HT1695 my i phone not support wifi connection it was grey colour it was not active

Hi
My i phone not support wifi connection it was grey colour it was not active
please help me

Your WiFi chip has likely failed.  Bring your phone to Apple for evaluation.

Similar Messages

  • PC Suite does not support the connected phone........

    Hi...
    I have a big problem in the delivery of mobile and my type is N70 with Computer shows a message saying that some files missing from the mobile and this is the message that appears when connectivity.
    PC Suite does not support the connected phone. PC Suite settings file is missing from the phone. Switch off your phone, switch it on, and try again.
    Please assist in this matter, I can either send a site that I downloaded through by mobile phone.
    thank you very much..
    Moderator note: telephone number removed. It is not advised to publish personal contact information on a publically-accessible web forum.
    Message Edited by michaels on 14-Feb-2008 08:40 PM

    Hi Guys,
    It always better to give more information when you are posting your issues....Please try to give your system info, versions of the pc suite you are facing the issue :-( so that it may help others to narrow down ur issues :-)

  • HT1695 am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

    am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

    Is this your problem:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Otherwise:
    Does the iPod connect to other networks?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT201415 My iPhone is not having wifi connection anywhere

    My iPhone is not having wifi connection anywhere

    Hi PamelaVR,
    Thanks for visiting Apple Support Communities.
    I recommend starting with these troubleshooting steps if your iPhone battery is not behaving as you'd expect:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    iPhone or iPod touch displays the low-battery image and is unresponsive
    If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
    You should see this image when iPhone or iPod touch begins to charge:
    If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
    If the issue persists, follow these troubleshooting steps.
    From:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Regards,
    Jeremy

  • My ipda2, suddendly do not show the Wifi logo in the main screen,  so I do not have wifi connection. I  can't do any wifi setting

    My ipda2, suddendly do not show the Wifi logo in the main screen,  so I do not have wifi connection. I  can't do any wifi setting

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • My i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on

    my i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on..please suggest what to do??

    Hi PriankaB,
    Thanks for using Apple Support Communities.  This article has steps you can try if your iPhone won't turn on that may help:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    - Ari

  • Why won't my iPad connect to the wifi when my iPhone is right next to it, and my phone gets perfect wifi connection?

    I am currently having a problem with my iPad 2. It won't connect to my home wifi as well as my iPhone 4s. I have them both sitting right next to me and my phone has perfect wifi connection while my ipad can't even find the wifi. I've been having this problem for a while now. I've resetted it numerous times, had it looked at at the Apple store, and much more to try to fix this problem. I don't know what to do. Thanks for your time.

    Hi there Flesch,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    -Griff W. 

  • HELP - PC Suite does not support the connected pho...

    After trying numerous times now I cannot get my question to you via your website. In utter frustration I am posting my problem here.
    My problem is as follows
    When I connect my phone via cable to my laptop I get the following error message. 'PC Suite does not support the connected phone. Install a correct version of PC Suite and try again'. I have already uninstalled the version that previously worked fine and downloaded the version recommended by your website which is 6.80.22. This is actually the version I already had which previously did work. I amd still getting the same error message despite uninstalling and reinstalling numerous times. And when I plug my phone into my partners computer it works fine. He has the same operating system and version of PC Suite. I am using Windows XP Home Service Pack. I have a Nokia 6131

    Thanks for the descriptive posting, unfortunately there are still many things that can be wrong.
    You should try the things that are suggested here in many places: go to control panel - add/remove programs and select first Nokia PC Connectivity Solution and run a repair to it by selecting change - repair. Then same thing for Nokia PC Suite, run a repair to it.
    Then boot PC.
    Then check the PC Suite manage connections icon to make sure that the DKU-2, CA-53 USB connection is activated.

  • HT3887 why does my iPhone say device not supported when connecting to my make even after it has successfully paired?

    why does my iphone say device not supported when connecting to my mac pro, even though it has already succesfuly paired? I also use a wirless bluetooth keyboard and mouse on the computer successfully.
    Also when I turn Bluetooth on on the phone the devices cog never stops turning (forever serching for a device)

    iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer.
    It couldn't be much easier than that as you don't actually have to do anything more than normal.
    This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
    Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
    USB syncing is far faster than Bluetooth.

