HT1695 I can't connect to my wifi network not even when it has no security on I get "unable to connect to network "netgear" anyone have this issue and maybe know how to fix it?
Hi
When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Similar Messages
-
Issue with Apple TV not recognizing the home sharing option in itunes. Calls for paswrod but even when added it still does not recognize it. iTunes indicates that the home sharing optionis on but this is apparently not seen by Appletv. How can this be resolved?
Hi Augstiner57, I have the same problem. Did you figure it out? Mine seems to have happened after I updated Apple TV. Now it doesn't recognize my Home Sharing even though on my MacBook is it turned on.
I am running an old OS though (Leopard) so I am wondering if I need to upgrade. -
I just updated my MacBook (9/20/13) and now my Wifi won't turn on. Does anyone have a similar problem or know how to fix this?
I just completely shut down and turn on computer and wifi came back
-
My ipod touch 4g won't turn on, even if i reset it. If i reset it it just brings up the apple logo for about 10-15 minutes, flashes white, then repeats the before mentioned. Has anyone else had this problem and/or know how to fix it?
Did you try to connect in recovery mode to restore your ipod? iPhone and iPod touch: Unable to restore
-
Can anyone explain this behavior and tell me how to fix it?
Using NetBeans 6.5 on Windows, Glassfish v2.1
I have a JSF application with a page that has a tab set.
On one of the tabs I have a panel with company information.
One of the components on the page is an InputText field with the value bound to a session bean variable.
The tab also has an Add button.
Here is what the JSP looks like for the input text and button components
<h:inputText binding="#{MainPage.companyNameTF}" id="companyNameTF" readonly="#{SessionBean1.readOnlyFlag}"
<h:commandButton action="#{MainPage.mainAddBtn_action}" disabled="#{SessionBean1.disableEdit}" id="mainAddBtn"
style="font-family: Arial,Helvetica,sans-serif; font-size: 14px; font-weight: bold; left: 425px; top: 380px; position: absolute; width: 75px" value="Add"/>
This is all plain vanilla stuff and I would expect that when the Add button is pushed, the session bean property would be filled with
the value entered in the input text field.
In the java code for the page, I have a method to process the Add button push.
Originally, it just called a method in the session bean to check that a value was entered in the input text field by checking the bound
session bean property.
For some reason, that was not getting filled and I was getting either a null or empty string rather than the value in the text field.
I added some checking in the method that processes the Add button push so I could check the values in the debugger.
Here is a sample of that code:
public String mainAddBtn_action() {
String s = sb1.getCompanyName();
s = (String)this.companyNameTF.getValue();
s = (String)this.companyNameTF.getSubmittedValue();I check this in the debugger and NONE of the variants that I have listed have the value that was entered into the text field.
The submittedValue is null and the others are empty strings (that is what they were initalized to).
This is all pertty straight forward stuff and I am at a loss to explain what is happening.
Can anyone expain this behavior, and, most important, how can I force the values to be present when the Add button is pushed.
I have never experienced this problem before, and have no clue what is causing it.
Thanks.Basically, the component bindings are just being used in plain vanilla get/set modes.
I set them to "" when I do a clear for the fields and they are set to a value via the text field.
No other action other than to read the values via get to insert them into the database.
And, I always use the get/set methods rather than just setting the value directly.
This is what is so strange about this behavior - I have created dozens of database add/update/delete pages using this same model and have not had a problem with them - even in a tab context.
Not a clue why this one is different.
I did notice that I had an error on the page (in IE7, you get a small triangle warning sign when something is not right).
I figured that might be the problem - maybe buggering up the rendering process.
I tracked that down and do not get that anymore (it had to do with the PDF display I was trying to get working a while back), but that did not resolve the problem.
I don't think there are any tab conflicts - none of the components are shared between tabs, but I will see what happens when I move a couple of the components out of the tab context.
I noticed that it seems to skip a cycle. Here is what I can do.
1) Fill in text fields and add a record - works fine the first time.
2) Clear the text fields
3) Enter new data in the text fields and push Add
4) I get an error saying fields are blank from my data check process.
