HT1695 im trying to join the network 2 wire798 and it doesn't allow me

I just purchased an iphone 4s and it is asking me to select a wireless network and 2wire798 comes up..I tried to make up a password but it doesn't accept it. please help!

Is is YOUR network?  Doesn't sound like it if you have to "make up" a password.  Try buying a wireless router and setting up your own network instead of trying to leech off of someone else.

Similar Messages

  • TS1398 My i-phone model MD654LL/A serial F17JWNAF8H2 says "Unable to join the network "sunday".  This is my WIFI network I have had for years.   My I pad has no problem connecting, but not my i-phone. I just tried my daughter's i-phone and it has same pro

    My i-phone cannot connect to my wi fi-all of a suddon.  My wife's i-phone 4 is connected to the wi-fi network.
    I just tried to connect my daughter's i-phone 5, and could not connect message came up "unable to join the network "Sunday".
    My I-pad is connected to Sunday also.
    I tried the reset routine, and when I try to get on line, it asks for my password.  I put it in and it stll says unable to hoin message.
    Can someone help?

    Reset your network settings. Settings>General>Reset>Reset Network Settings

  • I bought a used ipod that I'm trying to set it up and it isn't letting me join my home wi-fi network. So I turn it on and I pick language, then country, then my wi-fi network. When I put in my password it says  -Unable to join the Network.  please help!!!

    I bought a used i-pod touch 4 gen that I'm trying to set up.  It isn't lettting me join my home wi-fi network. So I turn it on and I pick language, then country , then my wi-fi network.  When I put in my password is says - unable to join the network.  I have 4 other Apple products that I have that are working fine.  Please help

    Badunit you said "Continue setting up without the network. You can skip past it, right?"
    It sounds like he is setting up the iPod via wif. You can't continue. What yo can do is reset the iPod
    - Reset the iOS device.
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then start the setup over again but this time connect the iPod to a computer and set up via iTunes. Then he can troubleshoot the connection proboem.

  • I am trying to connect to a network but keep getting a message saying "Unable to join the network' and the only option is dismiss, what can I do?

    I am trying to connect to a network on my ipad but keep getting a message saying  " Unable to join the network" and the omly opion is dismiss.....Can anyone help me find out what is wrong please?

    Have a look at this may help
    http://www.apple.com/uk/support/ipad/wifi/
    Are you refering to a home network or some form of public
    if home network ensure your router has latest firmware and try rebooting it

  • Hi there!  We just got an ipod touch 8G.  We have wireless internet, but can't join the network with the ipod touch!  Very frustrating and we have tried all of the troubleshooting suggestions on the support site.  Help!  The router is a linksys WRT120N.

    Hi everyone!  WE just got an ipod touch 8G.  We do have wireless internet, but can't join the network with the ipod touch.  Message comes up.."unable to join the network".....very frustrating!  We have tried all trouble-shooting suggestions on the site, but nothing is working.  Anyone out there got any ideas for us??  The router is a Linksys WRT120N.
    Thanks for any help any one can give!!!

    Does the iPod connect to other neworks?
    Do other devices connect to the network?
    What encryption are you using?
    How you tried changing the type of encruption? Changing to no encryption?

  • HT1695 unable to join the network

    Has anyone ever had an ipad that worked fine for weeks, then got the error message "unable to join the network"?

    restart ipad
    http://support.apple.com/kb/HT1430
    if that don't help pull the plug of the router for 30sec and connect it again

  • TS1398 when I ask to join my wifi BT home Hub it accepts my password snd tries to connect but then comes up with 'unable to join the network'.  Any ideas?

    I am unable to connect to wifi through my BTHomehub.  When I try locates it them tells me it cannot join the network even after entering my password.  Any ideas?  I have done the reset of settings as adised by the aPPLE SUPPORT.

    I am unable to connect to wifi through my BTHomehub.  When I try locates it them tells me it cannot join the network even after entering my password.  Any ideas?  I have done the reset of settings as adised by the aPPLE SUPPORT.

