HT1695 Is there a cable that can connect 5th gen Ipod to the internet?

Wifi dlink just quit. Is there any other way to connect Ipod touch to the internet? Thanks.

Yes it is. And I also agree with you regarding Netgear, which I've used extensively outside of work and prefer them over dLink. I'd rate Linksys under both.
If the OP has a pretty simple network I'd still go with the Apple Express as it also gives them AirPlay capabilities.
So I guess my view is as good as yours.

Similar Messages

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue. Is there a cable i can connect to another mac that will let me transfer the file?

There is another option if the Macbook will start up in Target Disk Mode.
Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
http://support.apple.com/kb/ht1661
Firewire symbol:

Is there a cable that can be used to connect a vhs player to an iMac?

Greeting all,
I am trying to find out if there is a cable that can be used to connect a vhs player to an iMac? I have some old tapes that I would like to transfer and convert to dvd.
Thanks

If you have access to a digital video camera that has pass thru capability you can use it in lieu of the ADVC110. Plug the VCR into the camera and the camera into the Mac and import into iMovie.
OT

Connecting 5th gen Ipod to itunes/updater???

I bought a 5th gen Ipod three weeks ago and haven't been able to use it yet. It apperars in windows but will not show up in itunes. I have done everything suggested on the support site and spoken to support staff twice and they tell me to send it back, i want to avoid this if poss.
The only thing I cant do is to restore it, as when I open the updater program it just asks for an ipod to be connected - even when showing on the system - therefore I can't run it.
I have all the latest itunes & updater, windows xp pro sp2, usb2 and all the recommended spec.
Has anyone else had this problem and is ther any way of fixing it. I have spent hours on this so far.

I am truly in a state of elation today after finally getting my 5g 30gb iPod to work. It's been three months and two pods since it all began, but here's how I did it (I really hope this helps someone - if it does pass it on, there are hundreds, maybe thousands, of people out there suffering as a result of these **** devices):
1, (I'm not sure this had any relevance - I wouldn't do it unless the rest doesn't work), but I reformatted it in windows FAT 32 (Right click ipod in 'my computer' drives list, format, complete format), don't worry if ipod then goes black & white with folder icon & message www.apple/support/ipod.
2, (Again, I'm not sure if this had any relevance, but you can change this back). Change the drive letter. To do this go to: Control panel, Administrative tools, computer management. In the left window select storage, disk management and when you select that the right window splits into two. In the lower half is all of your drives, right click the ipod and there should be an option to ‘change drive letter’
3. Remove ipod via the 'Safely remove hardware' icon near the clock. Uninstall all iPod updaters & iTunes via the 'add/remove programs' section in 'control panel'.
4. Disable any Anti Virus (I have AVG freeware), Firewall or Spyware software inc, Windows Firewall (personally, I think this is the common element among us and something I didn't realise was running as I had other software with a firewall).
5. Restart. Install iPod updaters & iTunes via your original disk. Restart.
6. When completely restarted (leave a few minutes) open the iPod updater, only plug in your ipod when prompted - At this point I got a box with my serial no and other ipod details in and the option to restore, but hit the restore button and it said something I don't remember, but was an error message. Anyway, I couldn't disconnect the pod so pulled out the cable (not recommended I know) and restarted the computer again and repeated step 6 again (removing the Ipod first). This time the restore button worked - it took about 10 minutes and automatically opened itunes when done and asks you for a name for it.
7. I already had the latest iPod updater downloaded (thereby not having to go online without AV/firewall running) so installed it and updated the pod.
8. Close everything, disconnect ipod and re-activate your Anti Virus, Firewall and Spyware software inc, Windows Firewall and restart.
Hopefully the ipod will again open itunes when connected. I think the real issue is the AV/Firewall software running while installing, many are suggesting it as a cause but no one knows for definite - I read somewhere Apple are aware that their software has issues when installed with AV/Firewall software running, but no specifics or information is ever given buy so-called help staff!!!
Good luck.

Can new 5th gen iPod Nanos be used with iTunes 8?

