HT1695 My Wifi is connected however im not able to access internet nor email any help
My Wifi is connected however im not able to access internet nor email any help
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom
Similar Messages
-
I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?
SMS. Deggie, had them check that. After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID. Not impressed. I put what I've learned here in a simliar thread
https://discussions.apple.com/message/17416082#17416082
and this is what I've put in apple.com/feedback
"iMessage requires internet. SMS does not. iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need." -
I can not connect to app store and I have internet conexion. Any help please?
I can not connect to app store and I have internet conexion. Any help please?
Hi Rhiannon.A,
Try to reset all setting on your phone and see. If issues still persist try to back up your phone using iTunes and restore it using computer. -
Updated payment, still not able to access adobe audition?? help!!
updated payment, still not able to access adobe audition?? help!!
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again. Both are searchable, but are not able to find each other. Any help will be appreciated. Thanks.
Both need to be in the lobby, and searchable at the same time. Also, if either has been paired with a keyboard or headphone since you played, go into settings, and make sure those devices are unpaired, and not interfering with the process.
-
Not able to access Central admin or any other site
My machine name has been changed from abc-xyz to DT-012
After changing my machine name am not able to access Central admin or any other site in sharepoint. which says '
Server Error in '/' Application.'
Please tell me after changing machine name what else i have to change so i can access my SharePoint back.Hi Niraj,
Thanks for posting your issue, Just wanted to know have you changed server name using below mentioned command?
stsadm -o renameserver -oldservername oldservername -newservername newservername
I hope, you have not changed your SQL Server name/instance. If changed SQL too. Kindly re-run the configuration Wizard of SQL server to set up Alias.
Also, Browse below mentioned URLs to know more about the fixes of this issue
http://www.ericjochens.com/2013/03/change-sharepoint-server-hostname-and.html
http://www.bluesphereinc.com/blog/renaming-a-sharepoint-20102013-server/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
Plz someone help me.
It's rather difficult to give you advice since you do not say what you have tried or anything about your networking equipment but your underlying problem may be that you are not really be properly connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet. Other devices on your network may still have a proper IP address and continue to function.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
I hope someone can help with this
I am now unable to send any photos from my iPad2, When I got this last December it worked fine and I could easily take a picture and send it.
About a month ago I tried it and it and it failed, I was abroad and did not think it was a problem?
Although I have not changed anything to my set up outhe than automatic software upgrades on the iPad it refuses to work.
I can send emails without photos and tried rebooting and re setting the internet connection,
The email just sits in the outbox and I get the following message?
connection to the outgoing server "smtp. gmail.com" failed
Any help or suggestions would be appreciated ThanksThanks for replying and your time.
Unfortunately no rebuild option in iphone 3gs -
Safari not able to access internet through wifi after updating iphone 3gs with ios6
i have updated my iphone 3GS with ios 6 and initially my wifi worked fine but for some strange reason it stopped connecting to internet even though its connected to my home wifi i have and tried and failed with all the possible solutions given in this forum i am able to use safari with my cellular data network but with wifi its not working please provide me with a solution
well, first check whether you're connected to the blackberry network...
how can I check whether myself connected to blackberry?
Check within the network bars on the phone whether it is showing you 3G, EDGE or GPRS in capital letters...!!
If not give a hard-reset to the phone (remove the battery put it back once)...
And if it shows in caps letters then try requesting for services again... how? on the phone desktop > within the search bar > type "Host Routing Table".... search results shows you as "options"... select that & select host routing table... afterwards, hit the blackberry menu button > select register...
.RoCkInG dUdE.
Trust Your Technolust | Do not PM for any support
If a solution received, please hit on to show your support. -
Not able to access Internet or Internal network via SSL AnyConnect
After connecting succesfully with Cisco AnyConnect version 3.0.05152 I am unable to access internal resources. Below is the configuration of the ASA.
Any input on the below would be appreciated
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.02.04 16:15:58 =~=~=~=~=~=~=~=~=~=~=~=
sh run
: Saved
ASA Version 9.1(4)
hostname ASA
domain-name hb.local
enable password pEuUQweb2zEldXkE encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd pEuUQweb2zEldXkE encrypted
names
ip local pool Remote_VPN_DHCP_Pool 172.16.253.100-172.16.253.150 mask 255.255.255.0
interface Ethernet0/0
description *** Internet ***
nameif publicWAN
security-level 0
ip address X.X.X.X X.X.X.X.
