HT1695 ipad screen says it is disabled and to connect to itunes, but wont allow me to put in a password
my dads ipad screen says it is disabed and to synch to itunes, but then when i ry to do that it asks for his password, which the ipad wont let me put in!
Place the iPod in Recovery mode and then restore via iTunes.
Similar Messages
-
ipod touch is saying it is disabled and to connect to itunes but when i do it asks for a password ?
copied from iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document. -
My ipod touch says it is disabled and to connect to itunes, but it won't let me. It is froze....what can I do?
Connect in recovery mode to restore, explained in this article: iOS: Unable to update or restore
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
copied from iPhone and iPod touch: Wrong passcode results in red disabled screen -
My iPod says it's disabled and to connect to itunes. now what
my iPod says it's disabled and to connect to itunes. now what?
Connect in recovery mode to restore, explained in this article: iOS: Unable to update or restore
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
copied from iPhone and iPod touch: Wrong passcode results in red disabled screen -
My iPhone 5S says it's disabled and to connect to iTunes, iTunes says it needs 4 digit pass code. I tried to restore it but device wasn't recognised. Any ideas? I only got it yesterday.
How did the passcode get on the phone to begin with, if you "only got it yesterday"? Regardless, to remove it, you'll have to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
This will remove the passcode. -
My ipod touch is saying its disabled and to connect to itunes but when i do that it does nothing, what can i do to fix it??
If your iPod has been disabled due to multiple incorrect passcode attempts, restore the iPod from the computer to which the iPod is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
TS2771 my ipod touch says disabled and to connect to itunes. but i tried that nothing happened
my ipod touch says disabled and to connect to itunes. i tried that and nothing happened
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My son the forgot password on his ipod and it's disabled, but when we do the restore through itunes it says it can't because it's locked with a passcode. Then I found a link to a site that helps with firmware, but I don't know which firmware to pick? Please help!
iOS: Forgot passcode or device disabled - Apple Support
-
my ipod says that it is disabled and to connect to itunes after putting in the wrong pass code. I have logged onto itunes and still it does not change. I have no clue what to do or why my ipod is acting weird.
Have you tried placing the iPod in Recovery mode and then connecting the iPod to your computer and restoring via iTunes?
-
got a itouch on ebay and it says ipod is disabled and i connect to my computer itunes it tells me itunes could not connect to the ipod because it is LOCKED with a passcode you must enter passcode on ipod before it can be used with itunes. I asked people I
iOS: Unable to update or restore
-
got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?
If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it
-
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I tried to install an update on my phone and it went a screen that that said I had to connect to itunes, but when idid nothing happened and now I tried to restore my phone and it wont' activate
Hi
You could order the Full Retail Version of OS X (Black DVD with a silver X on it). Regarding always starting up in Open Firmware, in this thread a bloke had the same problem until he disconnected his peripherals before restarting. See if the entire thread helps:
http://www.macworld.com/forums/ubbthreads/showflat.php?Cat=&Board=UBB13&Number=2 43591&Main=243591
Steve -
Ipod touch says its dissabled connect ti itunes but wont open up
ipod touch says its dissabled connect to itunes but wont open up
Try to connect in recovery mode, described here: http://support.apple.com/kb/HT1808
-
my phone failed to update and now only shows symbols to connect to itunes but wont connect. suggestions?
Put the device in DFU mode (google it) and restore.
Maybe you are looking for
-
I can't delete a file in the trash that has strange symbols (␀ ␀獭潤) in its filename.
There is a file in the Trash with a filename containing strange symbols, along with some Chinese characters. For some reason when I empty the Trash, all files are deleted as expected, expect this one particular file. The symbols are: ␀ ␀獭潤 - although
-
How to bring mouse cursor to the default button of a dialog, like in windows
Anybody know how to achieve this in LV? Please see the attached screenshot. - Partha LabVIEW - Wires that catch bugs! Attachments: Automatically move mouse pointer to the default button.PNG 34 KB
-
Ios 8.02 work slow in iphone 4s
Hi i am using apple 4s white color and i bought this phone before 3months ago. Before that time its performace was awesome but after upgrade ios8.02. Its work very slow and touch not perform as not as well before. Apart that apple 5 work good as i ch
-
How do you add a website back on to your certificate once it's expired?
When I went to the website, a notification popped up, and I was told the certificate expired on 12/30/2011 and it is now 1/5/2012. Can someone please help me make the certificate up to date again?
-
Prob in configuring rtl8139b network adapter
i have RealTek 8139B network adapter in my solaris7 machine. but i am unable to configure that one, bcoz solaris wont detect that adapter. is ther any way i can configure that adapter in solaris7... reply to [email protected] or post