HT1726 iPod says 'connect to power' but after connecting and leaving connected for a while, it is still not responding. Help!
My iPod Nano (3rd generation) ran out of battery the other day. It said 'Low Power' and 'Connect to Power' and now these are just visible on the screen, but barely. I have tried plugging it in to recharge it, but it doesn't seem to register the power source. I can not turn it on/off either as none of the buttons seem to be working.
Is there anything I can do to fix this.
I am having the same issue. I cannot connect at all the the ITunes store. I can do certain things on ITunes, but it is not working correctly. I, too, have followed all troubleshooting instructions, but no success. I can hook up my Ipod and Ipad 2. it is able to download and update applications, but unable to backup on my computer. I hope there are some answers soon.
Similar Messages
-
What's wrong with my iPhone? I put it on the charger it's says it's charging but nothing happens and when I use it while it's charging it starts to die and stops at 1%
Please help
-
Ipod says has no music right after restoring and syncing
It started with my ipod randomly going to menu in the middle of a song. Then it started skipping. And finally it would go from song to song but wouldn't play. So I restarted it while walking to class. When it got back to the menu it said there were no songs. Thinking it had simply been wiped clean, I plugged it into my computer to resync it.
For a while my computer didn't recognize it. When it finally did it asked me to restore it, which I did. I then was allowed to sync it with my library but after this my ipod still said it did not have any music. I repeated this process three times with the same result. HELP!Hello,
I've the same problem with my old G4 running 10.4.11 and iTunes 8.1 (50)
Connecting the same iPod Classic to my Mac Book running 10.5.6 the syncing is working. It looks like it is a iTunes and not a iPod problem.
Offcourse I've already rebuild my iTunes library and restored the iPod but still no changes.
There are also other post reporting the same issue, it's looks like it is connected to the newest 8.1 (50) itues version as i haven't any such issues before.
regards
Lukas -
Chrome works fine. Haven't got desperate enough to try IE.
Friend reports similar problem with her system, which is not connected to mine.* Try this.
* Type in the address bar about:config.
* Accept the warning.
* In the page that appears, in the Filter box, type network.http.max-connections.
* Change the value to 32 (which is probably set to 256 in your case).
* Close the about:config page.
* Restart the browser. -
Internet connection lost after machine sleeps or idle for a while
I upgraded my 24" iMac, 2.16 to a 27" iMac I7. I am now having probles remaining connected to the internet after the machine is idle for a while. I am using a Time Capsule and cable router and have been using the same two devices before the ungrade in my computer. I am also using OpenDNS, again as before. My computer is wired to the TC via ethernet and my wife's computer is wireless. She has no problem. She does not lose connectivity at all on her iMac 24". The drop occurrs time to time after the machine sleeps or sits idle for a while. I know Ive seen various threads about connectivity issues but can't seem to find an answer. Help is appreciated.
I had a very similar problem which I fixed like this:
1) Move the file /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist to your Desktop.
2) Reboot
Snow Leopard will rebuild this file from other info.
This sorted out all my won't connect/loses connection issues. -
Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on
For both
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a 4th generation ipod classic (click wheel) and it's giving me a sad ipod error as well as not mounting in itunes... I hear a clicking inside when it is connected to power but nothing is working. Help!
You won't believe this but a friend of mine (who happens to be an Apple Genius) told me to put a towel or cloth on a sturdy countertop (I know this may sound weird) but hold the selct button (in the center) and menu part of the wheel at the same time until an Apple logo comes up on the screen and then quickly turn the ipod on it's side and wack it on the counter where the towel is so as not to damage anything cosmetically. It seems the clicking is the hard drive reader is stuck and this dislodges it. Mine works now (no clicking) and all seems to be well again. Who knew?
-
on my ipad it says ipad is disabled connect to itunes but i try and connect it to itunes and says i needvto wright the password in the ipad first but cant help please
I have the same problem with my ipod touch ... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
I dont understand why my ipod says it has 8gb but holds 6.36gb capacity and it always says over capacity by 35.4mb and i deleted lots of my apps but it keeps doing the same thing soo annoying . ANYONE KNOWS WHY?!
I had a similar problem and after deleting endlessly...and weeks of frustration I (without even realizing what I was on to) deleted my text messages. I had been letting them add up since it seemed easier to text someone if it were readily available. Needless to say, I ended up with nearly double the space/memory available.
-
Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhatejaHi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support -
Just recently my ipod nano 4th generation's battery seems to be messed up? I plug it into the charger and the ipod says it's charged, but when I take it off the charger, the screen goes black. What is going on and how can I fix it? I'm really sad because it happened so suddenly.
Yes. The battery appears to be shot and in need of a replacement. This can either be done by Apple or a third party repair company.
http://www.apple.com/support/ipod/service/prices/
You can Google "iPod battery replacement" for third party service centers.
B-rock -
my sons iphone 4s is saying "disabled connect to iTunes". but when I try to connect it to iTunes I'm prompted that the phone is locked and needs to be unlocked in order to connect to iTunes. What can I do? b
Hello becca0523,
The steps detailed in the article linked below can help restore access to your iPhone.
iOS: Forgot passcode or device disabled
http://support.apple.com/kb/HT1212
Cheers,
Allen -
This method is exactly how I'm trying to get my music on my new iPod touch, it starts downloading but then stop and says unable to download at this time. What the **** is going on ?
Try going to Settings>Store and sign out and sign back in.
It also could be due to an Apple server problem. and yu will just have to wait and try again. -
there are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...
Do you get an error number? What is the exact message?
Two things to try.
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store.
If that doesn't work, try an App Store reset and then try again.
App Store Reset Learned from Old Toad
There is a contact link.
App Store Support -
I just got Apple TV it is working great but I can't get it to pair with my ipad2, they both search and the ipad says it is discoverable but they just won't connect. All my iCloud stuff has appeared successfully onto the apple TV
My sister in America has paired hers so it means you can use it instead of the remote it is much better when searching for a movie title or song
Maybe you are looking for
-
I imported some photos from my macbook to my iPhone. I no longer need them and I can't figure out how to remove them from my phone. I no longer have the laptop that I imported these photos from. Thanks for your help
-
Server Installation Oracle Wire Protocol Missing
Hello Gurus, I have installed SAP Predictive Analytics 2.0 on Windows Server 2008 64-bit. I couldn't find the standard odbc connection for Oracle like below after installation.I really appreciate any comments.
-
Ole2 error when reading excel from form 6i
APPLICATION OLE2.OBJ_TYPE; WORKBOOKS OLE2.OBJ_TYPE; WORKBOOK OLE2.OBJ_TYPE; WORKSHEETS OLE2.OBJ_TYPE; WORKSHEET OLE2.OBJ_TYPE; CELL OLE2.OBJ_TYPE; SROW NUMBER:=0; COL NUMBER:=0; CELLVALUE VARCHAR2(89); V_RC_1 VARCHAR2(1000); -- TRANSACTION DATE V_RC_
-
FORMS 6i and printing on client
Hi, I've got some FORMS 6i ( in ORACLE APPLICATION 11i environment ). How to send a stream to the local printer where the form runs ? How to do the same thing in network printer ? Does Webutil exist in FORMS 6i ? Thanks a lot. Romeo
-
I just created my own web-site with .mac and iweb. The picture I inserted in my welcome page, however, seems to be quite large because when I go to the web-site it takes a few seconds to load. Not much but enough to be annoying even though I have a f