  • "DBSL does not support extended connect protocol" while configuring SSFS

    Hi, I'm trying to configure ssfs on ERP EHP7 on HANA Database system. Doing it with this guide - SSFS Implementation for Oracle Database
    But when I'm trying to test connection with r3trans I got following error in the log:
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): DBSL does not support extended connect protocol
    4 ETW000                         ==> ssfs won't be used                                                   26  0.004936
    I already updated DBSL_LIB to the latest version, but it doesn't help.
    Here is full log:
    4 ETW000 C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE version 6.24 (release 741 - 16.05.14 - 20:14:06).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 02.06.2014 - 13:49:16
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [     dev trc,00000]  Mon Jun 02 13:49:16 2014                                                 106  0.000106
    4 ETW000  [     dev trc,00000]  db_con_init called                                                        36  0.000142
    4 ETW000  [     dev trc,00000]  set_use_ext_con_info(): ssfs will be used to get connect information
    4 ETW000                                                                                                  61  0.000203
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  26  0.000229
    4 ETW000  [     dev trc,00000]  create_con (con_name=R/3)                                                 17  0.000246
    4 ETW000  [     dev trc,00000]  Loading DB library 'dbhdbslib.dll' ...                                    46  0.000292
    4 ETW000  [     dev trc,00000]  DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEED100000
    4 ETW000                                                                                                3840  0.004132
    4 ETW000  [     dev trc,00000]      using "C:\usr\sap\CM1\DVEBMGS04\exe\dbhdbslib.dll"                    21  0.004153
    4 ETW000  [     dev trc,00000]  Library 'dbhdbslib.dll' loaded                                            21  0.004174
    4 ETW000  [     dev trc,00000]  function DbSlExpFuns loaded from library dbhdbslib.dll                    42  0.004216
    4 ETW000  [     dev trc,00000]  Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.22)                 81  0.004297
    4 ETW000  [     dev trc,00000]  function dsql_db_init loaded from library dbhdbslib.dll                   25  0.004322
    4 ETW000  [     dev trc,00000]  function dbdd_exp_funs loaded from library dbhdbslib.dll                  41  0.004363
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    47  0.004410
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000)            24  0.004434
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.004452
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000205F170)            22  0.004474
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.004491
    4 ETW000  [     dev trc,00000]  New connection 0 created                                                  17  0.004508
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                  38  0.004546
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141BAEDB0)            44  0.004590
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.004609
    4 ETW000  [     dev trc,00000]  db_con_connect (con_name=R/3)                                             19  0.004628
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  24  0.004652
    4 ETW000  [     dev trc,00000]  find_con_by_name found the following connection:                          17  0.004669
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                 164  0.004833
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): reading connect info for connection R/3             34  0.004867
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=74,arg_p=0000000000000000)            24  0.004891
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=15)                                                   19  0.004910
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): DBSL does not support extended connect protocol
    4 ETW000                         ==> ssfs won't be used                                                   26  0.004936
    4 ETW000  [     dev trc,00000]  { DbSlHDBConnect(con_info_p=0000000000000000)                             31  0.004967
    4 ETW000  [     dev trc,00000]  DBHDBSLIB : version 741.10, patch 0.022 (Make PL 0.26)                    34  0.005001
    4 ETW000  [     dev trc,00000]  HDB shared library (dbhdbslib) patchlevels (last 10)                      32  0.005033
    4 ETW000  [     dev trc,00000]    (0.022) Get database version via dbsl call (note 1976918)               24  0.005057
    4 ETW000  [     dev trc,00000]    (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
    4 ETW000                                                                                                  32  0.005089
    4 ETW000  [     dev trc,00000]    (0.020) SQL DDL with data aging (note 1897636)                          21  0.005110
    4 ETW000  [     dev trc,00000]    (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
    4 ETW000                                                                                                  30  0.005140
    4 ETW000  [     dev trc,00000]    (0.014) Tablesize calculation for HANA optimized (note 1952609)         25  0.005165
    4 ETW000  [     dev trc,00000]    (0.014) Native SQL UPSERT with DataAging (note 1897636)                 21  0.005186
    4 ETW000  [     dev trc,00000]    (0.014) DBSL supports HANA revision number up to 3 digits (note 1952701)
    4 ETW000                                                                                                  27  0.005213
    4 ETW000  [     dev trc,00000]    (0.010) Quotes missing by FAE with the hint dbsl_equi_join (note 1939234)
    4 ETW000                                                                                                  28  0.005241
    4 ETW000  [     dev trc,00000]    (0.007) Obsere deactivate aging flag (note 1897636)                     24  0.005265
