HT1695 HOW DO I CONNECT AIRPORT EXPRESS?

just bought airport express. how do i set it up? is a router the same as a modem?

A modem provides a single path from your home to your Internet Service Provider (ISP). It has a single Ethernet port. A router plugs into the modem and it has multiple ports (4, 6, 8, depending on the router) AND it has a radio for WiFi. Generally, DSL service includes a "modem-router," a modem with a built-in router while cable service includes only a modem with a modem-router available at extra cost.
My version of Airport Express is one notch older than the latest. It is a router with only a radio. It has Ethernet only to connect to the router but no Ethernet ports for in-home (LAN) devices. The latest version is the same as mine but with one Ethernet port for a LAN device.
Configuration is simple if you start from a factory default condition. Connect the Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations. After confirming that it works, insert your desired administrative and WiFi passwords.

Similar Messages

How do i connect airport express to blue ray player

wondering if i can connect airport express to blue ray player using usb for streaming, etc?

Good question. The single port on the AirPort Express places it somewhat at a disadvantage in a situation like this. It's tempting to think that a setup like this will work:
Modem > Ethernet Switch > Express & Blu-Ray Player both connected to the switch
But, unfortunately, it won't. The reason is that the modem has only one IP address it can deliver and it can't go to two devices at the same time. It will be matter of chance as to which device...the Express or Blu-Ray Player....gets the IP address. The other device will not be able to connect to the Internet.
Instead, what is required is a simple "wired only" router connected to the modem. So the corrrect setup will look like this:
Modem > Wired Only Router > Express and Blu-Ray Player both connected to the router
The router "shares" the IP address that it receives from the modem (an ethernet switch cannot do this) and provides simultaneous Internet connections to the devices that are plugged into the ethernet ports on the router.

How can I connect airport express to an external dac connected to stereo amp, How can I connect airport express to an external dac connected to stereo amp

Hi just purchased airport express, how do I connect it an external dac which is connected to a stereo amplifier, what interconnect cables should I be using"" thanks

Normally, you would need a Mini Toslink to Toslink cable. Example below:
Amazon.com: 6ft Toslink to Mini Toslink Cable: Computers ...
Most electronic superstores will have what you need as well.

How to Connect Airport Express to Existing Wireless Network (Client Mode)

I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save someone else the agony we went through.
So here's the situation:
Say you already have your own home network set up, and all you want is to be able to use AirTunes to play music off iTunes into your speaker system. And, you don't need the printer sharing capability nor creation of another wireless network (2 of the features of Airport Express). Then this solution is for you - read on.
Unfortunately, Apple's user manual is very unclear how to connect Airport Express to your own network. When you look at the picture diagram they provide, they show Airport Express picking up its signal from another Apple-oriented base. This can make you think you need to buy another piece of hardware to make it work. DON'T If you read through the manual, the Support section here, etc., you will hear lots of talk about "Client Mode" - and that this is the only way to get it to work. Nice - but no one really tells you how to set up the Airport in client mode.
Do yourself a favor, toss that user manual aside and run these steps.
(Note: These directions assume your DSL/Cable Modem is hooked up to a wireless router or acts as its own wireless router)
1. Get a cat5 Ethernet cable (anything but an orange cable - that's a crossover cable) like you would use to connect your PC to your router to pick up the Internet.
2. Connect the Ethernet cable to the router on one end, and to the Airport Express unit on the other end.
3. Plug in your Airport Express unit to the wall (this will not necessarily become its permanent location - you will be able to move it later). The light will glow solid Amber for about 30-45 seconds while it starts up, then blink Amber. At this point, the unit is ready to operate.
4. Install the CD to the PC where your iTunes music is stored. This should be painless. Once you open the program, it should detect the Airport unit.
5. At this point, the on-screen wizard will present you with your options, and walk you through the setup. This is much like the user manual describes - and you should be good to go form here forward.
Some pointers:
- When asked if you want to create a new network, join an existing network, or connect via Ethernet, choose the middle option for joining an existing network. You will need to know the name of your network, the password to connect to the network (if present), and the type of encryption used on the network (e.g. WEP, WPA, etc.). Side note, WPA is recommended, as it is a higher level of security than WEP. You will be able to configure the Airport Express unit to automatically login to your network.
- I would recommend, when creating a password for the Airport Express unit, use the same password as your network, to avoid confusion.
6. The very last step will ask you to save the settings to the Airport Express. Here's the kicker - when you save the settings, you are TRICKING the Airport Express into no longer acting as a network broadcaster, but instead being a "slave" to your own network. What do I mean? You will lose the connection from your PC to the Airport Express - an error message will pop up telling you the unit can no longer be found. While you might think you did something wrong, you actually were successful!
7. Unplug your Airport Express, and disconnect the Ethernet cable from your router and the Airport unit. This will no longer be needed.
8. Go to your desired location where you want to plug in your Airport Express unit. Before plugging it in, connect your Audio cable from the Airport Express to your audio receiver. Once that is connected, then plug in the Airport Express unit. The light will glow solid Amber for 30-45 seconds while it loads, and then will blink Amber for a brief period of time before turning solid GREEN. When this happens, you have successfully connected the Airport Express to your home network!
9. Go back to your PC with iTunes. Open the Airport software - you should now have a listing for your Airport Express unit in the upper left. Click on this, and the wizard will guide you through connecting - you will need the password you created for the unit. You only need to go through this wizard once, and when finished, the software will tell you that can now use iTunes with your Airport unit.
10. Open iTunes. On the lower right, you will see a dropdown for Speakers, and it should be defaulted to My Computer. Click on that drop-down, and you will see the name of your Airport unit. Click on that name, and now your music will broadcast to the Airport unit!
11. Play a song in iTunes. Go to your audio receiver, and connect it to the channel for your external connection to the Airport Express unit. You should hear your music from iTunes. CONGRATULATIONS! =)
I hope these instructions were helpful - I am happy to answer any questions, so feel free to contact me, *******************@*****.**.
<Edited by Moderator>

