HT1695 i have two O2 Iphone 4 's and one refuses to connect to any wifi network, and gives me dialog saying, unable to join network "name" dismiss. I took it to O2 shop and it will join 02WIFI. They haven't seen this before and couldn't help. can you?
i have two O2 Iphone 4 's and one refuses to connect to any wifi network, and gives me dialog saying, unable to join network "name" dismiss. I took it to O2 shop and it will join 02WIFI. They haven't seen this before and couldn't help. can you?
Have you tried standard troubleshooting
ie reboot >> press hold and sleep until Apple logo appears ignoring
red off slider
and look at this
http://www.apple.com/uk/support/iphone/wifi/
Similar Messages
-
Is anyone else having the finish rub off of the keys on their macbook? I've had mine for about 6 months and several keys look like the finish is wearing through. I went to the local genius bar today and the techs said they'd never seen this before.
Some people have seen their aluminum uni-body discoloring due to body oils. Go figure.
Normally putting anything over the keys/aluminum will hurt heat disspation, but you may need to use keyboard covers.
Or save up $500/year for new keyboards.
Neither is supposed to be a sarcastic answer. Either one could end up being the solution.
Good luck with it. -
My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
when I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password; thoughts?
Does the iPod connect to other networks?
Does the iPod see the network?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My iPhone 3G is not able to connect to any wifi network
my iPhone 3G is not able to connect to any wifi network
Hi- Yes I tried manually adding the network (even deactivated password requirements on my home network but still doesn't work.)
I was reading another thread that has similar headline - seems the issue is with the upgrade to software iOS4 on a 3G. Folks have been able in some cases to get replacement phones. Seems issue is isolated to XP version. I have a MAC at home, so I will try to restore (yet again) on that computer and see if I can use it, otherwise I guess I'll go plead my case at the Genius Bar
Thanks on the responses. See "Wifi not working after updating to OS4 on iphone 3g" for more specifics. -
anyone around ?
Have you changed your WiFi password?
Just back into settings and connect to your WiFi network.
Settings > WiFI > Select your network > Enter password
You can also turn off the Ask to Join Networks notifications in the same menu at the bottom below
"Ask to Join Networks" switch to Off.
So if you're not connected you'll have to go in and connect yourself if it's not a known network.
If you've never connected using a WiFi network hit cancel and continue to use your Cell Signal/Data plan to access your email. -
hello i have been having trouble connecting to any wi-fi. ive tried everyting and can not connect to any wi-fi avalible. i have also rest my iphone 4s to factory settings and can still not connect to a wifi. what can i do?
If you cannot connect to any Wi-Fi then try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help try resetting all Networks.
Settings > General > Reset > Reset All Netowrk Settings
Still no help? Then make an appointment at an Apple Store for a consultation. -
I've never seen this request before. I rarely shut down my computer, and when I restarted it this morning, the above is what I got in a small box. I've tried to find "Completer" in help and communities but there is nothing. I don't want to put in my password until I know it is valid. I found on "google search" about Genieno which led me to a link in the Apple Communities. There is nothing in my apps or computer with that name. Anybody know what this is? Thanks.
There should be nothing native to the OS X which would ask for a password
or other information on a restart, unless accompanied by the traditional login
box with your user name.
There are adware or marginal products that could be called malware (bad)
that would impose their presence and some items that could have been
downloaded by accident or through some corrupted free software site; of
those some could ask for and gain permission to go through your Mac
and maybe even run in the background to do other nefarious misdeeds.
You could see if startup in SafeBoot allows you access past that the Completer.
Since I don't have a pile of helpful article links on how to resolve various issues
I'd be looking them up one way or another.
There are some helpful items in the site http://thesafemac.com - see Tech Guides
listed (adware, malware, & performance) plus a link to the adwaremedic page.
Also, Apple support has a helpful page on how to remove adware and other bits:
•Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
Hopefully this helps somewhat.
Good luck & happy computing! -
I have what looked like a small bug that ran up and down the screen and then sudenly stopped in center upper half of screen and now appears to be burned in to the inside of the screen, anyone had this probelm before and what can be done about it?
Thanks for the suggestion, the next step was to call Apple, who gave me a claim number, which I discovered you must have to get anything done with them. They refered me to a Apple store or repair center, after some reseach took it to the Computer Store in Mobile, Alabama and they were excellent. They took pictures of the screen with bug submitted it to Apple who denied the claim but they kept kicking it up to the next level and finally Apple agreed to sent new cover. The Computer Store had the cover the next day, they changed it out and now I am bug free. If your in the area of Mobile Alabama you can feel good about getting help from the Computer Store. For the two folks that responded to my note, Thank You, good comments and good advice.
-
My iPhone 4S won't load or connect to any wifi.
