiled Code)
at java.awt.EventDispatchThread.pumpEventsForComponent(EventDispatchThread.java:95)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:90)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
null

Hi there RavenTW,
I would recommend taking a look at the troubleshooting steps found in the articles below.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
-Griff W.

Cannot connect to Lion VPN service unless server is locally logged into?

I work remotely a lot. After I upgraded to Lion server, I am unable to connect to the VPN service remotely unless I physically go over to the server (mac pro) and log into the desktop manually.
Previously, if my Snow Leopard server restarted (due to power failure, etc) and it re-booted up to the login screen, I could still logon to the VPN remotely as the VPN service would always startup (at the login screen) without a user having to be logging in.
Now, with Lion Server (10.7.4), if the server restarts, I cannot login back to the VPN. I have to get someone to go over to the server and manually login, then I can access VPN just fine. (I do not, and will not turn automatic login on on my server due to the huge security risk.)
How do I get the Lion Server VPN service to startup before or at the logon screen even if no user is logged in?
Help is greatly appreciated!

Can you SSH into the box when VPN isn't working?
If so, ssh into the box, and look at the VPN logs when you're attempting to use the VPN. The logs are (usually) in /var/log/ppp/vpnd.log
I typically look at logs like this so I can see how they're updated in real time:
tail -f /var/log/ppp/vpnd.log
If you're VPN login is failing and there is data being pushed to that log, it may help us to figure out what's going on with your system.
Ricardo

Cannot connect to Azure Mobile Services as DataSource

I've created an Azure Mobile Service which is using .NET backend.
Project Siena isn't able to connect or work against this kind of data source.
Error message is
An error occurred connecting to Azure Mobile Service
I have also tried to create zz_config support table, and implement a custom TableController for serving the URI
tables/zz_config but I could only got few steps further, still without the possibility to read and use the model exposed by Mobile Services
This behavior has been reproduced with both Beta 2 and Beta 3
P.S. Adding the AMS as REST data source makes possible to import and use the model exposed. The operation of association in this case must be done per-table in Siena
Wheb can we expect Siena to work well together with the new version of Azure Mobile Services?
Massimo Prota
.NET MCAD - SP2007 MCTS - SP2010 MCPD and MCITP
My blog: http://blogs.ugidotnet.org/mprota - Twitter:
@massimoprota

Yes, that article is indeed precise and updated. I followed all steps described properly, especially for the part about setting up the database structure, and create
zz_config table (second post of the series)
I can connect to AMS (JS Backend) with Siena, but tables' names aren't showing up correctly, but display as
undefined, and from there on doesn't work properly.
JSON object returned from GET /tables/zz_config?$filter=(Key%20eq%20'table')
"id": "ccb9c9a8-9bae-41c8-87aa-277e2e0d1379",
"key": "table",
"value": "users"
I do confirm I have the same (incorrect) behavior using a .NET Backend where I set up
zz_config table and create a TableController mapped with it; with route
tables/zz_config
I confirm also I had the same behavior this morning with Beta 2, before I installed Beta 3.
P.S. The error message reported in my first post is returned only when the table
zz_config isn't setup correctly on AMS
Massimo Prota
.NET MCAD - SP2007 MCTS - SP2010 MCPD and MCITP
My blog: http://blogs.ugidotnet.org/mprota - Twitter:
@massimoprota

HT1695 cannot connect to itune store-message on i phone-why?

error message on I phone cannot connect to itunes store-how do I fix this?

It does not work in my case....
I did change time and date also but it didnt work too
what is wrog

HT1695 cannot connect to my wifi

i have just bought my new ipad 2 and have followed all instructions but cannot connect to wifi.i put in my password which is correct but an error message says "unable to join the network" i have tried all the different methods online to correct this but still cannot connect. even tunred of and back on my router. any help please

try to work encryption off on the router to see if that the problem
the horrible old and useless encryption called WEP is poorly supported on many newer devices
as it offers not real protection
unlike WPA -AES
also check of the router maker updated their wifi router firmware to a newer version which fixes incompatability with newer wifi devices

Cannot connect to ColdFusion Data/Service in Flash Builder 4

Hello,
I am attempting to connect to a ColdFusion data service using the Connect to Data/Service for Flash4 window, however, when I go to select service type I only see HTTP or XML as options. I have set-up my Flash project with CF Flash Remoting and when I type http://localhost:8500/flashservices/gateway into a browser I get a blank page, which I think means that the Flash gateway is working. I am going crazy trying to figure this out, any help would be greatly appreciated!
Thanks!

If you been a customer long enough call and ask for a unlock code for your phone and get a temporary sim to use (similar to how walmart here has straight talk) and use that. You will of course need to buy the sim and buy the time you use. This way it will avoid big charges on your bill etc.. So just call verizon and ask for a unlock code and you will take out your current phone sim (put it somewhere safe) and put the new sim in and turn phone on and put the unlock code in. Make sure the sim you get it set to use the type of network your phone is. (look at the specs of your phone) good luck.

HT1695 cannot connect ipod touch to wi-fi

brand new ipod touch g5. when connecting to wi-fi it requires an 8 digit password to activate the "join" button. our home network has a 5 diigt password. how do we bypass this feature?

Are you using WEP security? If yes you have to have the router to use the first key and as the password you have to enter the first hexadecimal key, not the paraphrase uses to generate the four keys. See:
iOS: Recommended settings for Wi-Fi routers and access points

HT1695 cannot connect to wi fi . also unable to delete fotos . there is no bin icon

new phone will not connect wi fi . also unable to delete fotos . no bin icon

Jillxz wrote:
I have fiber optic cable with no modem. Do I need to use the Blue cord that comes with the Cisco Valet M 10 router ?
I'm pretty much a dummy.
Hi try to access the link below that will help you. Reset the router first before reconfiguration.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...
Your set up should be like this. From the wall to the wan port of the router and from the lan port of the router to the computer.

