HT1695 my ipad will not connect to wifi but my iphone 4 will connect to same wifi network

i have an ipad but for some reason it will not connect to my wifi network. It is showing my network on the network page but will not connect to it just shows the circular icon loading. i have an iphone 3g and an iphone 4 they both connect to the same wifi network everytime no problem, the ipod used to connect to the same wifi network but not anymore ive tried re set etc but still nothing can anyone help thanks

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

I am having difficulty in connecting my IPAD 2 to my DRAYTEK 2820n router. Any suggestions as it will not recognise the password but my IPHONE 4 is perfectly OK.

I have just purchased an IPAD 2. I have tried to connect it to my DRAYTEK 2820n router but it will not recognise the correct password. My IPHONE 4 has no problem in connecting to this router using the same password. I understand that the wi-fi connectivity is the same for the two apple products so cannot understand why the IPAD will notr connect. Has anyone any suggestions?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

You tube wont work from wifi but my iphone will on my ipad first generation

When i try play utube on ipad it fails or may start nd then sticks all other wifi products in house can play the same utube items but ipad struggles or fails with server problems??

You can find a local shop and pay to get it fixed or you will need to send the phone to someone you know in Canada and have them take the phone into Apple for service. Then they will need to ship the phone back to you. The warranty is based in the original country of purchase.
Decide which is your best option.

SCXI 1520 quarter bridge setup will not output excitation voltage, but full bridge will

My SCXI system will not output an excitation voltage to the quarter bridge(verified with voltmeter). It works for a full bridge setup. When connected to a 'quarter bridge I' configuration, I can use MAX to null and shunt calibrate. The quarter bridge circuit appears to be balanced after the calibration, but the calibration results post a software gain factor close to zero, as well as a close to zero excitation voltage (eventhough I have the voltage configured for 5 volts). I have the SCXI 1520 module, the virtual channels, and the wiring properly configured (several years experience with this device). I'm using an old E series DAQ card AI-16XE-50, with the 50 pin cable that plugs in the back of the SCXI chassis. I noticed I had two bent pins with the cable connector module that plugs into the SCXI backplane. I was able to straighten them, so the cable connects properly, but I suspect the bent pin incident caused electrical circuit damage. Any suggestions on trouble shooting? None of the three 1520 modules I have will output an excitation voltage for a quarter bridge.

Sorry that I don't have an answer for you tyea, but I'm interested in your thread because I have a similar issue with a 1520. My excitation votltage, as measured with a DVM, is always 1V. I've tried 0V, 1V, 5V --- it's always 1V, on Full or Quarter bridge. I'm using a similar DAQ to yours - a PCI 16XE-10 (and a PCI-6030E on antother system).
I don't have a lot of experience with these modules. This could be a wiring or programmatic thing I'm doing wrong.
Richard

Blend will not read my PC but my PC will read the Classic

On my Classic the only page I gave when I open Blend is:
Blackberry Blend
Open Device Connection Page
I can read the Claccic from the PC but not the phine to the PC

Are you trying to view files on your PC via the File Manager application?
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!

Home Sharing will not work with my Windows 8 64bit with new itunes. All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App. They all did before. Only thing that has changed is new PC/itunes. Any Ideas?

Installed a new Windows PC on my home network. PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit. My itunes works, but I can not get Home Sharing to function now. None of my Apple TV's can see my computer library and prompt me to turn it on. All of my iphones, pods, pad, can not use the "Remote" app. When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code. I have reloaded iTunes, reset my router, updated all devices. You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to. Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before. However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV. Growing fustrated. Any ideas, would be helpful.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

My iPhone will not back up on iCloud, my iPhone will not back up on iCloud

It gets to about half way through and then goes back to the beginning.

Hey DebMcGrath,
Thanks for the question. I understand that you are experiencing issues creating an iCloud backup. The following resource may provide a solution:
iCloud: Troubleshooting creating an iCloud backup
http://support.apple.com/kb/TS3992
Thanks,
Matt M.

Firefox will not load any web page, other programs will. Continuously "connecting"

Firefox will not load any pages, but Google Chrome will. Firefox will 'load' the home page, but with any other site, the tab will continuously circle and say "connecting". I have tried clearing my cache, starting in safe mode, and restarting my computer. So far, nothing is working.