My iPhone 4S won't load or connect to my home wifi or any wifi. I have restarted the phone, turn the phone off then on, reset network setting, took the SIM card out and back in, clicked on forget this network and tried airplane mode and still no luck. Need help please ASAP,
Hi JSteege22,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Sounds like you've tried a lot of things, but you may need to reset your router, etc.
Click on the link to see more details and screenshots.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
I hope this information helps ....
Have a great day!
- Judy -
Can someone help here?
Updating iOS on your phone would not have any effect on your Mac.
What exactly is the problem? -
Strange Japan/U.S. imessage/email issue, haven't seen this before
okay...my sister in law in japan has an iphone, my wife here in the U.S. has an iphone, i have an iphone. my apple id and icloud id is our primary email address. my wife and sister email back and forth all the time, our macbook pro to sister's iphone in japan. suddenly when my sister in law in japan emails our primary email address it only comes to my iphone as an imessage. we just skyped with my sister in law and she says she has not done any updates to her phone and did not do anything any different than she ever has, but we can't figure out why i am getting her emails as imessages, and they aren't even at least going to our email on the macbook pro at all. help...
by the way, i do not, nor ever have, any email set up on my iphone if that matters.
-
HTML website - jumping around the screen, haven't seen this before.
I have just uploaded a site.
www.surveyplan.com.au. It consists of basic tables which are jumping around when the links are clicked. I have set all the tables to be either 100% or by pixel dimension and either way it still doesn't fix the problem. Seems to be worse on a smaller screen...what a pain in the ***!
Any help appreciated.There is indeed an issue with DW templates and IE, the whole page is redrawn resulting in some flickering (Firefox should not have this problem with your pages). There is a sort of solution for this. It is not a nice one but it may work for you.
You can add some metatags just below the other meta tag in the head:
<!-- necessary to remove IE flickering when building up new page -->
<meta http-equiv="Page-Enter" content="blendTrans(Duration=0.01)">
<meta http-equiv="Page-Exit" content="blendTrans(Duration=0.01)">
It results in a smooth transition and will reduce flickering. I searched a few months ago for better solutions but could not find them, so I still use these
Grtz -
Installed 10.8.4 and now my wifi refuses to connect to any WPA2 network!
Installed 10.8.4 update yesterday in the office. After restart my wifi refused to connect to the network although it was connecting to it fine before the update. Used ethernet and downloaded the Combo update. No improvement. It connects to the public wifi but not to the WPA2. Went home and opened my MBA and found that it does not connect to my peronal WPA2! Removed security from my Guest network and it connects fine. Put the WPA2 back, and it refuses to connect. Any ideas?
seems the problem is that the 10.8.4 didn't install properly. here is the install log:
Jun 13 11:27:42 localhost UserEventAgent[11]: SUNotificationPlugin[uid=0]: Start event monitoring
Jun 13 11:27:50 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: Start event monitoring
Jun 13 11:27:50 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: trigger on login only to notify appstoreupdateagent
Jun 13 11:27:51 localhost Software Update[266]: SUCheckService: sending result 2 to peer
Jun 13 11:27:51 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: check done with result SUCheckServiceResultUpToDate
Jun 13 11:27:51 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: Notifying appstoreupdateagent for user 501
Jun 13 11:27:51 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: appstoreupdateagent notification sent
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: @(#)PROGRAM:Install PROJECT:Install-735
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: @(#)PROGRAM:IA PROJECT:InstallAssistant-360.1
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Hardware: MacBookAir4,2 @ 1.80 GHz (x 4), 4096 MB RAM
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Running OS Build: Mac OS X 10.8.4 (12E55)
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: TMPDIR=/var/folders/xq/m2rn_pbx7h75qgc4r4zg3j940000gn/T/
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: SHELL=/bin/bash
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: HOME=/Users/smazhar
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: USER=smazhar
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: LOGNAME=smazhar
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: SSH_AUTH_SOCK=/tmp/launch-0l6NTO/Listeners
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: Apple_Ubiquity_Message=/tmp/launch-k7hwIw/Apple_Ubiquity_Message
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: Apple_PubSub_Socket_Render=/tmp/launch-k5ePm5/Render
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: COMMAND_MODE=unix2003
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: __CF_USER_TEXT_ENCODING=0x1F5:0:0
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Using distribution archive from /Applications/Install OS X Mountain Lion.app/Contents/SharedSupport/OSInstall.mpkg
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: Configuring products from SharedSupport folder
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: Using product <OSInstallDVDProduct> based on media at /Applications/Install OS X Mountain Lion.app/Contents/SharedSupport at distance 5
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: Using product <OSInstallESDProduct> based on distribution at /Applications/Install OS X Mountain Lion.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: Checking Software Update catalog URL http://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleop ard-leopard.merged-1.sucatalog
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: No available package ref for compatibility update. Ignoring.
