HT1695 how to choose which app to connect?

Hello,
While using cellular data, I don't want all apps that sync online to automatically sync... what shall I do?
Regards

I would keep the larger as long as storage space wasn't an issue and if it was I'd look at increasing storage before deleting the larger file.
Think of it this way the larger files contains more data, more data means not only a better image (even if you cannot see a difference on the monitor) but also more options when you go to edit the image.
Cropping is just one obvious example.  A larger file will give you more options when it comes to cropping the image. 
You can always create the smaller from the larger, you can;t go the other way. Once you delete the larger file the data is lost for good.

Similar Messages

  • How to choose which one to use when using handoff if one has more than one phone with different network

    I am using 2 iPhone with 2 different network. How to choose which phone to use when making a call.

    Are you confirming your POP account is selected as the sending email account before the message is sent?
    And regardless if the email is a new email or is replying to or forwarding an email received by the POP account and cofirming the POP acconut is selected as the sending email account, the message is sent by the Gmail account?
    All message sent by the POP account are sent by the Gmail account?
    If so, delete the Gmail account from your iPad and test if a message sent with your POP account which will be the only email account available with the iPad's Mail app is recieved from your POP account/address.
    If not, something else is wrong or on play that has nothing to do with the iPad.

  • HT4597 Can I just choose which apps or photos to sync via iCloud since I don't want all of them in all my devices?  I have all photos & apps in my iMac but only sync manually some of them to my iPad and to my iPhone. Can I still do this with iCloud?

    I have 3 Apple devices - iMac, iPhone, and iPad.  I am planning to move to iCloud from MobileMe.  In iTunes, I just choose to sync whatever files I want my iPhone and iPad to have since they don't have sufficient disk space as my iMac. 
    Can I just choose which apps or photos to sync via iCloud since I don't want all of them in my iPhone and iPad?  I have all photos & apps in my iMac but only sync manually some of them to my iPad and to my iPhone. Can I still do this with iCloud?
    Calendars, emails, contacts, are fine since files are small.  What I'm afraid of are the apps and photos.
    Any reply will be appreciated.
    Thanks.

    With the exception of photo stream, iCloud doesn't sync your apps or photos between devices. You will continue to sync this content via iTunes in the same way as you do now.
    Photo stream allows you to sync your most recent photos between all devices, you have the option to use photostream or not.

  • How to choose which Aperture duplicate photo to keep

    I use Aperture 3.4.5 on an iMac with OS 10.8.4 and, like many others who have written to this community, I have acquired lots of duplicates because some years ago I  moved from iPhoto to Aperture. Those collections are mostly referenced in their original collections. I quite understand how these duplicates came to be.  Using Duplicate Annihilator - Aperture  I have found a great many (4 thousand) pairs of duplicate pictures out of a library of 60 thousand, and as  has been explained by several responders, usually one is called iPhoto Original and the other iPhoto Externally Edited or iPhoto Edited.  I have never knowingly used an external editor, but I do understand that, in iPhoto, just rotating the photo from portrait to landscape will create a copy, something that does not happen with Aperture.  So that is why the dupliocates exist. My question is basically, now that I have found them, how to choose which one of the two versions to keep, because there seems no reason to keep these duplicates.
    Obviously if I have made noticeable changes, or added many key words,  then I want to keep that one. The duplicates in question are in  two-photo Stacks. The original will have  a size of 3 MB or 4Mb and the copy will have a smaller size, maybe  as little as 1.5 or 2 MB.  Sometimes the copy has just been rotated (and the file size is made smaller). With Aperture I can rotate the original iPhoto picture and maintain the larger size. Sometimes (but not always) there is a name change from xxxx to xxxx.jpg.  But even without a name change, the edited or rotated file is smaller.  I have examined the two images at high resolution, in Aperture, and I cannot see any difference, though they have very different sizes.  This surprised me; there seems no benefit from the larger size, though there is a slight shift of the histogram of colors. (I do not plan to print any of these at high resolution, just show them on the iMac or a video.)
    So my question is: is it desirable to keep the larger original file, though I do not see a difference in the image on my 27in iMac? I have many of these duplicates to choose between, and I would like to understand the consequences of my choice before I delete things. 