interface Ethernet0/1
description *** Guest Wireless Network ***
nameif guest
security-level 50
ip address 10.0.254.1 255.255.255.0
interface Ethernet0/2
description *** Uplink to Branches ***
nameif Branches
security-level 100
ip address 192.168.254.1 255.255.255.0
interface Ethernet0/3
description *** Uplink to JHA ***
nameif JHA
security-level 0
ip address 10.0.8.1 255.255.255.0
interface Management0/0
description *** Managemnet Interface - NOT USED ***
management-only
shutdown
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
boot system disk0:/asa914-k8.bin
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns domain-lookup publicWAN
dns domain-lookup guest
dns domain-lookup Branches
dns domain-lookup JHA
dns server-group DefaultDNS
name-server 172.16.1.2
domain-name hb.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-10.0.0.0
subnet 10.0.0.0 255.255.255.0
object network obj_guest
subnet 10.0.254.0 255.255.255.0
object network obj-172.16.1.0
subnet 172.16.1.0 255.255.255.0
object network obj-172.16.1.5
host 172.16.1.5
object network obj-172.16.1.5-01
host 172.16.1.5
access-list Branches extended permit icmp any4 any4
access-list Branches extended permit ip any4 any4
access-list JHA extended permit ip any4 any4
access-list JHA extended permit icmp any4 any4
access-list guest extended deny ip any4 10.0.1.0 255.255.255.0
access-list guest extended deny ip any4 10.0.2.0 255.255.255.0
access-list guest extended deny ip any4 10.0.3.0 255.255.255.0
access-list guest extended deny ip any4 10.0.4.0 255.255.255.0
access-list guest extended deny ip any4 10.0.5.0 255.255.255.0
access-list guest extended deny ip any4 10.0.6.0 255.255.255.0
access-list guest extended deny ip any4 10.0.7.0 255.255.255.0
access-list guest extended deny ip any4 10.0.8.0 255.255.255.0
access-list guest extended deny ip any4 10.0.9.0 255.255.255.0
access-list guest extended deny ip any4 10.0.10.0 255.255.255.0
access-list guest extended deny ip any4 172.16.0.0 255.255.0.0
access-list guest extended permit ip any4 any4
access-list guest extended permit icmp any4 any4
access-list traffic_send_ips_module extended permit ip any4 any4
access-list outside extended permit tcp any4 host 172.16.1.5 eq https
access-list outside extended permit tcp X.X.X.X 255.255.255.0 host 172.16.1.5 eq smtp
access-list outside extended permit tcp X.X.X.X. 255.255.255.0 host 172.16.1.5 eq smtp
access-list outside extended deny ip any4 any4 log interval 30
pager lines 50
logging enable
logging timestamp
logging monitor warnings
logging buffered informational
logging trap warnings
logging asdm informational
logging queue 2048
logging device-id hostname
logging host Branches 172.16.1.80
flow-export destination Branches 172.16.1.80 2055
flow-export template timeout-rate 15
mtu publicWAN 1500
mtu guest 1500
mtu Branches 1500
mtu JHA 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp deny any publicWAN
asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (any,publicWAN) dynamic interface
object network obj-10.0.0.0
nat (Branches,JHA) static 10.0.0.0
object network obj_guest
nat (guest,publicWAN) dynamic interface
object network obj-172.16.1.0
nat (Branches,JHA) static 172.16.1.0
object network obj-172.16.1.5
nat (Branches,publicWAN) static interface service tcp smtp smtp
object network obj-172.16.1.5-01
nat (Branches,publicWAN) static interface service tcp https https
access-group outside in interface publicWAN
access-group guest in interface guest
access-group Branches in interface Branches
access-group JHA in interface JHA
route publicWAN 0.0.0.0 0.0.0.0 X.X.X.X. 1
route Branches 10.0.0.0 255.255.0.0 192.168.254.2 1
route Branches 10.0.5.0 255.255.255.0 192.168.254.2 1
route Branches 10.28.11.0 255.255.255.0 192.168.254.2 1
route Branches 10.55.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.55.6.0 255.255.255.0 192.168.254.2 1
route Branches 10.57.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.57.6.0 255.255.255.0 192.168.254.2 1
route Branches 10.71.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.71.6.0 255.255.255.0 192.168.254.2 1
route JHA 10.150.0.0 255.255.0.0 10.0.8.254 1
route JHA 10.251.4.0 255.255.255.0 10.0.8.254 1
route Branches 172.16.0.0 255.255.0.0 192.168.254.2 1
route Branches 172.28.0.0 255.255.0.0 192.168.254.2 1
route Branches 172.28.250.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.200.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.201.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.220.0 255.255.255.0 192.168.254.2 1
route Branches 200.0.0.0 255.255.0.0 192.168.254.2 1
route Branches 200.0.11.0 255.255.255.0 192.168.254.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
webvpn
always-on-vpn profile-setting
aaa-server HB_LDAP_Group protocol ldap
aaa-server HB_LDAP_Group (Branches) host 172.16.1.2
server-port 636
ldap-base-dn CN=VPN LDAP,OU=HB Users,DC=hb,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn VPN LDAP
ldap-over-ssl enable
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.0 255.255.0.0 Branches
http 172.16.0.0 255.255.0.0 Branches
snmp-server host Branches 172.16.1.80 community *****
snmp-server location Seagoville
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity config-change fru-insert fru-remove
snmp-server enable traps remote-access session-threshold-exceeded
sysopt connection timewait
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 publicWAN
ssh 10.0.0.0 255.255.0.0 Branches
ssh 172.16.0.0 255.255.0.0 Branches
ssh 192.168.1.0 255.255.255.0 management
ssh timeout 5
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd domain hb.local
dhcpd address 10.0.254.100-10.0.254.200 guest
dhcpd dns 12.127.17.72 12.127.17.73 interface guest
dhcpd enable guest