  • New iPod Unable to join the network after inputting password

    Got my iPod this am..
    looked too good to touch no pun intended.
    I went through the instructions, interrupted with an offer to update_, which I did.
    I then saw that the iPod was off line and went to set up the connection.
    I do have a Time Capsule but I just use it as an external drive, I use Ethernet connections between it my Netopia router/modem which provides my Wi Fi for another computer.
    I have a WPA-PSK security on the Netopia.
    My Wi Fi shows up on available networks, I am asked for my password but then I get a message "Unable to join the network"
    I must admit that my password is long (and a bit racy) my fingers a bit big, but I know that I have got it right on at least a few occasions.
    I have tried entering the details on "Other network" with the same result.
    Could my WPA-PSK be a problem?
    I would be most grateful for any suggestions.
    Various forms of this problem have appeared on this forum, but I think mine is a bit different.
    Thank you.

    Thank you.
    Went through that pretty well.
    Finally solved it in 2 steps.
    1. reset my modem/router to factory settings.
    Odd situation, wireless settings, but dependent on ethernet connection.
    2. read a post from Hong Kong re strange network settings.
    On his advice, into network, changed location from Automatic to one of my choosing.
    Bingo! everything came good.
    Totally wireless connection. iPod jumped to it. Isn't it great when everything comes together?
    I still wonder why it didn't take the signal from the WiFi part of my Modem/Router?
    Probably just as well as it sorted my Time Capsule connections out, probably for the first time since I bought one back in early 2008, and its recent replacement when it joined the epidemic of sudden death recently.
    Cheers

  • When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home.

    When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
    turn wi-fi off and on again
    did a hard restart of my iPad
    reset network connections back to factory settings
    verified wi-fi is working as my computer accesses internet without issue.
    verified that my software is up to date.
    Does anyone have more suggestions?

    Couple of suggestions.
    First, many companies have a gateway on their networks that block non approved devices.  I work in such a place.  You might check with an IT guy , and see if they have a block in place.
    Second, the message you are getting means that you have not negotiated the security settings.  So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
    Again, if you can find one, talk to an IT guy and see if he has some suggestions.

  • IPhone 5 wi-fi "unable to join the network"

    My new iPhone 5 is my first iPhone and I've had it about a week.  I'm still in the process of setting it up but cannot connect to my home (secured) wi-fi.  I've been reading other Apple forums and Google suggestions and it appears this is a known Apple issue?  My phone came with iOS 6 installed so I have no update available.  I've turned off my router and shut off my phone, rebooting both but I still get an error message when entering our wi-fi password:  "unable to join the network".  I've turned off cellular and re-tried wi-fi to no avail.  I am NOT impressed with my first Apple product.  What a hassle.  Does anyone have any other suggestions to try or am I stuck waiting months for an Apple fix?

    There are a couple of things that you can try. First, try disabling the security on your wifi network and see if the phone will connect. Check the type of security you are using. Some have reported the iPhone reacts differently to some wifi security. Check to see if there is a firmware update to the router. This is usually the biggest culprit of the bunch. Once routers have been updated and restarted, troubles disappear.

  • I have a new iPad 2 which will not connect to my wi fi despite a new router being installed. When I tap my network name (which is with TalkTalk) the message comes up "unable to join the network TalkTalk etc...)

    I have a new Apple iPad2 which will not connect to my wi fi despite a new router.  When I tap the correct address it comes up with the message "Unable to join the network TalkTalketc... It does connect in other peoples' houses . Am I right in thinking that the trouble is with TalkTalk?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • 'unable to join the network...' wifi network error ! please help, 'unable to join the network...' wifi network error ! please help

    im on pay as you go.. still trying to set up wifi to my home network.. im putting in the password (sky broadband) and i keep getting the message
    Unable to join the network...
    driving me crazy now - please help !

    Other possibilities:
    Your router firmware is out of date. Check the manufacturer's website for an update
    You have MAC (Media Access Control) filtering enabled on the router, that restricts access to "known" devices and the new iPhone is not on the table of known devices
    Your router has a setting limiting the number of simultaneous allowed devices
    Your routers SSID ("name") is still the default (e.g., LINKSYS, DLINK, NETGEAR, etc). Your phone has encountered other routers with the same name as you have traveled, and the phone is confused as to which router is the real one. If your router's name is still the default you should change it.