    I would keep the larger as long as storage space wasn't an issue and if it was I'd look at increasing storage before deleting the larger file.
    Think of it this way the larger files contains more data, more data means not only a better image (even if you cannot see a difference on the monitor) but also more options when you go to edit the image.
    Cropping is just one obvious example.  A larger file will give you more options when it comes to cropping the image. 
    You can always create the smaller from the larger, you can;t go the other way. Once you delete the larger file the data is lost for good.

  • Can I choose which apps to share?

    I Have set up family sharing with my wife and kids. Is there a way that I can limit specific apps that I share with my son? I want my wife to be able to access all of my apps, but I would like to be able to specifically choose which app purchases I share with my son.

    You can hide purchased as explained here: iTunes Store: Hiding and unhiding purchases, but then your wife would lose access to them too.  In your case, the only way to restrict content that others in the family can access is by setting restrictions on his device in Settings>General>Restrictions, which allows a limited set of restrictions such as movie and TV show ratings, explicit book content, app ratings, etc.

  • How to set which app is controlled by hands-free device?

    I have a Kinivo BTC450 hands-free bluetooth device in my car. With my iPhone 5 and iOS 7, it worked perfectly: the one button on the Kinivo started or paused my SpeedUp app (which plays audio content faster than normal), and when I got back in the car, it would automatically start up again.  With updates to iOS 8, it's now much more flaky (and same with my new iPhone 6+): sometimes the button turns on iTunes instead, and sometimes it turns on audio from some app I can't even identify (none appear to be running on the phone!). Sometimes pushing the button does not start or pause the audio, and it never starts up again now, when I start the car. Does anyone have any suggestions for how to
    1) tell the phone which app the bluetooth device is supposed to control
    2) make it more reliable
         or perhaps suggest a better similar device (BT, with output audio jack for my stereo's AUX input socket) which is more reliable with iPhone?

    Hi Michael,
    It sounds like you’re running into intermittent Bluetooth connection issues and other unexpected Bluetooth behavior since upgrading iOS on your iPhone 5. I suggest taking a look at the article linked below, it provides a lot of great troubleshooting tips that’ll resolve most Bluetooth connection issues.
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Take care,
    -Jason

  • How to identify which server are connected in a switch?

    Hi,
    Many servers are connected to a switch?
    How to identify what server are connected to which port remotely?
    Thanks!
    Samuel

    Hi Sam,
    just issue the command show ip arp , it will display some thing like this for know the MAC address & the VLAN number.
    Protocol Address Age (min) Hardware Addr Type Interface
    Internet 10.2.1.18 9 0800.6913.710e ARPA Vlan2
    to know on which port it is connected, just issue the command as mentioned below
    sh mac-address-table address 0800.6913.710e
    Mac Address Table
    Vlan Mac Address Type Ports
    2 0800.6913.710e DYNAMIC Po1
    hpe this will help you to identify your servers.
    rate this post.

  • How to choose which playlists goes onto ipod

    I want to put songs onto my ipod but not my "music" playlist, I have a playlist that I want put onto my ipod but just not all my music, does anyone know how I can choose which playlist gets put onto my ipod? Thanks

    Welcome to AD!
    It's simple, but you have to have "manually managed music" unchecked in the ipod summary tab.
    Once that is unchecked, you can go to teh iPod's music tab and check the option to "Only sync these playslists".

  • How to choose which is default?

    i am using iSync 2.3
    how can i choose (in case of conflict) which device should be default? (my mobile or my address book).

    You cannot predetermine which conflicting records will be retained and which will be tossed in the event of a conflict. The Conflict Manager will display both records side by side whenever there is a conflict that cannot be resolved by the Sync Engine, and ask you to choose which one to retain on a case by case basis.
    You can instruct the Conflict Manager to handle any remaining similar records in the same manner, but you cannot review those records and must trust that they are indeed similar without being able to see any evidence that they are.

  • How to check which app is using my network, how to check which app is using my network

    I find my net very slow on my mac. so when i open the activity monitor i find network being used but no app seemes to be open which is using the net. so how do i check which app is using the network?

    Download Little Snitch 

  • Is there a way to migrate info from one mac to another and still be able to choose which apps you want taken?

    I have an IMAC and I want to transfer some of my applications to my newly referbished Mac Book Pro.  The problem is that when I use Migration Assistant, I am unable to choose which applications I want to migrate, the Mac Book is unable to migrate the entire library, due to the size of its hard drive.  I hope there is a way do this.  Help, Please!

