HT1695 my device cant connects to current Wi-Fi network if available. even i enter the coorect password i received massege incoorect password

i cant use my wi-fi after i enter the coorect password its not work i receive massege incorrect password i rest the ipone and rest the networke and nothing happend pls help me to find away or send updat ios for all iphone this is a big problem now a days

Hello, Hazem Azab.
Thank you for the question. Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection. The second article cover the recommended settings for current Wi-Fi access points.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

Similar Messages

Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

HT1695 Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts?

I cant enter the serial number i received when i bought the product from softwareking

i cant enter the serial number i received when i bought the product from softwareking

May I ask
1. What they charged?
2. What exact product and version?
3. What message you get?
Please don't post the serial number!

Unable to connect mac OSX 10.4.11 to wireless network (virgin media) even though iPad, iPhone and laptop ok. Get message 'password incorrect' even though it works with other devices. Keep getting message connect to BT unrestricted access.

Keep getting 'do I want to connect to BT unrestricted network' which I have never used before. I can get my ISP details input but get message 'incorrect password' even though it works with 3 other devices. My network provider, Virgin Media, sent an engineer but he couldn't solve the problem - said network was all ok so problem must be with my iMac (OSX 10.4.11). When I try to use internet I get BTWiFi is current wireless network - I've never used this! I've tried to change this and virgin media details are accepted, it's just the password stage that prevents me from connecting. I am not very knowledgeable with computers so I really need a step by step guide to solve this problem. PLEASE HELP!!!

Excuse me barging in on the thread, but I have a lot of experience with Telus, and roaming with my BlackBerry (currently a Z10). In short, you've been fed some outdated info by the Telus rep. Telus has become very Android-centric, and it seems like a good number of Telus CSR's are still reading from a Legacy BlackBerry trouble-shooting guide.
My Z10 is unlocked, and I periodically use an AT&T sim when traveling in the US. I have never had to change an email setting to get full email function -- including the SMTP settings. To put it simply, your device first connects to a network using credentials provided. At most hotels, for instance, your device will scan for and pick up a WiFi network. The hotel will tell you the WiFi network name and give you a password to use. You simply enter the password when prompted, then you may have to agree to certain conditions. That's it.
Your email settings are just that. Using whichever network to which you are connected, the user name and password give you access. The settings coincide with the email provider's server settings. These don't typically change with the location from which you are connecting.
I'd suggest you take a look at this very helpful email settings tool provided by BlackBerry, if you are having difficulty: http://helpblog.blackberry.com/2013/03/email-account-validation-tool/
It helps you determine the possible settings for connecting to your email provider. Different providers offer different connection options, sometimes more than one. Opinions vary, but my preference in descending order is: ActiveSync, IMAP, then POP if required. ActiveSync (aka EAS) and IMAP will offer 2-way sync.
Take a look at the tool and pop a message back here if you have any questions. Good luck. ~ecm

I cant connect to wifi or a network. i get no service.

My phone made this weird pop noise and it smells like its burning. It still works though. However, i cant connect to wifi or to a network, it says no service. Do i need a new phone and whats wrong with it exactly?

Stop using the device.
Take it to Apple for evaluation.

Cant connect after being on secured network

Hello,
About 2 weeks ago I registered my macbook in the network of my university so that I could get wireless around campus. After succesfully using the system, i went back to my room and tried to connect to my personal router, but it didnt work anymore. It as only after having my computer off for many hours that i could use it again. The computer thinks its connected and can tell the strength of the signal, but when i open safari and go to google, it doent work. Also, today it was working fine, then i putted the computer to sleep, and when coming back, I got the same problem. All this started since registering my computer to the univeristy network.
any suggestions?

Look into the list of Preferred Networks to join under:
Network Preferences -> Show: Airport -> Airport tab then the By default join: list for Preferred networks and rearrange the order or whatever.