    4 ETW000  [     dev trc,00000]    (0.007) Calculated record length for INSERT corrected (note 1897636)
    4 ETW000                                                                                                  27  0.005292
    4 ETW000  [     dev trc,00000]                                                                            15  0.005307
    4 ETW000  [     dev trc,00000]   -> init()                                                                21  0.005328
    4 ETW000  [     dev trc,00000]    STATEMENT_CACHE_SIZE = 1000                                            181  0.005509
    4 ETW000  [     dev trc,00000]   -> init()                                                               505  0.006014
    4 ETW000  [     dev trc,00000]   -> loadClientRuntime()                                                   27  0.006041
    4 ETW000  [     dev trc,00000]  Loading SQLDBC client runtime ...                                         19  0.006060
    4 ETW000  [     dev trc,00000]  SQLDBC Module  : C:\usr\sap\CM1\hdbclient\libSQLDBCHDB.dll               779  0.006839
    4 ETW000  [     dev trc,00000]  SQLDBC Runtime : libSQLDBCHDB 1.00.68 Build 0384084-1510                  74  0.006913
    4 ETW000  [     dev trc,00000]  SQLDBC client runtime is 1.00.68.0384084                                  45  0.006958
    4 ETW000  [     dev trc,00000]   -> getNewConnection()                                                    28  0.006986
    4 ETW000  [     dev trc,00000]   <- getNewConnection(con_hdl=0)                                           78  0.007064
    4 ETW000  [     dev trc,00000]   -> checkEnvironment(con_hdl=0)                                           34  0.007098
    4 ETW000  [     dev trc,00000]   -> connect(con_info_p=0000000000000000)                                  27  0.007125
    4 ETW000  [     dev trc,00000]  Try to connect via secure store (DEFAULT) on connection 0 ...             62  0.007187
    4 ETW000  [     dev trc,00000]   -> check_db_params(con_hdl=0)                                         61365  0.068552
    4 ETW000  [     dev trc,00000]  Attach to HDB : 1.00.68.384084 (NewDB100_REL)                           7595  0.076147
    4 ETW000  [     dev trc,00000]  Database release is HDB 1.00.68.384084                                    49  0.076196
    4 ETW000  [     dev trc,00000]  INFO : Database 'HDB/00' instance is running on 'hanaserver'            6867  0.083063
    4 ETW000  [     dev trc,00000]  INFO : Connect to DB as 'SAPCM1', connection_id=201064                 43659  0.126722
    4 ETW000  [     dev trc,00000]  DB max. input host variables  : 32767                                   6954  0.133676
    4 ETW000  [     dev trc,00000]  DB max. statement length      : 1048576                                   34  0.133710
    4 ETW000  [     dev trc,00000]  DB max. array size            : 100000                                    75  0.133785
    4 ETW000  [     dev trc,00000]  use decimal precision as length                                           21  0.133806
    4 ETW000  [     dev trc,00000]  ABAPVARCHARMODE is used                                                   19  0.133825
    4 ETW000  [     dev trc,00000]  INFO : DBSL buffer size = 1048576                                         20  0.133845
    4 ETW000  [     dev trc,00000]  Command info enabled                                                      19  0.133864
    4 ETW000  [     dev trc,00000]  Now I'm connected to HDB                                                  18  0.133882
    4 ETW000  [     dev trc,00000]  00: hanaserver-HDB/00, since=20140602134916, ABAP= <unknown> (0)          30  0.133912
    4 ETW000  [     dev trc,00000]  } DbSlHDBConnect(rc=0)                                                    18  0.133930
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=30,arg_p=0000000000000000)             24  0.133954
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.133972
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F460)             22  0.133994
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.134012
    4 ETW000  [     dev trc,00000]  Connection 0 opened (DBSL handle 0)                                       36  0.134048
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=7,arg_p=000000000205F4B0)              25  0.134073
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.134090
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=63,arg_p=000000000205F2B0)             23  0.134113
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.134131
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F300)          12214  0.146345
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    32  0.146377
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=11,arg_p=000000000205F420)             26  0.146403
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.146421
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=22,arg_p=000000000205F390)             23  0.146444
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    37  0.146481
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=13,arg_p=000000000205F260)             29  0.146510
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.146528
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=24,arg_p=000000000205F210)             37  0.146565
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    35  0.146600
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=51,arg_p=000000000205F200)             40  0.146640
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=15)                                                   31  0.146671
    4 ETW000  [     dev trc,00000]  { DbSlHDBPrepare(con_hdl=0,ss_p=000000000205F4E0,op=3,da_p=000000000205F540)
    4 ETW000                                                                                                  46  0.146717
    4 ETW000  [     dev trc,00000]   -> buildSQLStmt(stmt_p=000000000205F4B0,da_p=000000000205F540,for_explain=0,lock=0,op=3)
    4 ETW000                                                                                                  89  0.146806
    4 ETW000  [     dev trc,00000]   <- buildSQLStmt(len=27,op=3,#marker=0,#lob=0)                            33  0.146839
