HT1695 problem, please I want solution !!!
I have problem with the cellular data , when I turned on the cellular data at the first time is not responding I have to switch the phone off and then on and then it will turned on or I have to rest the network data, please give me solution ??!!! I have Iphone 4s
As others have responded the iPhone currently only supports using a Headset for Bluetooth (allegedly it can also transfer the contacts/addressbook via Bluetooth to a car kit).
While I would agree transferring tones/music would be dubious, transferring photos is not, it is very common for normal phones to use Bluetooth to transfer photos to a printer for example.
You cannot even link a Mac to an iPhone via Bluetooth!
Three other common uses of Bluetooth that Apple have currently also chosen to prevent are, stereo headset support, using a Bluetooth keyboard, and using it as a modem. While using it as a modem for a Mac is of limited benefit due to the slow GPRS/EDGE connection of current iPhones, again this is widely used with 'normal' phones along with a GPS system (so the GPS system can get live traffic information and therefore automatically re-route you around problems).
One hopes that Apple will significantly improve the Bluetooth support (it can hardly be much less than currently).
Similar Messages
-
Bluetooth serious problem (please i want an answer and a solution !!!!!!)
why the bluetooth is not working from the origin except with bluetooth
headset?!!!! i want to know what is the problem, why we cant send tones or photos from iphone to any other cell phone (like ordinary phones!!!) via bluetooth , i beg the iphone programmers to make a program for bluetooth so that it works normally.
thank you people tooo much
byebyeAs others have responded the iPhone currently only supports using a Headset for Bluetooth (allegedly it can also transfer the contacts/addressbook via Bluetooth to a car kit).
While I would agree transferring tones/music would be dubious, transferring photos is not, it is very common for normal phones to use Bluetooth to transfer photos to a printer for example.
You cannot even link a Mac to an iPhone via Bluetooth!
Three other common uses of Bluetooth that Apple have currently also chosen to prevent are, stereo headset support, using a Bluetooth keyboard, and using it as a modem. While using it as a modem for a Mac is of limited benefit due to the slow GPRS/EDGE connection of current iPhones, again this is widely used with 'normal' phones along with a GPS system (so the GPS system can get live traffic information and therefore automatically re-route you around problems).
One hopes that Apple will significantly improve the Bluetooth support (it can hardly be much less than currently). -
Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit. Now it just won't open. When I click on the iphoto icon in the dock, nothing happens! Does anyone have a solution to this problem please?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Question
I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
::Worked for me:: -
I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT
If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699 -
Hello please I want the solution I have in my iTunes I own $ 112 and you purchase from the game of war gold price of gold and 99.99 discount iTunes money did not come in the gold game of war and that I am two days ago, I did not find the solution please I want the solution quickly
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quickly .
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
-
I have just changed to Firefox from IE. When i pull up my home page which is the BBC.co.uk I have always to reset my local region as it always defaults to London. I didn't have this problem with IE. Can you please supply a solution.
I fixed it!!! Following advice from similar posts, I searched the hard drive for "sessionrestore.js" in my Firefox Profiles folder (you'll need to enable viewing of hidden files in Windows Explorer (Tools > Folder Options > View (then select Hidden files option) then Apply to all folders) to do this). I then shut down Firefox, deleted the file and restarted - my home page was correct and it didn't try to open my old session! Some other posts suggested deleting everything called "sessionrestore" in that folder, but I didn't need to.
-
my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?
Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you... -
I can't activate my programs even though I paid for a subscription. I did a chat with the help desk and they didn't solve my problem. I want to cancel my account. Please contact me since the chat is down
Activating after a Find My iPhone lock bricks the device if you don't know the password used by Find My iPhone.
Read through this article to find if your device has an activation lock.
http://www.macworld.com/article/2048739/get-to-know-ios-7-activation-lock.html
If this is what you have - the news is bad:
http://www.cultofmac.com/246755/why-ios-7s-activation-lock-is-a-disaster-waiting -to-happen/ -
When i open my itunes of recent edition 12.0, i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.
Try iTunes for Windows: How to turn off Compatibility Mode.
tt2 -
I have sent a message to a friend. Afterwards, I created a new message again. And the message I have sent a while ago appears again even if I haven't type anything. Can you find a solution for my problem please?
You're welcome! Glad you got things sorted out.
-
My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.
I have tried re-installation but still have the same problem.
Could you please forward a solution to this problem.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
after i update my mobile sim card its not working i got message from apple to change the sim card and i cant change it please i want fix the problem
Yes, the message is self-explanatory. You need a carrier who supports Apple's activation policy for an iPhone.
iPhone: Wireless carrier support and features - Support - Apple -
Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
NaveenYour calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.
Maybe you are looking for
-
Dear Forum, When the goods issue to order or cost center, the cogs debited and inventory credited. 1 May I know when is the cost being calculated so that when the time I do GI, the system know how much to post. 2 Normally how many kind of cost includ
-
Update conflict resoltion ORA-01403: no data found
I have set up multimaster replication environment with two database and I have implemented Update conflict resolution on a table using DISCARD method(Oracle provided) as below. Some how it is not able to resolve the conflict and I am getting erro ORA
-
Metdata Query Crippling the Database
Hi All, We are using ResultSet getProcedureColumns(String catalog, String schemaPattern, String procedureNamePattern, String columnNamePattern) throws SQLException; method of the interface DatabaseMetaData
-
ISE incorrect information on the Dashboard after root patch
Hi all, my customer had an issue related to AD login, after Cisco dev got involved customer was given a root patch "rpssh_12.tar.gz" after applying this during the weekend now the Active guest (dashboard) displays incorrect information. meaning : it
-
S1 Portal Server Command Line Utilities
Hi, I want to check the health and state of identities(Desktop/Aggregation, Search Engine, Netlet & Rewriter) of Poral Server. "I am thinking this can be done by creating a dummy channel for a dummy display profile and associating it with a dummy app