HT1711 Itune's  not detecting the DEVICE  when i am connecting my iphone 4 to my laptop ?

Good morning,
                My iphone when iam connecting to my pc itunes not opening automatically and itunes i will open by manually. the itunes window will be open,then the left side bar will show DEVICE is detecting. but now it not detecting.So i couldn't download and upload any things from my pc to iphone and vice versa.

You have to tell us what error you're getting?

Similar Messages

  • Hi, when connecting my ipad air to itunes it doesnt detect the device it also doesnt sync what do I do?

    when connecting my ipad air to itunes it doesnt detect the device it also doesnt sync what do I do? I have tryed turning the device on ect also downloaded itunes several times but have had no luck.

    Hey daisycartwright1
    For more troubleshooting steps to take, check out the following document:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Welcome to Apple Support Communities!
    Cheers,
    Delgadoh

  • When I was updating I Phone version 4  from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

    When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

    Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
    (Do not use your own Anti-virus to SCAN)
    Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
    http://www.malwarebytes.org/products/malwarebytes_free
    Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
    To start your computer in safe mode
    Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
    On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
    When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

  • "An I-Pod has been detetected but Itunes does not recocognize the device.  The device does not show up on ITunes.  Help?

    When I hooked up my new Ipod Nano, The message in I-Tunes reads, "An I-Pod has been detected but Itunes does not recognize the device"  Any ideas to help?

    Hi mulebacker,
    Here is an article that provides troubleshooting steps for this message:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Cheers!
    - Ari

  • My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc

    My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help

    You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
    http://support.apple.com/kb/TS1538

  • HT1212 I have forgotten my passcode for ipad and itunes is not "detecting a device in recovery mode."

    I have forgotten my passcode for ipad and itunes is asking passcode to be entered - even after following directions for computers not synced... multiple times, but iTunes is not "detecting a device in recovery mode."  What do I do now?

    DFU Restore
    This will very likley result in loss of data.
    Plug the iPhone into the computer.
    Ensure that it is running the latest version of iTunes and that it has access to the internet.
    Press and hold both the home and sleep/wake buttons for exactly eight seconds.
    Release only the sleep/wake button but continue to hold the home button for another five seconds.
    Let go of the home button, then look at the computer screen for an instructional popup.
    The popup should say "iTunes has detected a device in recovery mode. . .(etc)"  Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
    If no popup appears, repeat the above DFU instructions.  If you've never done a DFU, it may take about three attempts to get the timing right.

  • Idad in reset mode but itunes does not recognize the device.

    I have my ipad in restore mode but itunes does not recognize the device.  What can I do to reset the ipad?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • After 4.3.4 update the ipPad is in Recovery mode and iTunes doesn't detect the device

    Hello,
    brand new Win7 installation, restored iTunes folder and installed latest 10.4. iTunes64 bit.
    Hooked up both my iPad and iPhone4
    Detected new firmware 4.3.4
    and bang, both devices are now stuck into recovery mode.
    No matter I set the iPad/iPhone into Recovery or DFU mode, iTunes will not detect any device for recovery.
    Uninstall/Install iTunes => no change
    The driver will display that the units is detected and in DFU or Recovery mode, but iTunes doesn't detect the device.
    Tried TinyUmbrella etc but no fix
    Any other hint?
    Best Regards
    Uwe

    Place the device in DFU mode (google it) then restore.

  • Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

    Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

    So yu tried all of this:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    If you had then time for an appointment at ther Genius Bar of an Apple store.

  • HT4623 my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ... i have updated all software on the pc and disabled Norton as the

    my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • On a windows 7, ifinally got the Iphone4 setup so i can copy my pictures off of the phone. know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    On a windows 7, i finally got the Iphone4 setup so i can copy my pictures off of the phone. Know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • My iTunes does not list any devices when I plug in my new iPhone to the computer.  how do I get iTunes to recognize my new phone?

