HT1725 Dowon loads from store never work.... wasted time and money

Dowon loads from store never work.... wasted time and money

Thanks for reading and thanks for the advice. Perhaps I'll ask them about it next time this problem occurs, although carrying the thing through a mall that is only about a mile away is the least of my worries. I'll do if it is both free (I don't make enough at my job to pay for such a service) and relatively speedy, although I'd hate for them to come over and for the computer to work properly (as bad as that sounds). It'd be a wasted trip and nothing would get fixed.
I'm contemplating videotaping myself performing my "fixes" on it the next time I have this problem.

Similar Messages

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import menu and nothing has changed. I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card. Any thoughts?

The error message probably said "unsupported or damaged"
The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

Mac App Store not working? (Glitching and flashing!)

Mac App Store not working? (Glitching and flashing!)
I was at my friends house, everything was working fine. I went to my girlfriends house, everything was still working fine. Then once I got home, I got back out my 2010 MacBook Pro 15" to use and some pages on the internet looked a little odd. They were all in HTML format and wouldn't go back (Pages such as Skype and Apple's main page). I thought they were just down or being fixed up, but then I went to update my Mac under the App Store. I clicked the App store and a message popped up saying "App Store cannot verify a secure connection with the App Store." The options were "Cancel" or "Continue". I clicked "Continue" so I could update my Mac, but weird enough, the App Store started flickering (strobing; blinking) as seen in this video by someone with the same problem: http://www.youtube.com/watch?v=De8aQZccRvA
I do not know what to do or why this is happening, so help would be VERY nice.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Im in maldives and i been using the singapore store for a long time. and i used my credit card issued in maldives but with a singapore store and its been working well until one day my card expired and i reissued a new card. a different security number onl

i been using the singapore app store for a long time. and my credit card is issued in maldives and it was working well until one day my card got expired so i reissued it again here in maldives.and i was updates my payment methid only my having a new security number.and yet there came an error msg saying my payment is not valid.so now i cant buy any apps
so please help me out.

so adjust your iTunes account settings to reflect the new card...

Serious battery issues, apple support waste of time and money!

My Mac Book Pro 17" has a serious battery issue it holds a charge for a hour or less, and does not always charge. Telephone apple support and all they say is take it to one of there shops to get it tested that will cost me about £40 in train fare and take a day at least. Ive had the Mac since September 2011 i never started using it until late December 2011. A 3 year warranty for what!!!!! And it overheats..... Apple good bye your becoming worse the Microsoft your just making money out of constant yearly updates/releases of your products, Updates which becoming boring!

The thing is you pay for a warranty and unless you live close to a Authrorised test centre etc, then it cost you more in time and money for travel!
I'm really not clear on what you're asking Apple to do. You don't have to go to an Apple store, you can go to any Apple Authorized Service Provider (AASP). Your warranty is still completely valid. You can find them here:
http://support.apple.com/kb/HT1434
The title of your thread says Apple support is a waste of time and money. What would have preferred that they do? If you are too far from an Apple store or AASP, you can let them know that and they will usually send you out a box so you can ship your machine back to them so they can check it out. Of course you'll be completely without your machine during that time.
You're comment contains quite a bit of bashing for something which Apple will clearly resolve. Unfortunately, if you live in a remote area where there are no Apple stores or AASPs and you dont' want to send it in, there isn't anything anyone can do to help you.