I have just installed iTunes 9 today and am DISGUSTED with version 9
already. I have a new 5th gen ipod nano on order and would like to go back to
iTunes 8 ... will the new 5th generation be usable in iTunes 8?
With iTunes 9 being such a launch and introduction disaster ... I may sell my new
iPod because it looks like it will only work with iTunes 9. If that's the case I am selling my
new iPod and picking up a 4th generation ipod on eBay.
It looks to a lot of Mac users, like Apple really screwed up iTunes 9 ... and as a result,
may turn many new prospective iPod Nano and iTouch owners off from purchasing any
of the newer iPods until Apple redesigns or seriously modifies iTunes 9.

What exactly are you finding so disgusting in iTunes 9? I have yet to find anything repugnant.
If you want to keep iTunes 8 I would suggest you buy a refurbished 4th Generation from the online iTunes Store and cancel your order for the 5th Generation.

I can connect to WiFi but not the internet

I am trying to connect a new IPad 2. I have a Belkin router that is B+G+N. I use WPA2 encryption and MAC filtering. The IPAD's MAC address was entered into the router and when I provide the encryption key as the password I am able to connect to WiFi but not anything Internet related except for email. When I type any URL in Safari it takes me to my router's management page. In fact I can log into my router and manage it from my IPad but I can't connect to anything else. I have 8 other computers/devices that connect to the router fine including two Apple Ipod touch's. This has me baffled.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Connecting 5th gen. ipod to new LG stereo with USB port. Functionality?

Hi,
I recently got a new LG "micro hi-fi system" (model LFU850) with a USB port for MP3 players. The problem is when I connect the ipod via USB, I lose all the functionality of the ipod database. In other words, the stereo numerically lists about half of the songs on the ipod (293, for example)and plays them in an order I can't figure out. I can't select playlists or albums on the ipod. The ipod does charge and allow the music to be played, and it does sound GOOD. Anything I can do to restore ipod menu functionality while hooked up to the stereo? Thanks in advance! Mike
5th gen. Windows XP

I had the same problem. Because music files aren't dragged or copied into iPod hard drive (the normal process for most mp3 players) but instead downloaded through iTunes into the iPod you lose functionality because iTunes categories music files in numerous and simultaneous ways e.g playlists/genre/artist/album/ etc. Most usb enabled stereos are not fitted with the technology to unlock all that information.
There are 3 solutions you could try.
1. Place music files and folders directly into iPod hard drive and not through iTunes. See if that works. The only problem with this solution (if it does work) is if you still want to use your iPod as a portable music player on it's own you will have to upload your music files again through iTunes into your iPod.
2. Buy a speaker system made for iPod but what's the point when you already have a usb enable stereo. One of the disadvantages of owning an iPod is that you never stop accessoring, the iPod on it's own is never enough because it lacks many basic utilities.
3. Stick to your old portable mp3 player or buy one with greater capacity - (there are some with 8GB) and return or sell your iPod (This is the option I chose). I can't offer advice on buying rival mp3 players such as Creative Zen or Zune as I'm not sure of what method they use to download music files.
Let me know how it goes!
5th gen Windows XP

ITunes crshes when i connect 5th gen iPod 30 gig...

iTunes wants to close when I connect my iPod(5th generation 30 gig w/ video) to my (Windows Vista) PC...

It's not a touch. These are freshly installed Windows 7 computers. Basically I lost everything on my iPhone and had to start from scratch anyways: songs and apps. I also don't have any podcast subscribed to.
The iPod Video 5th Gen has been zero written with Killdisk, then formatted in 16kb FAT32, then restored with iTunes. But as soon as you disconnect and then reconnect, iTunes loses face and crashes.
Like I said, this happened just after the iTunes update that happened like yesterday. I also tried to uninstall, then run a registry cleaner and then re-installed. Still nothing. As far as I can see, so far I think this is a problem with the new iTunes. I found a place to get an older version, I will uninstall 9.0.3 and re-install 9.0.2.
Update: reverting back didn't work.
null

Is there any websites that can track a stolen ipod touch 4g??

I just got my ipod stolen (it may be displaced but it's no where to be found) and I wanted to know if there was a website that is able track it

Yes but only if you had already set up up the FindMyiPod feature via MobileMe or iCloud and wifi is on and some other conditions are met.

