HT1695 My wi-fi option is greyed out and I am unable to turn it on and connect to wifi. How can I fix this?
A few days ago my iphone decided to stop connecting to wi-fi. I tried to connect to different wi-fi connections but my phone does not pick up any. Now my "turn wi-fi on" option is greyed out and I am unable to turn it on. I have tried reseting the network connections as well as reseting the iphone back to original settings. My network provider couldnt help. I dont know what else to do??
I had same problem. I removed the back cover, and warmed wi-fi module by hairdryer of my wife). five days wi-fi works great. I do not know what will happen next.
during operation iphone must be turned off. time of heating is near five minutes. wifi module is located upper the battery, on the upper right corner of device.
Similar Messages
-
Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I'm attempting to create online help sourced from a FrameMaker 10 book using Robohelp 9 and Web Help (primary layout).
The text is interspersed with numeorus small icons which, in the FrameMaker documents, are .bmp images inserted into anchored frames in the lines of text.
Most of these icons were imported by reference into the FrameMaker book's chapters. Some were copied from another FrameMaker book and pasted into the present book.
Many of these images are turning out blank in the finished Help project.
Robohelp seems to convert these images into JPEGS.
In the source FrameMaker book, the images which appear OK in the Help project have Object Properties including: Facets: FrameVector JPEG ... Referenced File: No File
The images which appear blank have different object properties there: Facets: DIB ... Referenced File: (address of the image's source file)
How can I fix this and make all of the images appear in the Online Help?Sorry, Jeff. I missed the key word in your instructions. Well, I did the import and still no luck. I'm getting the exact same results with the same images. (In some cases, I'm even getting hidden conditional text from the FM document body showing up in the image's frame instead of the image! See below.) This is bizarre behavior, but it's not new with the import. It is happening both in the linked and imported WebHelp with the same exact images. (Just another piece to complicate the puzzle.) So we have some jpeg images that are blank, and a few that are glitchy. From what I can tell, the commonality, besides the fact that all these new images are in jpeg format instead of gif format, is that all the blank and glitchy images are in a text inset. I'm beginning to think maybe RH just doesn't support text insets at all.
Arnis, I'll have to ask my colleague how she created the images next week when she's back from vacation. I have no clue if there are any differences between the jpegs and why some are showing up correctly. What do you mean by "compression type or level?" Are you asking about the resolution (high, medium, low) she chose when saving the images, or which program she used to do the screen capture and editing? (We have Adobe Photoshop CS5 and FM 11).
My next step is to copy-paste all the content from the text insets into my FM document (in the book I am linking) and re-render to see if that solves the problem. It will make single-sourcing impossible because I'll have to copy-paste the new content and images my colleague creates into my document each time we do an update, but oh well.
Here is an example of a glitchy image in RH:
And here is what it looks like in FM:
So bizarre! -
i cant figure out how to download the application any other way. everytime i click on it in the downloads box it says application not found.
Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
Thanks fore responding to my question.
DFelice -
I have checked my installed programs, the list of add ons on internet explorer and the one on Firfox, and cannot find sweetim. However, when I try to do a keyword search in the location bar, I am only able to do it twice, until I switch to a new tab. After that, the keyword search no longer works, and gives me a message saying that I haven't typed in the URL correctly or it doesn't exist. There seems to be some connection to www.amazon.com, because everytime I open a new tab and try to do a keyword search in the location bar, amazon.com moves to the top of the small search window, and google moves down. I cannot search in the small window when amazon.com is up, because it won't let me overwrite.
When I check the about:config, and reset to the defaults after 2 keyword test searches, it sets back to the sweetim.toolbar as the default again. I was just resetting Firefox, but I think I've done that 8 or 9 times now, and I still have the problem.
What should I do next to fix this?HI Noah:
Thanks for your answer. I'm working my way through the blog, and trying to take all of the steps. Hitman Pro did find 5 trojans, and many remnants of other malware, so hopefully that will help. I'll post again when I've finished trying everything else.
I had already run Malware Bytes, It did not find/remove the sweetim toolbar, but found a different trojan. Something is up with my antivirus I think. -
When I go to my iMessage, it has me long in. I never logged out, but I can get to the part where it says "next" and I click that. then it will say verifying, but then take me back to the log in page and it doesn't tell my my username or password is wrong. how can I fix this?
iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues -
I bought me and my wife a iPhone 4 32G and it turns out that she gets better signal then me mine keeps going in and out of service most of the time i only get get one bar how can i fix this?
Restore as new in itunes and try again.