Update..when I open firefox from scratch, the main firefox pages on the home page seem to work. But as soon as I try to go anywhere else, IE going to a website in the address bar or even trying to access the defauly bookmark links, it just sits there loading but never brings anything up.

My iMessage will not let me sign in. The error message "Please check your network connection and try again" keeps popping up. I am connected to wifi.

My iMessage will not let me sign in. The error message "Please check your network connection and try again" keeps popping up. I am connected to wifi.

Welcome to Apple Support Discussions,
Have you tried:
Turn FaceTime or iMessage off and then back on in Settings.
Launch Settings by tapping the icon on the Home screen
Scroll down to Messages or FaceTime
Toggle the switch from on (green) to off (white)
Wait a minute
Toggle the switch back to on (green)
Wait for it to re-activate
Hard reboot your iPhone, iPod touch, or iPad
Make sure you're on Wi-Fi
Hold down both the Home button on the front, and the Sleep/Wake button on the top of your device
Wait for the Apple logo to appear
If it still doesn't work, repeat step 1 (turning FaceTime or iMessage off and on)
Reset network settings
Launch Settings by tapping on the icon on the Home screen
Tap on General
Scroll all the way to the bottom and tap on Reset
Tap on Reset Network Settings
If it still doesn't work, repeat step 1, then step 2, above (Turning FaceTime or iMessage off and one, rebooting).
(Source: http://www.imore.com/having-trouble-imessage-or-facetime-ios-7-heres-how-fix-it)

My ipad wont connect to wifi but my phone will. do have any suggestions on helping my ipad connect?

my ipad mini with ios 7.1? wont connect to wifi but my phone will,any suggestions on how to make my ipad connect to the wifi?

Try the steps in this Apple support document:
http://support.apple.com/kb/TS1398

Galaxy S4 will not make or receive calls or texts while connected to home wifi?

Recently, My Galaxy S4 will not make or receive calls or texts while connected to my home WIFI. The status bar WIFI icon is highlighted and the Connection Bar icon has 0 bars. When I check the WIFI connection in "settings" the status is connected and shows very strong strength. Any time I try to make a call or send a text I get a "no network error message" and basically I am dead in the water as far as cell phone use is concerned. My S4 is my primary phone for home and business use and is very inconvenient when I am missing calls, etc. I have done a phone reset and removed SIM Card as well as a rest. Please advise.

jlrwillis, I know this would concern me just the same and we definitely want to figure this out for you. How long has this been going on? Since you started experiencing the issue have there been any changes to the device? Software updates, application downloads, or damage to the device? If WiFi is off while at home do you see that you are connected to cellular service? Are you able to make a call that way?
AdamG_VZW
Follow us on Twitter @VZWSupport

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

Just got my iPad and when syncing photos will only sync recent photos taken on iPhone - will not sync any photos from my albums or events despite selecting all events

Just got my iPad and when syncing photos will only sync recent photos taken on iPhone - will not sync any photos from my albums or events despite selecting all events or even when i select specific events or albums.

What is the file name of the video(s) you want to sync?
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

HT204053 When I try to login to my apple ID on my iphone 4 to use facetime, it will not work and tells me to check my connection? I have even tried creating a new apple ID but the same message appears

When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection. I have even tried creating a new apple ID but the same message appears. I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking???

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking??? I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!! Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized??? I love my apple devices, but this is very frustrating. I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!! I am hoping apple will help me!!!
Thanks,
Melissa

melissafromlenexa wrote:
That is not the right device, it is the
Holux
M-1200E Bluetooth GPS Logger
I looked at the same sight for that and it does not say that. This is the first time I have posted a question, you don't have to be mean about it. I am trying to get this to work for a good cause.
It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that.

My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices,

My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices, it tells me that email is already being used. How do I delete the iPhones iCloud account and reinstall it to match my other devices.

Yes it will, just sign out, then sign back in with the correct address.
Settings>iCloud>Sign Out.

HT1695 my ipad will not connect to wifi but my iphone 4 will connect to same wifi network

Similar Messages

Maybe you are looking for