HT1695 I am unable to connect to my wi fi because the password is 2 characters to short

I am unable to turn on wi fi at home because the password for the router is not long enough.

You should call Qtel technical support and ask for help.
Where did you get the password that you are trying? What does it look like? (Length, type of characters)
Do you know what type of security is being used? WEP, WPA, WPA2

Similar Messages

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELP

I would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My ipad wont accept any passwords, i am unable to connect to my wifi even though my password is correct and other laptops etc have no problem connecting.

my ipad wont accept any passwords, i am unable to connect to my wifi even though my password is correct and other laptops etc have no problem connecting.
The ipad can find my wifi connection but just wont accept the password. connected with no problem in the Apple store.
any suggestions,
thanks.

Does the iPad connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

"Unable to connect to iTunes Store" 90% of the time

I have a 3rd Gen iPad with wifi only that I bought about 40 days ago. Initially I had no problem downloading and updating apps but in the past few weeks I get "unable to connect to iTunes Store" over 90% of the time. I always verfity the Internet connection is good and I've tried on my home wifi, my cellphone's mobile hotspot, and several hotel wifi connections. The other day I went into settings and noticed the Security code for my Credit Card was blank so I filled it in and clicked "done". Unable to connect so I checked back and the code was still blank. I deleted and redid my CC info and messed with some other settings and iTunes finally let me update some apps. Now I'm back home and it's giving me the error message again. I'm wondering if this is a known issue or if there's a fix for it.

Usually it's because you are not connecting to the internet via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Unable to connect to Oracle Applications database invalid username/password

Hi,
Ou Requirement is we want to connect to Oracle Applications using discoverer plus and discoverer viewer.
Application Server used : 10.1.2.0.2
Oracle Applications : R12 RUP4
We have installed application server 10g with OID and when we try to connect to oracle applications we are getting
A connection error has occurred.
- Failed to connect to database - Unable to connect to Oracle Applications database: invalid username/password.
Regards
Ketan

Hi,
I think better to check with your sysadmin or DBA on this, I had the same isuse before but Apps 11i with Discoverer, I talked to ERP sysadmin and worked fine.
Since applications userid cannot talk with Discoverer schema (eul10_us) and it should directly talk with APPS user and then APPS user can talk with Discoverer user.
To the best of my knowledge I provided.
--skat

I have my wifi in my home with secure connection when i get connected to it ,it asks me the password and when i entered it, it shows that unable to join the network why is this happening...........

i have my wifi in my home with secure connection when i get connected to it ,it asks me the password and when i entered it, it shows that unable to join the network why is this happening...........

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

I am unable to connect my new LaserJet CP1525nw to the wireless

I already have 2 other HP printers and I only had to type the IP info and they are connected.
my IPs are wierd, my printer and computer IPs are xxx.xxx.1.xx and my Gateway IP is xxx.xxx.0.1 and now when I try to enter these info on the printer it would not accept because they don't match, and when I enter xxx.xxx.0.xx to match the gateway, would not connect because the password is not recognised.
I also connected by network cable to the router to get it connected but will not connect.
I spent 3 hours with HP tech. in India in the morning and 2 hours with another tech. in the afternoon and no luck.

There are various ways to add a laserjet to a network.
What brand and model is the wireless router?
What operating system does the computer use (preferably one that is on the same wireless network the printer is intended for)?
Does your network use a DHCP server (most home routers have this enabled by default)? If so, is there any reason you want to use a static IP address over DHCP for your network?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

TS3304 I have an Ipad1 and an Ipad2. The Ipad1 cannot connect to my wifi and indicates the password is incorrect even though I am using the same password??

I have an Ipad1 and an Ipad2. The Ipad1 cannot connect to my wifi and indicates the password is incorrect even though I am using the same password for the Ipad2??

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Im trying to connect my ipad to my connection at home and its taking the password but still wont connect and doesnt tell me why.i even tried to reset network settings

im trying to connect my ipad to my connection at home and its taking the password but still wont connect and doesnt tell me why?? .i even tried to reset network settings

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, my guess is that it's a router issue. You'll need to get administrative access to the router and determine if it has a firewall. If one is present, turn it off and test the iPad. If that solves the problem, don't leave it that way. Turn the firewall back on but weaken it a notch and test again. Repeat as required.
For what it's worth, a router firewall can stop iPad communication without affecting computer communication. I do not understand why the difference.
Edit...
I just saw the post from Diavonex. An off/on is certainly worth a shot. Leave it off for ten seconds.

My Apple TV recognises my wifi network but will not connect to it, when I enter the password

Help please - my Apple TV recognises my wifi network but will not connect to it, when I enter the password - it just says 'there was a problem connecting to the network - check your settings and try again (5).' What should I do next?

people repport that apple products in general I believe have problems with support for the outdated encryption type called wep encryption which is also pretty useless and easy to break
if you use that try disabling it or changing to wpa encryption
if you use MAC address filtering in your router then you need to add the appletv's MAC address to the positive list

Connection for Source DataConnection failed because the enviroment is not trusted

Keep getting the error "Connection for Source DataConnection failed because the enviroment is not trusted. I have searched the internet and have not found a solution to this problem. Anyone know a way around this? Trying to connect a live cycle form and an Access database....I am at the end of my rope here...
TIA@

There are browser settings that control whether you allow getting data from other sources (than where the current page is loaded). In preview you are loading the PDF in an browser ActiveX control so that is why this is coming up. You may also have to add the other server name to your trusted site list in the browser.

HT4111 while using my aftermarket (Brookstone) IPAD 2 key board the circular search icon never stops moving (setting tab, "Bluetooth" connect)...is that because the Bluetooth is always in the "search" mode while the keypad is in use?

while using my aftermarket (Brookstone) IPAD 2 key board the circular search icon never stops moving (setting tab, "Bluetooth" connect)...is that because the Bluetooth is always in the "search" mode while the keypad is in use?

This is the same experience I see with both my iPad and iPhone. Doesn't seem to cause battery drain, so I just don't worry about it. My bluetooth devices work and if yours do as well, just don't worry about it.

My wifi usually automatically hooks up my other home's wifi, but i went away for a while and it hasnt connected so i tried to put the password in again, and it said it was connected but then it just lets it go. And it is refusing to work.

My wifi usually automatically hooks up my other home's wifi, but i went away for a while and it hasnt connected so i tried to put the password in again, and it said it was connected but then it just lets it go. And it is refusing to work.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

I am getting an unable to connect error messagen when I start the browser. The setting is set to "no proxy" and my internet connection is working fine. What can I do to fix this?

I opened up my firefox browser yesterday and it crashed. Since then I get an error message that says "unable to connect" every time I try to load the browser. The setting is set to "no proxy" So it should be connecting. My internet explorer browser is working fine. So I know it is not my internet connection. What can I do to make the firefox browser work again?

Hi,
Maybe the radio connection on the other end is not working. Hope this helps.
xxmitchxx90

HT1695 I am unable to connect to my wi fi because the password is 2 characters to short

Similar Messages

Maybe you are looking for