    4 ETW000  [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0)           75  0.146914
    4 ETW000  [     dev trc,00000]  sc_p=0000000003AEAC40,no=0,idc_p=0000000000000000,con=0,act=0,slen=27,smax=256,#vars=0,stmt=000000000AD913E0,table=SVERS                        
    4 ETW000                                                                                                  46  0.146960
    4 ETW000  [     dev trc,00000]  SELECT VERSION FROM SVERS  ;                                              23  0.146983
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 PREPARE on connection 0                                   21  0.147004
    4 ETW000  [     dev trc,00000]  } DbSlHDBPrepare(rc=0)                                                  6174  0.153178
    4 ETW000  [     dev trc,00000]  { DbSlHDBRead(con_hdl=0,ss_p=000000000205F4E0,da_p=000000000205F540)
    4 ETW000                                                                                                  53  0.153231
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     25  0.153256
    4 ETW000  [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540)          25  0.153281
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  30  0.153311
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    21  0.153332
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  54  0.153386
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
    4 ETW000                                                                                                  33  0.153419
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  33  0.153452
    4 ETW000  [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,bulk=0,in_out=1,da_p=000000000205F540)
    4 ETW000                                                                                                  36  0.153488
    4 ETW000  [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,in_out=1,da_p=000000000205F540)
    4 ETW000                                                                                                  95  0.153583
    4 ETW000  [     dev trc,00000]    OPEN CURSOR C_0000 on connection 0                                      28  0.153611
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 SET InputSize=1                                           23  0.153634
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 EXECUTE on connection 0                                   22  0.153656
    4 ETW000  [     dev trc,00000]    execute() of C_0000, #rec=0, rcSQL=0, rc=0                            6404  0.160060
    4 ETW000  [     dev trc,00000]    CURSOR C_0000, rc=0,#rec=0,#dbcount=0                                   36  0.160096
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  33  0.160129
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=1)                                    21  0.160150
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,types=000000000205F518,#col=1,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  37  0.160187
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=72,rec_lng=144,db_lng=144
    4 ETW000                                                                                                  31  0.160218
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=144, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  31  0.160249
    4 ETW000  [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=1)                                    21  0.160270
    4 ETW000  [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      21  0.160291
    4 ETW000  [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,arr_size=1,types=000000000205F518,da_p=000000000205F540)
    4 ETW000                                                                                                  45  0.160336
    4 ETW000  [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEAC40,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  41  0.160377
    4 ETW000  [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20  0.160397
    4 ETW000  [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEAC40)                                   20  0.160417
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 FETCH (xcnt=1) on connection 0                            23  0.160440
    4 ETW000  [     dev trc,00000]    next() of C_0000, rc=0                                                  27  0.160467
    4 ETW000  [     dev trc,00000]    fetch() of C_0000, #rec=1, rc=0, rcSQL=0                                28  0.160495
    4 ETW000  [     dev trc,00000]   -> deactivate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540,rc=0)
    4 ETW000                                                                                                  91  0.160586
    4 ETW000  [     dev trc,00000]   -> StmtCacheFree(DBSL:C_0000)                                            24  0.160610
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 CLOSE resultset on connection 0                           20  0.160630
    4 ETW000  [     dev trc,00000]  } DbSlHDBRead(rc=0)                                                       34  0.160664
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=43,arg_p=00000001400FAB06)             25  0.160689
    4 ETW000  [     dev trc,00000]  INFO : SAP RELEASE (DB) = 740                                             19  0.160708
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    16  0.160724
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=41,arg_p=00000001400FAB98)             49  0.160773
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.160792
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002055888)             22  0.160814
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.160832
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002055880)             22  0.160854
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    26  0.160880
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=52,arg_p=00000000020558F0)             23  0.160903
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.160920
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=20,arg_p=0000000141FC74F0)             99  0.161019