threat-detection rate acl-drop rate-interval 600 average-rate 5 burst-rate 10
threat-detection rate acl-drop rate-interval 3600 average-rate 320 burst-rate 640
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 129.6.15.28 source publicWAN
webvpn
port 4443
enable publicWAN
enable Branches
anyconnect image disk0:/anyconnect-win-3.1.05152-k9.pkg 1
anyconnect image disk0:/anyconnect-macosx-i386-3.1.05152-k9.pkg 2
anyconnect enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
wins-server none
dns-server value 172.16.1.2
vpn-tunnel-protocol ikev2 ssl-client
default-domain value hb.local
split-tunnel-all-dns enable
username HBAdmin password azFWMwV/tQh/YjoW encrypted
tunnel-group Remote_VPN_Users type remote-access
tunnel-group Remote_VPN_Users general-attributes
address-pool Remote_VPN_DHCP_Pool
authentication-server-group HB_LDAP_Group LOCAL
default-group-policy GroupPolicy1
dhcp-server 172.16.1.2
tunnel-group Remote_VPN_Users webvpn-attributes
group-alias RemoteVPNUsers enable
class-map inspection_default
match default-inspection-traffic
class-map ips_module_class_map
match access-list traffic_send_ips_module
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect http
inspect icmp
inspect ip-options
class ips_module_class_map
ips inline fail-open
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:1c38a95ce10dab97ac6ad2e99823f5a2
: end
ASA# exit
LogoffLooks like you are missing the nonat statement. Try adding the following and test (adjust the source subnet to match your needs)
object network VPN_range
range 172.16.253.100 172.16.253
nat (Branches,publicWAN) source static obj-10.0.0.0 obj-10.0.0.0 destination static VPN_range VPN_range
Please remember to rate and select a correct answer -
Windows laptop not able to access internet thru apple express network
I run macs all day long but was given a windows machine. I am trying to hook up on the net via a dsl apple network my brother has. I connect to his network but cannot get on the net. I have tried other(motel) wireless networks and they all work. He has had only 4 windows machines say they cannot connect. I am one of them. Have tried numerous settings but still no go. help anyone?
(should have just bought a powerbook!)
G4 desktop Mac OS X (10.3.9) Windows laptopI am able to connect to his network.
Do you get a valid IP address?
If it is 169.x.x.x or similar then you have failed to authenticate.
What is happening is your PC can see the network, but is in fact not connected.
he is using a
wep password.
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
Did you look at the guides I linked to in my other post in this thread?
I just cannot go on to the net. no
email or browser.
If you do have a valid IP address then in a browser try
http://17.254.0.91
and report back.
iFelix -
How can i save adobe reader file from my gmail into my adobe reader application. or is there any other way i can save it into my phone so I'm able to open in any situation not just from my gmail???
Long hold on the document in mail and it should give you the open in... option, select adobe reader and the file is now saved locally for viewing even while offline.
-
Hi,
I am using Qtel data sim at Doha - Qatar. I have receive a message to upgrade your carrier which I did.
Unfortunetly after upgradtion I am not able to view and edit the Cellular data setting & APN setting.
Please help me out as I am not able to access internet.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.
varunsharmaapplefan
http://support.apple.com/kb/ht5209 might help you. An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror. If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music. You should have no problem playing your iTunes over airplay though.
This may also help http://support.apple.com/kb/HT4437
Regards
Jules -
how can i surf in my iphone 4s, even after connecting to wifi also i am not able to access net?
i dont knw hw do u cal dis type of connection, dis s university wifi , am under dat using , here the thing s if somone want to connect wifi means they just hav to put proxy. i hav given evrything it also connected wel. i can c wifi signal fan in status bar.
Thousands of users from all over the world read these forums hoping to find English, their second third or fourth language. They make an effort to communicate in English. Try to join them.
Maybe you are looking for
-
Hi , I have an ALV with multiple selection possible , now if a user selects certain records and pressed the custom button attached , then the details corresponding to each record must be displayed in tabs of tabstrip on the next screen. This leads
-
I posted this question earlier but unfortunately there's been no resolution. I was hoping someone might be able to help. I have a project in Final Cut 5 where I'm splicing together a few MP3 files, making subclips, etc. - all with no video at all. My
-
hello! Is it possible to connect my playstation 3 to the iMac so that I could use it as a Monitor to play on? How, and what kind of additional cables will I need? thanks!
-
S10e -- Can I install Windows XP onto my Linux-Netbook and same way Linux on Windows Netbook?
Hello all, I wanna buy a S10e and I still have one question: Can I install Windows XP onto my Linux-Netbook and same way Linux on my Windows Netbook? I wanna use Suse for all my net applications and still wanna Windows for just old games running on
-
IPhoto deleted whole album except for one photo I had done on the previous day
I had just completed an album in iPhoto when it suddenly said something like "iPhoto had to unexpectedly shut down". When I went back in, everything I had done that day was gone. There was still one pic left in the album from the day before. How can