    My old  iPhone died, so I just got a new one.  I am hooking it up to my computer for the first time.  The iTunes on my computer doesn't show any devices as being hooked up to the computer when I plug in my iPhone.  Yet my iPhone is charging so I know it is connected to the computer.  Any suggestions on how to get my iTunes to recognize the new device?  Thanks

    Make sure that your music is in the format supported by the iPhone. I use either MP3 or AAC.
    A friend had the same problem a while back. All his music was in the WMA format and is therefore not playable on the iPhone and would not copy. Once he converted his songs to MP3 they copied to his iPhone without problem.

  • I can't sync iphone with itunes via USB, Im using windows 8.1 system, after update7.0.6 itunes was not detect the iphone, pls help....

    can't sync itunes with iphone via USB, windows 8.1 system

    Right click on your device under Portable devices and click on Uninstall and when the uninstaller box pop ups select delete the driver and click OK. Now click on Scan for hardware changes on top of the page and see if you get apple mobile device support driver under USB Devices and if not then disconnect your device from the computer and try to connect it to a different USB port and check also open control panel and select Apple Mobile Device  Support from the List and Click on Repair and check. If still the device is not showing under USB then uninstall the following services from your computer.
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if unable to uninstall ignore and move to next)
    Bonjour
    Apple Application Support
    Restart your computer once after the uninstallation is completed and then download latest version of iTunes from http://WWW.apple.com/iTunes/download
    Locate the iTunes setup file and right click the file and run the installation file as Administrator and let the installation complete.
    Then check if your device gets deteced in iTunes and if still the device is not detecting in itunes then go to device manager and see under Usb if you can see Apple Mobile Device Support Driver and continue with the step. 5 of above given link in my previous post. And if still thedevice is not showing under USB then right click on your device under potable device and click update driver and first check for updates automatically and see under USB if you see the driver now and if not then go back to device under portable device select update driver, let me choose driver from the list, Have disk, browse file in the following location " C://Program Files/Common Files/Apple/Mobile Device Support/Drivers and select usbaapl file and install the same (if you can't find the driver on above location then look for the driver in Program Files(x86) instead of Program files and if you can't find usbaapl then look for usbaapl64 and complete the installation and then restart the computer and check if your device get recognized in iTunes.
    Note: when installing the drivers keep the iTunes closed till the drivers installation is completed.

  • Itunes does not see my device when connected

    As above when I plug iphone in, itunes does not see my device. i have repaired the itunes files. I have deleted all itunes files and re-installed and still no good.
    When I do connect the usb to my iphone the computer bleeps three times in succession.
    Has anyone got any advice as to what to do next?

    Try this... http://support.apple.com/kb/TS1495

  • My iphone 5 is frozen on the screen that shows a cable and itunes symbol.  I can not get the phone to enter DFU mode and itunes does not recognize the phone when plugged in to itunes.  The phone was mid update when it was disrupted....

    I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected.  Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes.  I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success.  ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes..  Please help!

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

Maybe you are looking for

  • How do i turn off apps running in the background with the new upgrade?

    how do i turn off apps running in the background with the new upgrade?

  • Error trying to install LR4

    I am getting the error "Operation could not be completed. (com.apple.installer.pagecontroller error -1.) Couldn't open "Adobe Photoshop Lightroom 4.pkg".

  • How do i put a frameset in the same jsp?

    A simple question to ask, I am adding a menu to the web page, the file is in jsp. I would add some code but i dont see any point in that so if i am wrong please reply back what part you like to see. So far i have the menu part and the main program th

  • Acknowledgement of ACH Payments

    We are currently making non-tax ACH (CT) payments and are about to begin making tax payments via ACH (CCD+ TXP).  However, our Tax Dept. is hesitant because we can't provide them some kind of acknowledgement or proof that the payment was made and rec

  • Adobe flash player when on yahoo messenger for the web

    I don't know if anyone else using the new version on the adobe flash player on yahoo messenger for the web. But it keeps on locking up and sometimes it cause internet explorer to lockup and crash. anyone out there having this as well. This sucks. Whe