    4 ETW000  [     dev trc,00000]  INFO : STMT SIZE = 1048576                                                21  0.161040
    4 ETW000  [     dev trc,00000]  INFO : MARKER_CNT = 32767                                                 18  0.161058
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.161077
    4 ETW000  [     dev trc,00000]  NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS'...
    4 ETW000                                                                                                  38  0.161115
    4 ETW000  [     dev trc,00000]  { DbSlHDBPrepare(con_hdl=0,ss_p=0000000002055160,op=3,da_p=00000000020551B0)
    4 ETW000                                                                                                  31  0.161146
    4 ETW000  [     dev trc,00000]   -> buildSQLStmt(stmt_p=0000000002055180,da_p=00000000020551B0,for_explain=0,lock=0,op=3)
    4 ETW000                                                                                                  32  0.161178
    4 ETW000  [     dev trc,00000]   <- buildSQLStmt(len=63,op=3,#marker=0,#lob=0)                            23  0.161201
    4 ETW000  [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEACD8,ss_p=0000000002055160)           38  0.161239
    4 ETW000  [     dev trc,00000]  sc_p=0000000003AEACD8,no=1,idc_p=0000000000000000,con=0,act=0,slen=63,smax=256,#vars=0,stmt=000000000AE09690,table=DDNTT                        
    4 ETW000                                                                                                  38  0.161277
    4 ETW000  [     dev trc,00000]  SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS' ;          21  0.161298
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 PREPARE on connection 0                                   19  0.161317
    4 ETW000  [     dev trc,00000]  } DbSlHDBPrepare(rc=0)                                                  6453  0.167770
    4 ETW000  [     dev trc,00000]  db_con_test_and_open: 1 open cursors (delta=1)                            30  0.167800
    4 ETW000  [     dev trc,00000]  db_con_check_dirty: 1 open cursors, tx = NO , bc = NO                     18  0.167818
    4 ETW000  [     dev trc,00000]  db_con_check_dirty: db_con_dirty = YES                                    16  0.167834
    4 ETW000  [     dev trc,00000]  { DbSlHDBBegRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
    4 ETW000                                                                                                  35  0.167869
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     23  0.167892
    4 ETW000  [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEACD8,da_p=00000000020551B0)          23  0.167915
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.167947
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    23  0.167970
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  34  0.168004
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
    4 ETW000                                                                                                  30  0.168034
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  31  0.168065
    4 ETW000  [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,bulk=0,in_out=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.168097
    4 ETW000  [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,in_out=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.168129
    4 ETW000  [     dev trc,00000]    OPEN CURSOR C_0001 on connection 0                                      20  0.168149
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 SET InputSize=1                                           19  0.168168
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 EXECUTE on connection 0                                   20  0.168188
    4 ETW000  [     dev trc,00000]    execute() of C_0001, #rec=0, rcSQL=0, rc=0                            5712  0.173900
    4 ETW000  [     dev trc,00000]    CURSOR C_0001, rc=0,#rec=0,#dbcount=0                                   34  0.173934
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.173966
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=2)                                    21  0.173987
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,types=0000000002055240,#col=2,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  34  0.174021
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=2,#int=0,#llong=0,#uc=0,rec_lng=16,db_lng=4
    4 ETW000                                                                                                  30  0.174051
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=16, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=65536)
    4 ETW000                                                                                                  32  0.174083
    4 ETW000  [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=65536)                                20  0.174103
    4 ETW000  [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      30  0.174133
    4 ETW000  [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,arr_size=65536,types=0000000002055240,da_p=00000000020551B0)
    4 ETW000                                                                                                  36  0.174169
    4 ETW000  [     dev trc,00000]  } DbSlHDBBegRead(rc=0)                                                    24  0.174193
    4 ETW000  [     dev trc,00000]  { DbSlHDBExeRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
    4 ETW000                                                                                                  35  0.174228
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     20  0.174248
    4 ETW000  [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEACD8,bulk=0,da_p=00000000020551B0)
    4 ETW000                                                                                                  33  0.174281
    4 ETW000  [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20  0.174301
    4 ETW000  [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEACD8)                                   20  0.174321
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 FETCH (xcnt=1) on connection 0                            20  0.174341
    4 ETW000&