Is there any software that can measure distance and area in the picture?

distance is the one of any circle, curve or straight line.
the measurement of area is the one of any shape.
i am trying to find such software on macintosh.
thanks
Message was edited by: pangeng

Try checking Versiontracker, Maclife Software Vault and Macupdate.
Message was edited by: CMCSK

Is it possible to connect 5th Gen Ipod Touch to HDTV to view HD content from Ipod Touch?

Can this be done? What cables would be needed? Thank You!

- Via Airplay to an Apple TV.
or one of these cables.
- http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3 a
- http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a

I have a 2009 A6 with a 5th Gen. iPod. I mostly listen to audio bks, not a lot of music. Often, the MMI starts on the first song on my iPod, therefore I don't know where I stopped in my 4-6 hr book. How can I get MMI to start where I left off?

I have a 2009 A6 with a 5th Gen. iPod pluggedinto the MMI. I mostly listen to audio books, not a lot ofmusic. The books are 4-6 hours long, vs 4-6minutes with a song. Often, but not always, when I start my A6, the MMI starts on the first song on my iPod, thereforeI don't know where I stopped in my 4-6 hour book. How can I get the interface to stay stopped where I left off? I have gone into iTunes and placed my current book as the first "song" on my iPod for ease of finding it, but often the MMI starts it over at the beginning. Thank you if anyone has any experience with this. My dealer in San Rafael, CA says they've never heard of this issue.

I think my iPod, which is an iPod touch 3rd generation , which is a lot different from a nano, which really makes it almost impossible for me to help you, which is why I suggested that you post your question in the iPod nano community. Your first post says that your product is an iPod nano. I think the people who answer those questions would be most likely to help you. If yours isn't a nano then you can pick the right community from here. This community is really to answer questions about this forum, or issues that don't fit anywhere else.
laverne's mom
Message was edited by: laverne's mom

Is there a cable that connects the 4s to an Ihome product

I purchased an iHome docking station for my husband for Christmas. We are having a difficult time connectng the phone and docking station with the phone in the otter box. Any suggestions for a cable that would connect the two?

Here's an actual response rather than a snotty blow-off:
You can't use the cheaper dock extension cables. even if they say "30-pin pass-through" they won't work with the iHome.
You need one of the $20+ cables or "stubs" -- i.e. DockStubz, CableJive, etc. The "stub" works fine but I find it precarious -- there's no support for the weight of the device. (Why do they make these things like this?) The cable is better if you don't care about the phone sitting nicely in the top of the iHome.
There is no other way, at this point. It's a stupid design flaw common to a number of devices I've used or seen -- can't fit the iPad/iPhone/Touch with a case on, even though most people use cases, and it would be very simple to include a fourth adapter insert with the iHome shaped properly to accept cases and bumpers.

TS1398 After leaving a wi-fi connection my iphone will not automatically connect to the internet via the 3G network unless I turn it off and then on again. Is there a setting that can be changed to overcome this issue?

After leaving a wi-fi connection my iphone will not automatically connect to the internet using a mobile 3G network unless I turn my phone off and then back on again. Is there a setting that can be changed to overcome this?

Then I'm at a loss. Mine has switched automatically from the start, favoring Wi-Fi, any of its registered networks, whenever available. Only thing I can think of is trying a Force Restart and see if that clears things up: hold down Home and Sleep till the screen goes black and a white Apple logo pops up. Release and allow it to restart.
May be similar, when I got the i5 about 16 months ago, the local carrier was starting to roll out 4G service. The phone would regularly lose all carrier connection, voice and data. Haphazardly would reconnect when it felt like it afterwards. Initially did the Off/On dance to speed things up, but discovered that using Airplane Mode would do the same without the lengthier power cycle. After awhile, the carrier 'fessed they were having capacity issues and later the problem went away. So yours too may also be a carrier issue.

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

LOL!!
I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
Do a search on ebay.. 3g router.
But you can get the TC to join a wireless network.
It is a non-standard setup that Apple will not support.. the option is hidden.
If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
But please note the end result of this setup..
very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

HT1695 Is there a cable that can connect 5th gen Ipod to the internet?

Similar Messages

Maybe you are looking for