    Try Target Disk Mode:
    http://support.apple.com/kb/HT1661
    Ciao.
    You may also look at this from the Pondini website:
    http://pondini.org/OSX/Setup.html
    Message was edited by: OGELTHORPE

  • How to choose request in transport connection?

    Hi all,
    I need your help. How can I to choose in which request I will include objects in transport connection?
    Thanks,

    We have two types of requests for BW objects..
    1. Customizing Request
    2. Workbench Request
    and another One for Bex objects
    Depends on the object type the corresponding requests are assigned.
    ie During activation on prompting screen when you click creation buttion or assignment only corresponding request type will be created/displayed depends on object type.
    In other way if you do it from RSA1-> Transport connection, it will allow you to assign only in the right request type with respect to object type else system through you a error with analogous message.
    You can create request by different way.
    Type 1. During object creation/activation, in prompt you can create a new request else you can assign in existing request.
    If you are not getting the prompt during activation then reason is two..
    a) Object is in $TMP development class where transport is not possible.
    Here go to menupath Extras->Object directory entry->select object..(Assign in appropriate package/development class)
    b) Object is already in the request, from se09 you can find the request where object is locked
    Type 2. Creation of request from SEO9.
    Go to SE09, Select appropriate request type radio button and click ok.
    You can directly add the object inside the request if you know the object type and other required details.
    Even here you can move the objects from particular request to another request by clicking on option"Include object"
    Type 3. Creation and assignment of object from RSA1
    From RSA1-> Go to tab Transport connection.
    Collect all your required object similar to business content installation.
    Click on truck button you will get a prompt where depends on the situation you have to create/assigne development class and create/assign requests.

  • How to tell which app on N85 held up the connectio...

    There are time the network connection indicator shows up no matter GPRS or 3G for no appearent reason, my phone drain battery quick especially when it is on 3G, but it seems no way to tell exactly what app is using the connection, or I can deal with it.

    Thanks for the response kps.
    looks like you may want to use JButton<<I had tried JLabel and JButton but neither had a solution. I now know to use getSource which works
    You are creating so many listener classes...whereas you need to have only one class and use the same object to register for all JButtons...<<Someone else has made the same point. I think I know what you mean by this, but am not sure how to implement.
    Thanks
    Mark

  • TS3376 How to choose which device to find?

    I have años ipad2, two iPhone all under same account.  One iPhone is loose how can i choose that device and find It?

    Welcome to the Apple community.
    None of those devices can be the "major". The master data is that which is held in the cloud, all the other devices merely sync with that.

  • How to choose which version to download??

    I am trying to pick which version to download from home. The operating system I am using is Windows XP, so should I download Oracle9i Database Release 2 Client for Microsoft Windows 98/2000/NT/XP or Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP?? Thanks!

    Client is only used to connect to a database on another machine. If you want a database on your computer, choose Personal Oracle.

Maybe you are looking for

  • Can I change book size after its designed?

    I just spent hours getting my book just the way I want it but now realize I'd rather buy the larger size book than the smaller one I selected at the start of the project. Can I change the book size now before I purchase?

  • Numbers 09 (Rel. 2.1(436)) extremely slow under Lion

    I just gave Numbers a try with a relatively low complex mortgage calculation - 13 columns, 200 rows - simple formulas (if ... then ... else, difference in dates, simple multiplications). Numbers is extremely slow - whenever something is changed in th

  • Confused about testing/firefox dependencies [SOLVED]

    In trying to install firefox-3.6.2 from testing, I get a message saying that there's a dependency conflict with fontconfig-ubuntu, which I installed some time ago in an attempt to improve my screen fonts. When i check the explicit dependencies for fi

  • Datawarehouse Admin Console : Reading column failed

    While importing column from Database (MSSQL) into Datawarehouse Admin Console i am getting below error. Reading Columns failed com.siebel.analytics.etl.schema.reader.SchemaReaderException: Error while initializing the list of tables. Help me to resol

  • Advanced Search Capabilities in the Wiki

    Hello all, Is it possible to limit Wiki searches to a single page in the Wiki. For example if I have Wiki named Food with a page named Fruit and I conduct a search for Apples I only what to identify any hits on Apples on the Fruit page not the entire