HT1695 my iPhone wont connect to any wifi connections

I have an iPhone 4S and anywhere I go and try to connect to the internet, if I type in the password it says "incorrect password". I have typed in the password correctly and it doesn't work at my house, work, or basically anywhere else. My brother has the same phone and it works at these places.

Hello Flair898,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
-Griff W.

Similar Messages

  • I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to easily, and when it does it can never connect?

    I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to find wifi, and when it does find a wifi network it can never connect?  You think apple would have a clue how to fix it!  Because turning the wifi on and off doesn't work, resorting network settings doesn't work, even restoring phone to factory default doesn't work...

    Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

  • TS1398 i tryed all of this an my iphone wont connect to wifi unless im like 5ft from router

    my iphone wont connect to wifi unless im like 5ft from the router this happened after i updated my phone to 6.1

    Same thing started on 1/30/13 for me first thing in the AM with my iPad mini.  If I am more than 10 ft away (line of sight) from my AirPort Extreme I get the not able to join network message even though it is showing 3 bars.  I was running 6.0.1 at the time and have just updated to 6.1 with no improvement.

  • After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

    After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
    switching off wifi and on again or going into airplane mode did't help!
    This problem happens only with ad-hoc wifi networks not with normal ones.
    (Ad-Hoc network was created on XP Computer)

    Welcome to Apple Discussions
    Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
    You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
    In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

  • My iPhone wont connect to my home wifi even though it says it is.  My iPad works fine on the same setting.  Confused?

    My iphone wont connect to my home wifi even though it says it is.  My iPad works fine on the same setting.  Confused?

    What is the iOS of the iPad, and what is the iOS of the iPhone 5?
    Also, have you tried this article: http://support.apple.com/kb/TS1398 ?

  • My iPhone wont connect to wifi but iPad and other devices do

    Can someone help...my iPhone wont connect to wifi yet iPad and other iPhone will connect

    Can someone help...my iPhone wont connect to wifi yet iPad and other iPhone will connect

  • My iphone can't see any wifi networks

    my iphone can't see any wifi networks ... i tried to reset network setting and reset all setting and update the ios system but no way

    I, too, fear it might be a hardware problem . I removed all security from my router but still no networks appear in the list nor can I connect directly by typing in the SSID. Tried two routers: Apple Airport Extreme and a Linksys something-er-other provided by Bell.
    I will give HP a call tomorrow and see if they can sort this out.
    Thank you for your help/advice!
    Edit: almost certain it's a hardware problem: I clicked on the Help button while on that "Scanning for networks" dialog during initial setup and as one of the "helpful" suggestions, it said my Mac address was 00:00:00:etc.

  • My iphone wont connect to WI FI

    My iphone wont connect to any wireless network

    If no change after resetting network settings on the iPhone and/or after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem. The iPhone includes a one year warranty.

  • IPhone 3G cant detect any WiFi since updated to 3.0 OS

    Hi, my iPhone 3G cant detect any wifi. Reset Network - DONE, Restore Firmware - DONE. Its happen since I updated my firmware to 3.0. Please do guide me. Thanks. Rgds from Malaysia.

    It took me days to find it...
    So, let's go:
    My iPhone does not connect to any WLAN/WIFI networks at all - just some days after updating it to 3.0. Now what to do?
    1. Change your WLAN-/WIFI-station to non secured (no password)
    2. Try to connect your iPhone - most probably it won't connect
    3. Change airplane mode to "On" and wait 10 sec
    4. Change airplane mode to "Off" and wait 10 sec
    5. Change airplane mode to "On" and wait 10 sec
    6. Change WIFI to "Off" and wait 10 sec
    7. Change WIFI to "On" and wait 10 sec
    8. Try to connect - most probably it will connect!
    9. Now change your WLAN-/WIFI-station to secured 128-Bit-WEP and give it a password
    10. Change WIFI to "Off" and wait 10 sec
    7. Change WIFI to "On" and wait 10 sec
    8. Try to connect with your new password - most probably it will connect again!
    In my case it now even connects easily to all the other networks again now!

  • I have tried to update to IOS 7.0.6 today and now my iphone wont connect to itunes saying, itunes has detected an iphone in recovery mode you must restore this iphone before it can be used with itunes. How do you restore it?

    I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring.  How do I restore it? I cannot get my phone on at all?

    Click restore in itunes.

  • My iphone wont connect to the internet, help me

    my iphone wont connect to the internet, help

    Try doing this:
    Settings
    General
    Reset
    Reset Network Settings
    then try reconnecting
    OR try this -----
    Clicking forget this network on the top of the Wi-Fi (click the button where it leads to more info on the Wi-Fi)
    then turn off the Wi-Fi and put it back on then it should come back up and try reconnecting

  • I have the right update of itunes but my iphone wont connect to itunes? What do i do?

    I have the right update of itunes but my iphone wont connect to itunes? What do i do?

    Hi jskills,
    If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may want to take a look at the troubleshooting steps in the following article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    - Brenden

  • My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?

    My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?

    You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
    Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212?viewlocale=en_US
    Good luck!

  • I downloaded ios 5, but my iphone wont connect to itunes ( haven't installed ios5), i downloaded ios 5, but my iphone wont connect to itunes ( haven't installed ios5)

    downloaded ios 5, but my iphone wont connect to itunes ( haven't installed ios5)

    Hello Apple_Addict22,
    Thank you for your question. iOS 7 requires iTunes 11.1.  First, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
    iTunes: How to install the latest version
    http://support.apple.com/kb/ht5654
    If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
    Download iTunes
    http://www.apple.com/itunes/download/
    Once the file downloads, double click on the installation file that downloaded to initiate the installation.
    Best,
    Sheila M.

  • Now the iphone wont connect to itunes

    I uninstaled my web cam on the laptop because my computer would shut down when i conected the iphone..well that fixed that problem but now my iphone wont connect to itunes...can anyone help
    ta
    Craig

    Follow the directions here:
    http://support.apple.com/kb/TS1495

Maybe you are looking for

  • How to use ejbs for accessing Function Module.

    Hi, I want to call ABAP function module using ejb(Since I want to expose them as web service on different server). I know how to do that using Models, but dont know how to go ahead using ejbs. Could you please guide me on this? Regards, Abhijeet.

  • Screen Capture File Size Discrepancy

    Can someone please explain to me why the screen capture (cmd-shift-4) generates such huge files? I made a screen capture which was saved to my desktop as picture-1.png. Examining the file's properties showed that the file size was 1.03MB. Next I open

  • Problem installing Mac OS 10.6.3!

    Hello, I'm trying to install MAC OS 10.6.3 on a HDD, but when I put the DVD it starts until the Symbols of the Apple and freezes, and not leave this, I tried to start with the"command + v" and is stopped and the fourth line is written: "MAC Framework

  • What generations  of ipod touch works with facetime?

    What generations of ipod touch work with facetime? I would imagine, one download the application to the computer then sync with the ipod touch. Will facetime work with itunes on a windows box or it only works with Apple computer / laptob....

  • Order's measurement points

    Hi Experts, I need to read measurement points asssigned to an order( it's functional location). We tried RFC MEASUREM_DOCUM_READ_TO_ORDER but it returns measurement documents (readings). In Our requirenment, the order is newly created and no measurem