HT1695 how to install sim card

How do I install my sim card

This is covered in the manual
iPhone User Guide (For iOS 6.1 Software)

Similar Messages

  • How to install sim card

    How do I install sim card in my iphone.  I took it out to clean and dont remembeer its placement on the sim card slide

  • How to install sim card in iphone

    Unbelievable!! All I want to know is how to open the darn phone to change my sim card!!!! Can't find that anywhere!! We are not all 18 year old geeks who know these things from birth!!!  Can't find the info anywhere!

    http://m.youtube.com/#/watch?v=cjQ6O4R11AQ&desktop_uri=%2Fwatch%3Fv%3DcjQ6O4R11A Q

  • How to insert sim card in ipad air

    how to insert sim card in ipad air

    You should be able to use the sim eject tool (or something like a bent paperclip if you don't have it) to remove the sim card holder from its slot on its left-hand side so that you can inser the nano sim card into it 

  • How to install lan card in solaris 11

    Hi,
    can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
    When i do ifconfig -a it only displays loop back driver only
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    The other driver was missing can please some one tell me how to install that?

    Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
    http://www.oracle.com/webfolder/technetwork/hcl/index.html
    There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work.

  • HT4157 How does the sim card work

    how does the sim card work? I have first gen. ipad 3g att

    U have to get a sim card from a phone company that suits your phone generally they will offer. U a plan which can expire over a term ie.monthly yearly u get to choose, the sim card is inserted on the side of the iPad u can use your iPad anywhere there is cellphone coverage.

  • How to get sim cards changed for older iphone

    I want to give my iphone 4 to my daughter and get an older version iphone. Sim cards are different. how to transfer sim cards ?
    Thanks

    Talk to your carrier.

  • HT1937 I have already unlock iphone4 from the apple website but when I install SIM card than no service display

    My brother send iPhone from USA to India
    iPhone 4 already unlocked from the apple website
    Not  using jailbreak system
    But when I install SIM card it displays no service
    What I have to do for this solution

    Gauravpatel00045 wrote:
    My brother send iPhone from USA to India
    iPhone 4 already unlocked from the apple website
    ONLY the Carrier that the Phone is locked to can Unlock it.
    Gauravpatel00045 wrote:
    ... when I install SIM card it displays no service
    What I have to do for this solution
    Please see the More Like This section on the right.

  • Does Verizon's iPhone 5 have pre-installed SIM cards or have SIM card slots?

    Does Verizon's iPhone 5 have pre-installed SIM cards or have SIM card slots?

    Does Verizon's iPhone 5 have pre-installed SIM cards or have SIM card slots?

  • HT4972 my iphone is not installed sim card.so I can't update my iphone.

    my iphone is not installed sim card.so I can't update my iphone.

    That's correct, without a supported SIM card you can't set up the phone.
    If your carrier supports unlocking, you can use any SIM after your phone has been unlocked by the provider:
    iPhone: Wireless carrier support and features
    iPhone: About unlocking
    Follow the instructions in this article to unlock your iPhone for use with different carriers.
    Follow these instructions to initiate the unlocking process for your iPhone:
    Check if your carrier offers unlocking. Only your carrier can unlock your iPhone.
    Contact your carrier and request an unlock.You may need to meet certain requirements to qualify for unlocking. After your carrier submits the unlocking request, it may take up to seven days.
    Once you receive confirmation from your carrier that your iPhone unlock has been processed, proceed to the next section.
    If you have a SIM card from a carrier that is different from your current carrier, and you've received confirmation from your current carrier that your iPhone is unlocked, follow these steps:
    Eject your SIM card and insert the new SIM card.
    Complete the setup process.
    If you do not currently have another SIM card you can use, follow these steps to complete the process:
    Back up your iPhone.
    Erase your iPhone.
    Complete the setup assistant and restore your backup.
    Additional Information
    If you experience issues or receive the following error message displayed in iTunes or on your device, follow the steps below:"The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier store."
    Restore your iPhone.
    Contact your carrier to verify that the unlock was applied in your carrier's system.

  • Can Siri work with only wifi without installing SIM card in it?

    Can Siri work with only WiFi without installing SIM card in the iPhone 4S?