Thanks for the detailed directions. You are absolutely correct in stating that people should toss the user manual; it's pretty worthless. I have had a problem setting up my new Airport Express as I have described in an earlier post - http://discussions.apple.com/thread.jspa?threadID=1839873&tstart=45
One quick question - does using your setup process set the AE up as part of a distributed network where the AE is acting as a wireless router where it is extending the range of your network? Or, is it simply a wireless connection to your stereo for iTunes? I am interested in having both, since my AE will be at the other end of the house from the main wireless router.
Thanks

How can I use AirPort Express when traveling?

How can I use AirPort Express when traveling?

How can I use AirPort Express when traveling?
Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
If the hotel only provides wireless service, then a single AirPort Express will not help you.
However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

Connect AirPort Express

Hello everyone, New here.... I hope someone might help me.
I wanted to connect my Airport Express to my network, but I am not getting anywhere. I plug in the device,and the unit shows a solid amber light for a while, then it goes blinking amber. I open the AirPort utility program, and except for "Open Configuration file", "Configure Other", "Rescan"', "Preferences" and "Check for Updates", everything else is grayed out. When I click on the "Rescan" button, the program tells me that it was unable to find any AirPort wireless device. I do not know what else to try.
Any help would be greatly appreciated.
Brutium

I have a question how come the $400 Airport Express Time Capsule will not connect threw my Dual Band N adapters to my Panasonic TV? Yet my old NetGear router will through the Ethernet port on the TV without a problem, giving me the Internet for Movies ETC. I have a brand new $3000 IMac as well.
What is the trick? My wife spent all this money on these new Apple Products for me at Christmas!!
What do I need to do?

How good is the Airport Express inbuilt Digital to Analogue converter?

How good is the Airport Express inbuilt Digital to Analogue converter?
I have just purchased a 2012 dual band Airport Express which has the combined optical/3.5mm analogue jack audio output.
This is to connect to my hifi seperate amplifier, which does not have an optical input.
This gives me a couple of options
a) just use a standard 3.5mm jack to phono cable (and use the built in DAC in the airpor express)
or
b) purchase a seperate DAC to convert the optical from the Express into phono and connect that to the amplifier
I will be sending 250-320kbps music to the airport express wirelessly.
Will I see much/any benefit in sound quality with option B vs option A?
I ask because option A is free (I already have the cable) and option B will be around £20-£30 depending on which DAC I were to buy (I would also need a new TOSlink optical cable).
These are the sort of DACs I was looking at.
Thanks, Chipstix