-
the option Join CD Tracks under Advanced tab is now greyed out and unavailalbe from downloading audio CDs. How can I fix this?
This post is closed. No replies needed
-
The wi-Fi button on my IPhone 4S is greyed out and will not turn on and therefore I am not able to receive wi-fi. How can I fix this problem?
Follow the steps in the article below to try and resolve the issue:
iOS: Wi-Fi settings grayed out or dim
If after all the steps the issue remains I'd suggest to book an appointment at an Apple Retail Store to have your iPhone evaluated or contact AppleCare for assistance.
Hope this helps -
When I sync my iPhone or iPad with I tunes, the music library appears on the device, but 95% of it is greyed out and cannot be played. How can I fix this?
kimberlyfromtopeka wrote:
Ok,thanks but, I should be able to something so that I am able to sync the entire library again not just the purchased songs.
If the non purchased music is not on your computer, how can it Sync to your iPhone... -
My ipod classic (80 GB, from 2006) is connected to a new computer, but only sync 241 songs, out 1825. I have restored several times. How can I fix this? my old computer is damaged and the new one run on Windows 8.
joseruiz1I ran into this same problem earlier with my new iPod classic 160 gb. Turns out it could be your files show in iTunes but they aren't connected to the location those music tracks are actually located.
Does this make any sense?
You basically have to make sure iTunes is picking your songs from the right music folder via your preferences.
Option 1: If your iTunes is completely wiped blank and your music is stored in a safe place, backed up, etc. You can do the following:
Step A. Preferences > iTunes Media Folder Location > choose folder
**** please be sure to pick a location that is new or different from where you ACTUALLY stored your music to prevent your files from deleting itself as it updates****
For example, if you stored your music on your Desktop then you wouldn't choose your music folder to be the one in Desktop. You choose the folder where you want your music to go such as C:\My Music or in Mac, you choose the music folder.
Step B. Once you choose the folder where all your music is stored and you check the box that says "Keep iTunes Media Folder organized" and "Copy Files to iTunes Media when adding to library."
Step C. This is the part that will make sense. Drag the folder on desktop that houses all your music into iTunes. Because you checked the box "Copy Files to iTunes Media when adding to library," iTunes will copy all the backup music you dragged into the folder location you designated it in "Preferences > iTunes Media Folder Location > choose folder."
---- once all that is done, your itunes will have ALL your music tracks linked to the right location on your computer and your iPod will sync with as many or all of the music you desire.
Hope this helps.
-Kayla -
When syncing Apps on my iPhone 5 through iTunes, they are all greyed over and I cannot make any changes. How can I fix this. It never happened with my iPhone 4
Connect your device to iTunes and in the the window were all the apps are greyed out make sure the 'Sync Apps' checkbox (top left corner) is selected.
-
I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?
Great tip Stephen!!
I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
Thanks for the tip. This question should be tagged as answered. -
A pop up window opens when I try to open safari, however, I can't exit out of it, nor can I continue using safari. How can I fix this? (the iMac was purchased summer 2011 and all updates done). Thanks.
I had the same issue and I found turning off safai extensions fixed the issue. Must be an extension that's causing this problem.
-
My daughter has changed her ipod touch password and it will not allow her to put in letters so therefore she is locked out! How can she fix this?
Connect the iPod to its syncing computer and restore via iTunes. If iTunes asks for the passcode and you can't enter the passcode or yu do not have the syncing computer, place the iPod in recovery mode and then restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when iall other programs are closed. How can I fix this issue?
Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.
Maybe you are looking for
-
Sending email using system default mail client on linux and Mac
Want to send e-mail using defalut mail client of Linux, Mac OSX, others.
-
Session Timeout Alert + login page has changed
Hello, We recently updated our SAP CRM 7.0 from EHP1 to EHP3. Since than we get this "Session Timeout Alert" error and it is very annoying. I've changed the rdisp/plugin_auto_logout parameter to 7200 s but the session is still ending after about 10mi
-
I am transfering songs from one computer to another using home share. Both machines are authorized in home sharing. The songs import from (my) windows computer to the other (my wifes) authorized MacBook Pro, computer just fine. Once the songs are
-
Blue Icicle XLR to USB adapter is not showing up on Logic Pro or Macbook Pro.
I've tried Aggregating it in the settings but there's no Microphone or Icicle even showing up. It's Glowing and I've tried the mic with an alternative interface so I know it works. Also there is no Driver for the product it is supposed to be plug and
-
Adobe Application Manager (AAM) is not loading
Can't install any apps - AAM won't load - Using Mac running 10.9.3