    I am seeking to use the siri from my newly bought iPhone from USA where i am staying here for vacation around 2 months . I will be installing the SIM card not in USA , where iwill be back home 2 months from now. Can it work with only wifi on it

  • How to unlock sim card, how to unlock sim card

    w t how to unlock sim card, how to unlock sim card

    SIM cards are not locked, unless you have a lock put on it from the carrier. Maybe you are referring to unlocking the phone to use a different carrier? Please explain better.

  • I have installed sim card but while settinng up ios 5 when i chose connect to itunes after some time it shows no sim card installed

    i have installed sim card but while settinng up ios 5.1 when i chose connect to itunes after some time it shows no sim card installed

    qaziahmad2010 wrote:
    i have iphone 3gs i restored it and now it is not activating ...
    See here  >  http://support.apple.com/kb/TS3424
    Also see this discussion.
    https://discussions.apple.com/message/21189708

  • How to use SIM card slot on W500

    I found there is a slot for SIM card when I pull the battery out. I insert my SIM card and start the computer, however it won't recognize. I download and install Mobile Connect software, I got "no device found" message. How to use this function?

    Hello LeadOrg:
    Thanks for that reply.
    What confuses me is this:  There seems to be two or maybe three different cards available, as follows:
    Vodafone and AT&T - HSDPA wireless WAN, which seems to address the following two items:
      - Ericsson HSDPA Wireless WAN Adapter
      - Qualcomm UNDP Wireless WAN Adapter
    Verizon Wireless WAN (UNDP), which seems to address the following one item: 
       - Qualcomm HS-USB
    I can't find any specifications in the Lenovo literature that clarifies which of the above items are suitable for GSM-900 and GSM-1800 (the frequencies used in Europe) and which of these items are suitable for GSM-850 and GSM-1900 (the frequencies used i Oz, USA, and Canada).
    Further, Lenovo seems to be linking these two products to specific carriers (Vodafone and AT&T in one case, Verizon in the other case), and I use neither one of these companies - they don't operate in Canada.  I use Rogers GSM when I am in Canada and Swisscom GSM when I am in Europe.
    I am quite confused.  I'd like to get a card that works with the two above carriers - but I don't know how to go about the process of selecting the appropriate card.  The whole HSDPA, HS-USB and UNDP business totally confuses me.  I always thought that UNDP was the United Nations Development Program... 
    Michael
    W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

  • How to install SIM on ipad mini with celluna?

    i biought the t-mobil SIM start kid and do not know how to install it on my ipad mini with celluna; can some one help?

    You'll need to open the sim slot as shown in Diavonex's, image.  However looking into the t-Mobile Starter kit here:
    http://www.t-mobile.com/cell-phones/t-mobile-sim-starter-kit.html
    It seems it comes with a standard Mini sim which will be too large to fit in any iPad model.  Depending on the Model of iPad they use either a Micro Sim or a  Nano Sim.
    You''ll likely have to get the sim card cut to the appropriate size.

Maybe you are looking for

  • Image Quality In Crystal Reports for Visual Studio 2010

    I am using the new production release of Crystal Reports for Visual Studio 2010 and I am having an issue with image quality when adding an image to a crystal report. The image itself is a .TIF file,  and when opened in Windows, the quality of the ima

  • Dynamic Min Max values of Axis

    Hi Everybody, Just wanna know if there is any possibility to assign dynamically min-max values of Y axis in line chart of  Crystal Reports 2008 using formulas or parametesr or any other idea?? Your suggestions are welcomed. Thanks Regards, Atul

  • How to make plsql parser around java method

    can someone tell me how can i move Jdeveloper java method into oracle DB (how to make plsql parser around java method). Is this possible becouse in google i can not find any good example how to make this.

  • Using gifs in motion

    I have imported a few gifs into motion but when I place it and hit play there is no motion. How can I make the frames play from the gif to animate when i hit play? Thanks, jefre

  • Segment E1RSHND does not occur at the current level of thecustom basic type

    Hello Friends, This is the error iam getting in RSA1 for Heirarichal orgunit: So data load is failing. EDI: Syntax error in IDoc (segment cannot be identified) Message no. E0078 Diagnosis The segment E1RSHND does not occur at the current level of the