How good is the Airport Express inbuilt Digital to Analogue converter?
Please check out this stereophile article on the earlier AirPort Express. I understand that the newest version may use basically similar audio hardware.
I will be sending 250-320kbps music to the airport express wirelessly.
The AirPort Express Base Station (AX) works only with iTunes v4.6+ and is limited to music files that iTunes can read; ie, 16-bit data only. (An exception is you can use a third-party product like Rogue Amoeba's AirFoil to stream other non-iTunes sources.) These data, though, can be in any file format that iTunes recognizes, from lossy MP3s at the low-quality end of the spectrum to Apple Lossless and lossless AIF or WAV files at the high end. It is also important to note that the AX functions only at a 44.1kHz sample rate. When you play 32kHz or 48kHz data, iTunes sample-rate-converts the data in real time before sending it to the AX.
iTunes uses a QuickTime CODEC to convert audio files to Apple Lossless, and then, uses AirPlay to send them to the AX. In turn, the AX uses built-in software that converts the Apple Lossless to an Encoded Digital Audio format. From there, digital audio is sent to a optical transceiver to convert the electrical signal to an optical one before sending it to the innermost part of the audio port. As you already know for analog, the AX has a built-in DAC to convert the Encoded Digital Audio to Analog which is sent to the same audio port.
One operational glitch is the fact that, as the AX doesn't have a local clock circuit, when the incoming data is interrupted, as it is when you change songs in iTunes, there is no longer a digital output to feed the DAC, which loses lock as a result. Using an external DAC, which may offer better audio performance, may have issues with this glitch. Some DACs are more sensitive than others.

How do I setup airport express to extend my airport extreme

How do I setup airport express to extend the airport extreme

Unfortunately, you are getting incorrect advice here. Might be a good idea to start a new post, since the original thread is long out of date.
First, please confirm that you have a compatible Express with the AirPort Extreme. This would be either the current A1392 version.....or the previous A1264 version.
Next, we need to confirm "how' you want to extend, since you do not mention this in your post.
Are you planning to "extend" by connecting the AirPort Express to the AirPort Extreme using a permanent, wired Ethernet connection (highly recommended).....or.....are you trying to "extend" by having the Express try to connect wirelessly to the AirPort Extreme?

Hi. Does anyone know how to extend the airport express and extreme with Cisco Router DPC3925. I have upgrade my wireless to 50Mbps. Thank you

Hi,
Can someone help.
I have a Cisco router DPC3925 provided by the ISP and I cannot extend my wireless with Airport Express.
Also I intend to extend it with Airport Extreme.
Please help.
Thank you.

Sorry, but your post is not clear. The topic of this thread is how to extend an AirPort Express or AirPort Extreme with a Cisco router.
This would mean that the main router was an AirPort device and the Cisco would be extending the existing network provided by the AirPort.
Is that really what you want to do?
If not, then it sounds like your Cisco ISP provided wireless router is your "main" router and you will be using the Time Capsule to extend the network.
Please start another post to tell us exactly.......
What device will be the main router providing your Internet connection and wireless network
What device will extend the network
What operating system that you have on your Mac or PC

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

How to set up Airport Express in Bridge mode for hotel use

Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

+"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
http://support.apple.com/downloads/#airport

How can i install airport express A 1264 on os x 10.9.2

How can i install Airport Express A 1264 on os x 10.9.2

Hello chawich
All you should need is Airport Utility that is located in the Utilities folder that sits in the Application folder. If you have an iOS device, you can also set it up with that device with Airport Utility or in Wi-Fi section in Settings.
AirPort Utility software and firmware downloads
https://support.apple.com/kb/HT1998
Regards,
-Norm G.

HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

How can I use Airport Express (1st Generation) with OS X Mavericks?

1st Generation AirPort Express will work fine with Mavericks.
Are you sure that you have a 1st Gen Express?
Check the model number on the side of the Express. 1st Gen is A1264.
If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

When trying to connect airport express keep getting unexpected error please try again. IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

when trying to connect airport express keep getting unexpected error please try again. IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

Have you tried using a WEP password for your wireless network instead of a WPA one? That fixed it for me.

How do I connect Airport Extreme in place of Buffalo wireless router in Japan?

How do I connect Airport Extreme to replace current Buffalo wireless router? ISP is StarCat in Japan.

Hello DM1960,
Thanks for using Apple Support Communities.
To set up and configure your AirPort Extreme please follow the steps in the article below:
OS X Mavericks: Set up an Apple wireless device
http://support.apple.com/kb/PH14058
Take care,
Alex H.

HT1695 HOW DO I CONNECT AIRPORT EXPRESS?

Similar Messages

Maybe you are looking for