Reporting Services server cannot connect

Hi,
I am trying to install the SAP BPC MS version and so far been hit with many issues. The latest issue is that the installer cannot connect to the Reporting Services server, in which from the installation documentation this should come as standard with MSSQL.
Any idea how to activate this manually?
Thanks.

Hi,
In that case, I believe, the reporting service was not installed. When you are installing SQL server, you need to check the reporting services from the list. If thats not selected, then it wont be installed.
I guess, you have to run the installation once again. While doing the installation, please check the required services from the list, including reporting services.
Hope this helps.

Cannot connect to the Service Manager portal WCF service...again

I've ran into this error a few times now, but I have usually been able to fix it. This time its being more stubborn.
This is a brand new 2012 R2 portal running on a brand new SharePoint 2010 SP1 two server farm. The web content server is installed on both of the webservers just like Travis has it in this blog: http://blogs.technet.com/b/servicemanager/archive/2012/05/04/how-to-configure-the-self-service-portal-sharepoint-site-or-the-web-content-server-for-load-balancing.aspx
We have it F5 load balanced with a 3rd party cert which is working fine. We get to the site and the app loads, but instead of seeing the only catalog item I have published, I see the red error at the bottom stating that it cannot connect to the WCF service.
I've double checked all my bindings in IIS and the web.config. When I look in the web server event log I see this:
System.ServiceModel 3.0.0.0 Event ID 3
WebHost failed to process a request. Sender Information: System.ServiceModel.Activation.HostedHttpRequestAsyncResult/37916227 Exception: System.Web.HttpException: The service '/ServiceHost/Services/DataAccessService.svc' does not exist. ---> System.ServiceModel.EndpointNotFoundException: The service '/ServiceHost/Services/DataAccessService.svc' does not exist. at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest() --- End of inner exception stack trace --- at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) Process Name: w3wp Process ID: 3004
The SMPortalTrace.log isnt being very helpful, but heres a copy of it:
Error,2014-06-20 13:19:22.8784441,System.Reflection.TargetInvocationException: [Arg_TargetInvocationException]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.00&File=mscorlib.dll&Key=Arg_TargetInvocationException ---> System.ServiceModel.CommunicationException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer ---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer ---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__1(Object sendState)
--- End of inner exception stack trace ---
at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.ServiceManager.Portal.ServiceCatalogSilverlightModule.Models.DataProvider.<>c__DisplayClass1.<FetchAllServiceOfferings>b__0(Object sender, AsyncDataCommandCompletedEventArgs`1 e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.<>c__DisplayClass2.<CompleteCommand>b__0(Object )
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, Boolean useFastPath, Delegate d, Object[] args)
at System.Windows.Threading.DispatcherSynchronizationContext.Send(SendOrPostCallback d, Object state)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.CompleteCommand(Object sender, AsyncDataCommandCompletedEventArgs`1 e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.OnCommandCompleted(Object sender, Exception exception)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataGatewayBase.CompleteAsyncDataCommandWithError(AsyncDataCommand command, Exception exception)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.ProxyExecuteCompletedHandler(Object sender, ExecuteCompletedEventArgs e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.<>c__DisplayClass4.<GetClientProxy>b__3(Object sender, ExecuteCompletedEventArgs args)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnExecuteCompleted(Object state)
Error,2014-06-20 13:23:12.7295391,System.Reflection.TargetInvocationException: [Arg_TargetInvocationException]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.00&File=mscorlib.dll&Key=Arg_TargetInvocationException ---> System.ServiceModel.CommunicationException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer ---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer ---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__1(Object sendState)
--- End of inner exception stack trace ---
at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.ServiceManager.Portal.ServiceCatalogSilverlightModule.Models.DataProvider.<>c__DisplayClass1.<FetchAllServiceOfferings>b__0(Object sender, AsyncDataCommandCompletedEventArgs`1 e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.<>c__DisplayClass2.<CompleteCommand>b__0(Object )
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, Boolean useFastPath, Delegate d, Object[] args)
at System.Windows.Threading.DispatcherSynchronizationContext.Send(SendOrPostCallback d, Object state)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.CompleteCommand(Object sender, AsyncDataCommandCompletedEventArgs`1 e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.AsyncDataCommandBase`2.OnCommandCompleted(Object sender, Exception exception)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataGatewayBase.CompleteAsyncDataCommandWithError(AsyncDataCommand command, Exception exception)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.ProxyExecuteCompletedHandler(Object sender, ExecuteCompletedEventArgs e)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.ProxyDataGateway.<>c__DisplayClass4.<GetClientProxy>b__3(Object sender, ExecuteCompletedEventArgs args)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnExecuteCompleted(Object state)
Any ideas?
- Get on the floor, do that dinosaur

For me I can reach it via the direct server name,
https://Server:444/ServiceHost/Services/DataAccessService.svc works and displays a page
But it fails when trying to go to the load balanced name:
https://SelfService.blah.com:444/ServiceHost/Services/DataAccessService.svc Fails
When I use IE11 and do a network check it shows its getting a 404 error on /ContentHost/ClientBin/ServiceCatalogSilverlightModule.xap.
Network guys who configured the F5 can't see any network issues blocking the request. The F5 isn't doing SSL offloading, certificate is on the software portal server.

HT1695 Cannot connect face-to-face service

Similar Messages

Maybe you are looking for