Cant connect to my wireless router, THere was an error in joining the airpo

Hi,
For a while now, my powerbook has not been able to connect to my wifi network. I have been using Ethernet to connect. The router is a linksys 802.11n router. It is a new router, I have mac address filtering on and my PBs mac listed in the router, I have wpa with TKIP and AES encryption on. I'm not even asked for the pass code. Any ideas?
Thanks,
Josh

nm, now i got it. I guess the pass code was way too long or something for the PB. My Wii was able to connect with the old one though.
Thanks
Josh

My wi-fi worked fine on Airport Express two days ago. Now the light is green, but I can't get the Internet on my satellite connection. I've checked Network Preferences, Aiport Express menu, and the satellite tech support. The Ethernet connection works.

My wi-fi connection from my iPad via the Airport Express Base Station on my home computer worked just fine until yesterday morning. I have a Macintosh G5 with a satellite connection. I could not get an Internet connection. After using the Network Preferences and Aiport Express applications several times, then unplugging and replugging in the computer, satellite modem and Airport Express module, checking the satellite dish for any obstructions, and so on, the computer still wouldn't connect to the Internet. (The green light was on in the Airport Express module.) I called the satellite company technical support division last night. The tech couldn't find any problem with the satellite connection. When I plugged the satellite modem cord directly into the Ethernet outlet on my computer, I could pick up the Internet.
Today, the Airport Express module still has a green light but still doesn't connect to the Internet. The only thing I can think of is that lights went out for about 15 minutes yesterday morning. All of my electronics, except the Aiport Express Base Station, are on surge protectors. Why would the Airport Express module still have a green light if it was damaged by the electrical outage?
I bought the module in 2009. I have never had problems with Apple equipment before this. Is this base station fixable?
I would appreciate your suggestions.

Hello everyone. I too have experienced the same problem Mary described starting on the same day she mentioned January 12. I have a G5 iMac, a G5 mini-mac, and a G4 laptop. They were all working fine but all have mostly the same problem now in that the G4 does not connect at all and the G5s connect once in a while after restarts but do not maintain the connection. In my case there was no power interruption. In fact, the G4 laptop was not even connected to the home power connection. My iPad2 and iPhone 4s wireless work fine and a wireless PC and Android tablet work fine as well. The G5 and G4 work fine on an ethernet connection. ISP tech support (AT&T u-Verse) was very generous with their time in trying to solve my problem although it was established early on that their connection and equipment was working fine and that the problem was with my computers. They walked me through a manual reset of all the particulars on IP addresses etc. so the problem was not related to that either. In the end ISP tech support concluded that the problem must lie with the Airport driver. For some reason it changes the IP addresses to an incorrect address so it cannot connect. Indeed when I tried the diagnostics on the G4 I got a window Pop-up that said an application had reset my settings. (In retrospect I seem to recall that I may have gotten that same message early on with the G5s but at that time I did not think much about it and went about trying to reset the settings but that process never concluded well) I think that the problem may be that there must have been an update of the Airport software that was not backward compatible with the G5 and older Macs. I mention all this for two reasons. First, perhaps someone out there who knows better than I do how to bring this to Apple's attention and perhaps they will address this. Second, I would be curious to know whether there is anyway one can return a configuration on Macs to some earlier time period (as you can on PCs) when everything worked and then leave it that way foregoing any subseqent upgrades or any subsequent apps?

Cant connect to airport over wireless network

Hi all, I hope you can help.
I can't connect to my wireless network?
I have a netgear wireless modem (brand new today), if I connect my mac via ethernet i can use the web but not via wireless.
When I try to connect to a wireless network, it asks me for the WPA2 security code which I type in and it always fails to connect.
I looked in the airport utilities and tried to scan for devices but it would not show up my modem?
A bit of back ground to this problem. Yesterday I was using my old wireless net work. Netgear Modem connected to an AirPort Express Base Station with 802.11n and AirTunes. I have had this for a few years and has worked ok up until yesterday. I had an issue with my xbox 360 not being able to connect to my wireless network after an update so their Tech people told me to add the xbox mac code to my base station. I went into the airport utility and scanned for my base station and it appeared. I typed in the code and clicked ok. It then dissapeared from my airport utility and would not appear even when I scanned for it. Funny enough the xbox was connected but although I could see my network, my mac and 2 other PCs i have could connect?)
Any ideas as I can't suss this out.
Cheers

