HT1751 how do you move downloads to external hard drive using lion

How do you move a download from the iMac to an external hard drive?

Then you are using a drive that is formatted for a PC. It's probably formated as NTFS, you can easily check by locating it in a finder Window and type Command I. If you plan on only using it with the Mac then reformat using Disk Utility. Here is a link with some simple to follow instructions.
http://www.cultofmac.com/92845/formatting-external-hard-drives-in-os-x-video-how -to/
If you plan on sharing the drive with a PC then let us know and we can provide some instructions.

Similar Messages

How do you back up an external hard drive with time capsule?

how do you back up an external hard drive with time capsule?

Will time capsule back up the machine and the hard drive that is plugged into the machine?
Yes, if the hard drive with the video files is formatted correctly for Mac
On the Mac with the hard drive connected....click on the Time Machine "clock" icon at the top of the screen
Click Time Machine Preferences
Click Options
Here you will see a list of items that have been excluded from backups
Click the name of the hard drive to highlight it
Click the - (minus) button at the bottom of the list to remove the hard drive from the list of excluded items
The hard drive will now be backed up with your Mac on the next pass that Time Machine makes

How do I restore a failed external hard drive using Time Machine?

I have an external hard drive connected to my iMac that is being backed up with Time Machine. I just realized that should it one day fail and no longer appear as a connected device, I'm not sure how to restore its data to another external drive. When I disconnected the external hard drive (to mimic a drive crash) and entered Time Machine to see if I could verify that the external hard drive was, in fact, being backed up - I didn't know where to find it. Under the Today (Now) information, I didn't expect to see it there as it was no longer connected to the machine. But when I went back a few days, I expected to see its backup appear in the Sidebar. But no!
So - how do I restore a failed external hard drive using Time Machine?
Searches for this information on Google yielded "iffy" results. I'm hoping someone here is able to offer some clear steps to follow. Perhaps I'm missing something silly. Thank you very much!

I came across this discussion after encountering the same problem. Since my internal HD was cose to full I added an additional external HD to my setup. I moved my iPhoto files to an external HD and backed both this external HD and my internal HD up with Time Machine to another external HD. So far the theory. When I wanted to test if this setup worked I noticed that I could only see my iPhoto libraries on the external HD in Time Machine when the external HD was connected to my computer, but not if I turned it off. This led me to search for a solution on the Apple Support Communities discussion board.
The suggestions made Kappy seem right, at least in my experience, in that my Time Machine simply did not back up the external HD until I followed the steps he suggested above. These were the following:
"So, if you want it backed up then here's what you need to do:
1. In Time Machine preferences remove the external drive from the Exclude list.
2. Verify that it is now included with your other drive in the backup list.
3. Do a Backup Now to create a new backup of the external drive."
After doing this, my external HD showed up in the Backups.backupd as a seperate folder. I could clearly see the Time Machine back-up for my internal HD and my external HD. In addition, in Time Machine itself I was able to find the external harddrive by clicking on my own computers name under "Devices". I hope my experience helps to resolve your issue as this discussion board has helped me resolve mine (which I believe to be very similar).
Cheers!

HT201250 how do you safely disconnect the external hard drive?

how do I safely disconnect the external hard drive?

You can also click the little "Eject" button next to the disk in the Finder sidebar, or right-click the disk and choose the option to eject, or select it and press Command-E, all as alternative options to eject the drive.

How to run itunes off an external hard drive using the new itunes

I have windows 8. I installed the new itunes and I want to know how to run itunes off an external hard drive.
thank you for your help.

Same way as before, hold down shift as you start iTunes, Choose or Create a library.
tt2

How do i move itunes to external hard drive to free up space on my imac

I keep running out of space on my imac (320mb)
I have my movies on a Lacie hard drive.
How do I put itunes on the hard drive?
Thanks

iTunes has many components. The two main ones are the application itself (which is what ones means when ones says "iTunes") and the library which is a set of files and folders. I take it you want to move the iTunes library (you cannot run iTunes the application off a non-boot drive).
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
My one hesitation regarding the above is it sounds like you already have some things on the external drive and you have not shared with us the details of your setup. You have already modified itunes from its standard behavior and this can sometimes introduce problems.