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 13 11:29:44 localhost Install OS X Mountain Lion[426]: IATool launched
Jun 13 11:29:44 localhost Install OS X Mountain Lion[426]: Using product <OSSoftwareUpdateCatalogProduct> from product keys (null) at distance 25
Jun 13 11:29:45 localhost Install OS X Mountain Lion[426]: Connected to IATool 7fd660f0
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Preventing machine sleep.
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Using product IA_PKSecureNetEnabledProduct <file://localhost/OS%20X%20Install%20Data/> at distance 5
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Using mutable product path: /OS X Install Data
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Retrieving 0 packages (0.000 GB)
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 13 11:30:10 localhost Install OS X Mountain Lion[426]: Finished operation queue
Jun 13 11:30:27 localhost Install OS X Mountain Lion[426]: Linking self-contained dmg into mutable product
Jun 13 11:30:30 localhost InstallAssistantTool[435]: Failed to prep /Volumes/Mac OS X Install ESD for brtool
Jun 13 11:30:30 localhost InstallAssistantTool[435]: Failed to prep /Volumes/Mac OS X Base System for brtool
Jun 13 11:30:30 localhost Install OS X Mountain Lion[426]: Restart requested
guid 0, euid 0
argv[0] = /Applications/Install OS X Mountain Lion.app/Contents/Resources/brtool
argv[1] = copyfiles
argv[2] = /Volumes/Mac OS X Base System
argv[3] = /
argv[4] = /OS X Install Data/InstallESD.dmg
argv[5] = /BaseSystem.dmg
Warning: kextd unavailable; proceeding w/o lock for <unknown>
Warning: proceeding w/o DiskArb
Ensuring /Volumes/Mac OS X Base System's caches are up to date.
Note: /Volumes/Mac OS X Base System/mach_kernel: No such file or directory
Primary kext cache does not need update.
CSFDE property cache does not need update.
rebuilding /System/Library/Caches/com.apple.corestorage/EFILoginLocalizations
Warning: Error 30 rebuilding /System/Library/Caches/com.apple.corestorage/EFILoginLocalizations
creating com.apple.Boot.plist data with UUID 69467D56-8D10-3B5C-B093-5914A842EF2E.
Mounting helper partition...
Looking for missing files.
Copying files used by the booter.
Error copying /Volumes/Mac OS X Base System/usr/standalone/i386/EfiLoginUI/ to /private/var/run/brmnt/com.apple.boot.P/usr/standalone/i386/EfiLoginUI/
ucopyRPS: copying files for booter: No space left on device
Rolling back any incomplete updates.
Cleaning up fallbacks.
Unmounting helper partition disk0s3.
Failed to update helper partition.
BRCopyBootFiles errored: 28
brtool function result = -12
Jun 13 11:31:42 localhost UserEventAgent[11]: SUNotificationPlugin[uid=0]: Start event monitoring
Jun 13 11:31:54 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: Start event monitoring
Jun 13 11:31:54 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: trigger on login only to notify appstoreupdateagent
Jun 13 11:31:55 localhost Software Update[344]: SUCheckService: sending result 2 to peer
Jun 13 11:31:55 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: check done with result SUCheckServiceResultUpToDate
Jun 13 11:31:55 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: Notifying appstoreupdateagent for user 501
Jun 13 11:31:55 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: appstoreupdateagent notification sent
Jun 13 11:31:55 localhost Software Update[344]: SUCheckService: okay to stop (did timeout=0) -
I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?
Obvious question, but have you got 'Find My iPhone' set on both devices? Settings>iCloud>Find My iPhone.
Maybe you are looking for
-
PCO Query: tag not found
Hi, I am writing values to a datablock on a PLC using SAP PCO and OPC as middleware. It is working for all tags in the datablock except for 2. This is a screenshot of both tags in the OPC Quick client (I am using Kepware OPC server). I can read and w
-
I just updated to 8.1.3 on my iPad and now i can't log in. Any solutions?
can't log in after upgrading to 8.1.3 on my iPad Air
-
HT1657 I'm unable to download my movie. It says there is an error
Can't download says error
-
Dynamic Proxy and OutOfMemoryError
I ran into this problem before when working with Proxied objects. I am integrating iBatis into my framework and using Dynamic Proxies to allow a developer to pass in a DAO interface and the Dynamic Proxy will retrieve the correct iBatis SQL Map and r
-
# This was posted under wrong area so re-posting here as suggested I run a large University Network with a good 3000 pcs being a in a separate residential network. On this network there are obviously a fair few macs and recently some have started doi