I have a netgear wireless modem (brand new today), if I connect my mac via ethernet i can use the web but not via wireless.
When I try to connect to a wireless network, it asks me for the WPA2 security code which I type in and it always fails to connect.
Try temporarily disabling any wireless encryption on your Netgear wireless modem/router. Can your Mac connect wirelessly now? If not, what is the model of your Netgear?
I looked in the airport utilities and tried to scan for devices but it would not show up my modem?
The AirPort Utility will only work with AirPorts or Time Capsules, not other vendors' products. Most non-AirPort router use web-based administration ... so you would have to use Safari or another web browser to access the Netgear.

Cant connect to OSX server over network in recovery mode

Hi guys.
First of all, thanks for any help you can give me.
I am running osx server on a mavericks mac mini on a home network. Attached to it I have a 1tb hard drive to which all the macs in my house use time machine to back up over my network and they are stored there.
I have just formatted one of my macs and want to restore it from these time machine backups that are on the osx server on my network.
When i enter recovery mode from boot (COMMAND R), it can see the "backups" on networks "Matts-Mac-Mini" but when i then click "CONNECT" it says "Enter your name and password for the server "Matts-Mac-Mini/local" so that Time Machine can access it.
It gives me a box with NAME and PASSWORD and a CONNECT button.
By DEFAULT the "NAME" it starts with is "root".......which I dont understand.
I have tried every single iteration of names and passwords I can think of but it still wont connect, it either shakes the box or gives an error saying "There was a problem connecting to the server "Matts-Mac-mini.local". Check the server name of IP address and then try again".
I have tried the log in details for the osx server, the login details for the mac im trying to connect from, used root as the username, tried capitals, no capitals, spaces no spaces etc. I am at a total loss and about to tear my hair out!!
Is there anyone able to give me any help with this please, I would be SO grateful!
Many thanks,
hardtofin

I think I have isolated the password, with a certain username and password the box never shakes and instead gives the error: "There was a problem connecting to the server "Matts-Mac-mini.local". Check the server name of IP address and then try again".
Are you able to offer any help with this? I dont see why i can't connect to it, if the imac can already see it?
Many thanks again,
hardtofin

Hi guys i cant connect to itunes store to buy something from a game whats the solution?

i m trying to buy gems from clash of clans i could do it always but now there comes a message Can not connect to itunes store what can be the problem? I did all solutions from the apple support on the website

See if this article will help:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814

TS1398 I cant connect to WIFI because ipad wont give me join option w the correct password

I am setting up my new Ipad2 and when I get to the step to set up wireless, it asks for password to network. I enter the correct password, but the "join" button is not in play... unless I enter additional characters, the join button will not operate....
What do I do?

Sounds like your security is not configured for that password length in bits.
like for example
WEP
and
WPA2
see
http://www.midcocomm.com/resourcecenter/index.cfm/555/1/1

My iPod touch (4) picks up my internet connection at my office and at public hotspots absolutely fine. Additionally, it shows full connectivity to my home wireless network. However, even though it shows full connectivity, it does not truly connect.

It shows full connectivity (three lines) but when I go to the app store...it just loads and loads and loads...My other devices (iPhone 4s, macBook and PC/Laptop) connect fine. I talked to apple for an hour...no solution. I talked to my Internet service provider for an hour..no solution. I tried to contact my router manufacturer but it is rather old and linksys no long provides support for this model. I reset the router factory settings. I reset the iPod from new as well as a back up. The iPod is brand new...two days old. Nothing works. My next step is to purchase a new router. Can anyone out there help?

I will get one tonight and try it...so frustrating! It was a gift for my dauighter and she was so excited to use it...but was so dissapointed We'll see! Thank you for your input...and if it does work...I will be sure to post it...because I have seen other posts and they never post their solution!

I'm connected to my home internet network, but won't appear on the list

I'm in range of my internet network and it works, but it never shows up on the list for me to change things like the DNS settings...

Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on the router
- Resetting network settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

HT1695 my device cant connects to current Wi-Fi network if available. even i enter the coorect password i received massege incoorect password

Similar Messages

Maybe you are looking for