Advanced Action works 2 times and stops working

Hi Everyone,
I'm creating a Captivate 4 (4.0.1 Build 1658) presentation of a simple LAN setup with 2 hosts. I have a caption showing setup parameters for the hosts (IP and Hostname) and a dropdown box allowing for selection of which host to configure parameters in the upper right (screenshot below).
My advanced action executes when the submit button next to the IP field is clicked (Host Name will be next once I figure this little issue out). It checks which host is selected in the dropdown widget and assigns the IP address (HostIP) to the respective host.
As the subject states, this works 2 times and then stops working. Here is the code:
Check If ( HostSelection is equal to Host 1 )
     begin
          Host1IP := HostIP
          rdcmndGotoFrame := 20
     end
Or Else
     begin
          Host2IP := HostIP
          rdcmndGotoFrame := 30
end
The rdcmndGotoFrame assignment seems to be the only way I can reliably pause the presentation after the button is clicked. Not sure if this is contributing to the problem or not.
I've done this type of thing before but I can't figure out why this isn't working. Any help would be greatly appreciated.

Hello,
To keep the playhead from moving on, use the expression:
rdcmndGotoFrame = rdinfoCurrentFrame -1
Sometimes the -1 is not necessary, you will have to check yourself. I do not know why you choose the absolute frame numbers to go to. And I do not really catch the issue for the rest.
Lilybiri

HT1766 I loaded the software fix for face time and it wiped out my contacts and photos. can I restore them?

I loaded the software fix for face time and in loading the new software I lost all of my other content (WITHOUT ANY WARNING). This included my contacts, photos, music. The music I can restore and losing the contacts is an inconvenience, but losing the photos is devastating.
Any ideas?

What software fix for FaceTime? What software did you apply?
Did you backup your iPhone before you updated it with whatever update you applied as described in HT1766? If so, did you backup to iCloud or iTunes? Either way your data should be restorable from that backup.

I am trying to log into the itunes store for the first time and it asks me to review my account so I do but every time I get to the bit where you fill in your bank details and address it tells me my payment method was declined and that its not valid?

I am trying to log into the itunes store for the first time and it asks me to review my account so I do but every time I get to the bit where you fill in your bank details and address it tells me my payment method was declined and that its not valid?

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

I am trying to export a pdf to word but the document keeps "loading " for a long period of time and won't complete?

I am trying to export a pdf to word but the document keeps "loading " for a long period of time and won't complete?

Hi Jennee,
You're using the Save As > Microsoft Word command in Acrobat (and what version are you using)? At what point does the status bar in the lower-right corner hang up (Pre-processing, Recontructing, and so on)? What type of content is there in the PDF, and how large is it? Are you having Acrobat run OCR on the file as it converts (you can check this by clicking Settings in the Save As dialog box)? Do you have trouble saving other PDF files as Word documents?
A lot of questions, I know. But I need to know a bit more about the document to determine why it's hanging up on export.
Thanks
Sara

What is up with this err = 9006? is there any solutions, this is ridiculous considering the time and money i'm wasting (mostly the time) i have seen no solutions thus far.

what is up with this err = 9006? is there any solutions, this is ridiculous considering the time and money i'm wasting (mostly the time) i have seen no solutions thus far.

I've found the following on that page for error 9006 :
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Adobe will only work 1 time and it will not open anything after that. I have to unstall it and

I can only get Adobe to work one time and after that I need to unstall it and reinstall it to use it agin.I have Windows 8 aopp.

Hi starjeep1,
Please let me know what version of Reader are you using?
Try repairing Reader by navigating to the 'Help' menu and see if it works for you.

Elements 12 (PC) loaded from cd, organizer works but editor says it is loading, grinds for 20 secs then disappears

loaded Elements 12 (PC), 2 months ago both organizer and editor fully functional. Got message today free trial ran out and i needed to buy it.
Reloaded from DVD, organizer works but editor will not load

Two suggestions: the first one is a workaround. You just have to drill down your program file tree to Adobe Photoshop Elements Organizer and find the .exe file - the one specifically for Organizer, not Elements. Make a shortcut to that file on your desktop and it will open Organizer. The second suggestion resolved the problem altogether for me. I actually called Dell and after working with several different techs over several different days, I talked to a tech in premium support who was excellent. I discovered from them that it is actually a problem with the windows system files. I have 8.1. I went through a "refresh" on my computer which rebuilt all the files. Then reinstalled Adobe as well as my other programs again and Photoshop Elements Organizer works from the standard desktop shortcut.