  • How to solve the issue of 'Unable to join the network' on my iPhone 5!?

    I used to connect to a wifi network on my iPhone 5 and suddenly i could not connect anymore to this network. My phone kept showing 'Unable to join the network'. I tried 'forget this network' and resetting the network settings but none of these solutions worked. Can anyone help me to resolve this issue?

    Hi Jason,
    Please try with scope provided: Maven – Introduction to the Dependency Mechanism
    Kind Regards,
    Alex

  • There was an error joining the network usr5450

    Hello,
    my girlfriend today bought her first mac. An iMac 20" C2D.
    She was uncertain about it because she's a long time windows user but in the end she decided to switch to osx, oh happy day.
    At first boot there was immediately a problem. The iMac could see the wireless network (usr5450 access point) but when it tries connecting to it after 20 secs it gives this error message: "There was an error joining the network usr5450".
    So we decided to skip the network setup it during first boot and to do it later inside osx with more options.
    NO WAY.
    I'm clueless.
    The network is NOT protected by wep or wpa (her sister's new out of the box vista/vaio connected immediately...oh, the horror!) and I was able to connect with my macbook pro automatically.
    Every computer in her house connect wirelessly without problems execpt her new iMac.
    I run an hardware test. Passed without errors.
    We installed Osx update combo 10.4.9 and AirPort Extreme Update 2007-002. No change.
    The network is like that: modem-dlink switch-us robotics 5450 access point.
    Please, she's already regretting buying a mac, any help would be very appreciated.
    Thanks

    Welcome to Discussions, Riell!
    Check to see if there is a firmware update available for the router.
    The "there was an error" message you saw usually indicates something in the combination of the password and security method selected was not entered accurately or could not be accepted for some reason.
    First, turn on AirPort using its menu bar icon.
    Then open the Network panel of System Preferences. Click the "Assist me..." button at the bottom and click the blue "Assistant..." button in the drop-down box. This will open the Network Setup Assistant. Click the "Continue" button, then target "I use AirPort" and continue on to setup this new "location" within your iMac's Network perferences. Does this work for you? If not, what message do you get, or where do you run into a roadblock?

  • Why do I keep getting an "authentication failed" message when trying to join my network?

    Why do I keep getting an "authentication failed" message when trying to join my network?

    You may have to shut your computer off and pull the power adapter from both your ISP's Modem and your Router and wait 5 minutes and restart them in the following order.
    1st your ISP's Modem and wait a minute to get your signal and lights.
    2nd do the same with your Router and again you have to wait the minute.
    Last restart your computer and boot in OSX use Safari.

Maybe you are looking for

  • Unable to open a report and asking for user credentials

    Hi, when i am trying to open a crystal report, i am asking for user credentials and my URL is directed to the below URL http://hostname/PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpen

  • Automatically apply credit notes to debit notes in AR

    Hi, I have a requirement where my client wants me to find out the customers who have credit and debit balances on their accounts that balance out to zero. Also they want me to write a program that automatically applies the credit notes to debit notes

  • Acrobat 9 - "Title" for fillable field

    I'm new to creating forms with Acrobat, so I'm afraid I don't know the lingo. I apologize in advance. Is there a way to give a "title" to a fillable field that is only visable until the user selects the field? For example, if I want to create a secti

  • Unix Installation Error - Error parsing licence file

    Hi All, I'm trying installed OBIEE in HP-UX Box. I got a CD from my partner and trying to install OBIEE. But i got error at the first step itself. Below is the error: Error parsing licence file '/opt/oraclebi/Server/Oracle_Business_Intelligence/licen

  • NUmbers and Keynote

    In numbers I love the slider feature. It's a great way to quickly show what numbers can do. Is there a way to get that functionality in a Keynote slide presentation. I know that I can cut and paste a Numbers table into Keynote and it keeps all of the