    Hi,
    Could you check for SAP Note   1952701 - DBSL supports new HANA version number
    Regards,
    Gaurav

  • Tv not supported when connecting HDMI to ipad 30 pin connector running ios 8

    tv not supported when connecting HDMI to ipad-2 30 pin connector running ios 8.  Was working fine with ios 7.

    Hello,
    I need to conect it to either a mouse or an OLED display to transfer the content I was going to use thee standard charging USB to a port splitter and sending it from there but I wanted to check before I did something stupid.
    Thanks.
    James

  • Why not support WiFi / n in Russia??

    Why not support WiFi / n in Russia??

    According to MacTracker, your machine (in the US anyway) shipped with:
    Built-in AirPort Extreme card (802.11a/b/g/n)
    I'm not sure if there is a Russian equivalant of the FCC, but maybe Apple was just prevented from shipping 802.11n card to RU for some reason? If you have a local Apple Dealer, I'd take it to them and see why you don't have support for 802.11n on your AirPort card.
    Really odd...
    Clinton

  • SSL Client Binding Error (does not support directory connections encryp....

    So I'm getting the dreaded "does not support directory connections encrypted with ssl" error when attempting to bind clients (10.5) to the server (10.5).
    I followed the Apple KB article, but it did not help...double-checked permissions and the config files.
    Binding works fine w/o SSL...but evidently SSL does not.
    Any news on this?
    Thanks.
    j

    Hmmm...still running into the same issue...do I need to give the cert reference text file certain permissions in order to work?
    I have followed the advice on afp548, and have a self-rolled CA with a self-assigned cert for the server, which is also the dns name of the server. I copied the CA hash and pointed to that instead of the self-signed cert hash, but still...no dice.
    -j

  • Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

    Hi All,
    This is my first post to ms exchange forum am getting  Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
    or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
    with exchange (rest  IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
    Exchange 2013 CU6 with server 2012 Std 64Bit
    Thanks,
    Murali 

    Dear All,
    I have found the solution for above problem, the problem has occur due to PopProxy inactivity
    please find relevant exchange management shell commends below.
    1. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Inactive
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Active
    2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
    -State Active
    3. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Active
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Activ
    Replace yourmailserver.com with your server host name.
    Thanks

  • Using Outlook for Mac; emails and calendar announcements will not send--error message: "the server does not support secure connections" Help?

    Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?

    I have done a similar set of things and no results.
    This is really odd, Mac Mail works other emasil clients work, just not Outlook.
    The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time.  I ended up having to reset mine. 
    Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
    What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here?

Maybe you are looking for

  • Samsung NX100 RAW Support?

    I've been trying to use Aperture with the Samsung NX100.  In most conditions there is too much red/magenta.  In some photos it is absolutely out of control.  For example, a couple of indoor portraits had the person's face bright magenta, and a pine c

  • How to setup variants for webdynpro report in ABAP? Help!

    Hi Experts,    I have a webdynpro for ABAP report with selection screen.     How to setup variants for webdynpro report in ABAP? Thanks Gopal

  • Problem with DrawingPad Erasing

    Hi All, Im a little new to java so please forgive me if this seems blatently easy. Im working on constructing a drawing pad and I've got it so it will update and paint correctly when you drag, etc. with the mouse. I'm trying to add a colorchooser whi

  • ThreadPoolExecutor and using priority to determine what threads will run

    Hello, I am fairly new to Java, so I apologize if there is an obvious answer. The ThreadPoolExecutor is a great class for thread management. What I would like to do is have a priority scheme that would determine what thread should be run next. For ex

  • Poor font quality in Adobe Reader

    I have the same document open in two different PDF readers, and the font quality in Adobe Reader is really bad. I am using Adobe Reader 10.1.4. I have checked the rendering in Edit > Preferences. Smooth Text is on for Monitor. Why does this look so m