Anyone still up? I just purchased from the itunes store for the first time, and don't know how to get them downloaded to my ipod.

Sigh.....really late and I want to go to sleep, but I just purchased some Itunes online for the first time, and I don't know how to download them to my ipod. I've never done it before, and it shouldn't be rocket science, but I can't find anything that tells me where to go to download my songs. It said something about check purchases, but I can't even find that screen. I connected my ipod to the computer, and now it says CONNECTED...EJECT BEFORE DISCONNECTING. My BF set up the acct when he bought my ipod as a gift, and as I bought these songs for a special weekend I have planned I can't ask him how to do it. HELP! For some reason the password I always use is not recognized for my account... and since I can't get anyone from itunes without a proper log-in I'm at the mercy of all of you more versed in tech and itunes than I. Is anyone still up that can help me out?

It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes)

Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

Hi all,
   We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
   The following is from the Short Dump (ST22):
   The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
   MAXSIZE (in KB) : 20,000
   Frequency       : 10
   Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.

Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
   clear DATA_PACKAGE.
   loop at DATA_PACKAGE.
      select single /BIC/ZMATERIAL PLANT
         into (material, plant)
         from /BIC/AZCPR_O0400
         where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
         and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
       if sy-subrc = 0.
          DATA_PACKAGE-/BIC/ZMATERIAL = material.
          DATA_PACKAGE-plant = plant.
          modify DATA_PACKAGE.
          commit work.
       endif.
       select single CPR_ROLE into (role_assignment)
                     from /BIC/AZCPR_O0100
                     where CPR_GUID = DATA_PACKAGE-CPR_GUID.
        if sy-subrc = 0.
          select single CPR_BPARTN into (resource)
                     from /BIC/AZCPR_O0200
                     where CPR_ROLE = role_assignment
                     and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
               if sy-subrc = 0.
                  DATA_PACKAGE-CPR_ROLE = role_assignment.
                  DATA_PACKAGE-/BIC/ZRESOURCE = resource.
                  modify DATA_PACKAGE.
                  commit work.
               endif.
          endif.
       clear DATA_PACKAGE.
       endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
Thanks,
Venkat.

Siri NEVER works with relationships and my contact card

Siri works just fine on anything that does not involve accessing my contact card. That is, these commands work:
"Call [Persons's Name]"
"Remind me to buy batteries"
"What's the weather"
"Whats my schedule like?"
But if she has to access my relationships, "sorry, something's wrong" immediately. These won't work:
"Call my girlfriend"
"[Person's Name] is my father"
"Remind me to buy batteries when I get home"
"How do I get home from here?"
Things I've tried:
Toggling Siri off and on
Turning phone off and on
Switching to a new contact for "my contact info"
Removing and re-setting up iCloud
Resetting network settings
And many combinations.

Yes, I read the entire thing. It is dealing with a much simpler problem. I'm well aware that I can edit relationships from my own contact card. And how to adjust Siri's settings to use my contact card.
What it doesn't explain is why, no matter what, Siri will not even make an effort when given any task that would require accessing my contact card (which is where my relationships are stored).
So, yes, Siri knows which contact card is mine, and yes, I'm aware that my relationships are stored in there.
Quick scenario to explain:
Let's set my contact card in Siri's settings to a NEW contact, with no info but a name.
"Siri, [Person X] is my mother"
"Sorry, Something's wrong..."
Or, let's set my contact card in Siri's settings to a full contact card with a home address and a person set as my "mother":
"Siri, how do I get home from here"
"Sorry, Something's wrong..."
"Siri, call my mother"
"Sorry, Something's wrong..."
In any scenario, the text is being properly transcribed. But Siri doesn't know what to do with it.

HT1725 Dowon loads from store never work.... wasted time and money

Similar Messages

Maybe you are looking for