5) Enter new data and push Add - the record is added with the new data.
My work around is to not enter data in step 3 and just accept the error message in step 4, then go ahead and enter the real data in step 5.
Very ugly, but it works every time. -
I just upgraded to ios 5 and now my music does not play at all
I've tried hard reset and resynced a dozen times with nothing any helpAll my music is greyed out on my iPad. I did buy a song on my iPad this morning and now it is on my iPhone but no other music is on my iPhone.
-
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Im trying to reset my security questions but the reset info isnt reaching my email did anyone hve this issue and know how to fix it?
You need to contact Apple to get the questions reset, which can be done by clicking here and picking a method for your country, or if that's not an option, by filling out and submitting this form.
(95949) -
I cannot get any sound on my iphone unless I have headphones in any suggestiosn on how to fix this?
I cannot get any sound on my iphone unless I have headphones in any suggestiosn on how to fix this?
From the Community Ettiquette page found here.
Post only technical support questions and answers, unless otherwise noted.
Be polite, constructive and stay on topic.
Search for questions similar to your own before submitting a new question to the community.
Try item 3, I feel certain you'll find a solution. -
the ipad mini with retina free apps by apple have disappeared? e.g. keynote and imovie. i gotthem free with my ipad then when i deleted them i could still re-download them but now they cost money to download. i hope someone know how to fix my problim. thanks
Just want to add.
I replied to them for a waiver., and they reply with quite a similar email again, without helping.
The customer service IMO just use a template to answer question. Refer me back to the developer , which is apple itself -
I recently upgraded to iOS 7 on my iphone 4, since the upgrade I can not access my 3rd party app Password Manager. It will not allow me to sign in. Anyone else have this issue and know how to resolve it? DO NOT want to uninstall and loose my data.
Yes
-
I rented a movie from the iTunes Store and the download failed. I can't restart the download without error or rent other movies? Anyone have this problem and found a solution?
1. Sign out of your Apple ID
2. Reboot iPad
3. Sign back in to Apple ID -
I have an Iphone 4 13.5 GB, iOS 7.1.2. Currently when I make a call or someone calls me, I can hear people on call perfectly but sometimes they can't hear me. It maybe fine for afew mins but then sound drops again? Anyone have this problem and find a solution? Thanks.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
I can't import video from my Canon XF 100 into Final Cut Pro X. I'm told they are not compatible. Anyone have similar issues and/or solutions?
Google XfcpX.
-
my speaker in iphone 4s is not working from yesterday ..it happened suddenly while listening to songs....do anyone had this pblm and how u resolved it?
I got this problem solved and just want to let others know what it was.
I followed ewdel1's advice and brought my phone in to have it looked at and sure enough, was told that this is a problem others have had and it was due to a faulty integrated circuit. Luckily, I was able to take this in to be looked at when I did because my 1 year warranty was about to expire in a week.
Apple replaced my 4S with a "new" phone. The replacement looks and works good as new, so happy I didn't have to go through a hassle and the replacement was very straightforward.
Maybe you are looking for
-
After updating the latest on my MacBook OS X Version 10.6.8 I started experiencing several issues. iTunes will not open and continues to leave an error message on the screen. This is happening repeatedly for about 2 days. The error message looks like
-
How can I update my mac os x 10.6.8 to get icloud?
HOW CAN I UPDATE MY MAC OS X 10.6.8 TO GET ICLOUD?
-
ErrorStack Trace while creating DialogBoxes
Hi all, I am trying to implement the pdf (Handling Transactions with BAPIs in Web Dynpro)It is giving an error while creating DialgBoxes The error is Error stacktrace: java.lang.NullPointerException at com.sap.tc.webdynpro.clientserver.window.Co
-
How do I test a Procedure/Function in SQL Plus? I tried using the execute statement but it gave me errors.
-
With Logic 8 Is it Possible To....?
Play into it live on an audio track using my external synth's and "correct" my timing. Im not the "best" player be ANY stretch of the imagination but i would LOVE to play into Logic live and some how "fix" the audio so its on time with all the other