HT1557 HOW DO I MOVE THINGS TO EXTERNAL HARD DRIVE SO I HAVE ENOUGH SPACE TO DO UPDATE?

HOW DO I MOVE THINGS FROM MY MACBOOK PRO TO A EXTERNAL HARD DRIVE TO CREATE ROOM FOR MY UPDATE?

BJCOCKRELL wrote:
HOW DO I MOVE THINGS FROM MY MACBOOK PRO TO A EXTERNAL HARD DRIVE TO CREATE ROOM FOR MY UPDATE?
You connect the drive, and if it's not already prepared for use with a Mac, partition it with a Mac OS Extended (Journaled) format and a GUID Partition Table (click the Options button for that). Once that's done, just drag whatever files you want to move to the external and then delete them from the internal.

How do you set up an external hard drive?

how do you configure an external hard drive?

For TimeMachine? or for data, would be basically the same.
Open Disk Utility (located in the Utilities folder).
Connect the disk if it isn't already attached.
In the left side of the Disk Utility window, select the disk you want to use with Time Machine.
Optional: If you want to partition the disk, click the Partition tab and select a layout. Make sure "Mac OS Extended (Journaled)" is selected in the Format menu for the partition that will be used for backups. Click Apply.
Click the Erase tab.
Optional: If you want to securely erase the disk, click Security Options to configure, then click OK.
Click Erase.
http://support.apple.com/kb/HT1427 - TimeMachine Basics
The choice for an external drive, USB3 or not, the type of drive in the enclosure, probably the brand or make of the external drive (Western Digital, OWC, Seagate) is the most important choice and lot of options.

How do you transfer pictures from external hard drive to imac

I am a PC user crossing over to the iMac. I want to move my pic on an external hard drive to the iMac. Tried clicking and dragging, but didn't take....what gives?

If you can read the external drive then it must be formatted acceptably for the Mac...if you have the pix in one folder, right click the folder, or cntrl-click, copy, then click the folder on the internal drive where you want to copy the pix and right click, or cntrl-click, and paste. Should work like a PC in that respect.

How to find movie file from external hard drive in imovie?

i shot 29 gig of video on the road. i imported it into my macbook to the desktop. then i drag and dropped it into an external hard drive. now i have since dragged and dropped the file to my imac at home to work with it in imovie, but imovie cannot find any mpeg or any such movie file. i then tried to put it back to the canon hg10. after i plugged in the canon, i dragged the movie folder to the canon and it imported 29 gig. but the canon does not show any new movie files in the video mode. when i open import options in imovie, no new movies appear. any ideas?

For iMovie to see your file, it must be either on the internal drive, or it can also be on an external drive that is formatted as Mac OSX Extended (Journaled). (Not FAT32).
For the internal drive, your clips must be stored in a folder inside the Movies/iMovie Events/ folder.
For the external drive, your clips must be stored in a folder within the iMovie Events folder at the top level of the drive. Move your files there and then start iMovie, and it should see them.
Message was edited by: AppleMan1958

How do I password protect the external hard drive used for Time Machine backup

Can anyone help me to put password protection on the external hard drive I use to Time Machine backup my iMac internal hard drive? I use Snow Leopard 10.6

I think that was FileVault 1. Starting with Lion (10.7) Mac OS X uses FileVault 2, which is whole disk encryption.
Based on complaints seen in these forums, I would say FileVault 2's only complaint has been when people forget their password/encryption key (it seems an encrypted disk does prevent anyone without the password from accessing the data, including the real owner). Otherwise it does not seem to be causing any serious issues. Your Mileage may vary and objects are closer than they appear in your side view mirror (standard disclaimer). Of course this is all academic while you are using Snow Leopard (10.6).
There are other whole disk encryption packages available, such as PGP Whole Disk Encryption, HOWEVER, I would not advise it for your Mac OS X boot disk, as it has been known to be a problem when you try to install operating system updates or upgrade to a new version. NOTE: I have not seen PGP Whole Disk Encryption discussed much, ever since FileVault 2 came along.

When/how do you move files off of Hard Drive to make new room.

Maybe this is simple; I understand so far that you can choose the Library folder for iTunes and that that is the source of all songs, album cover art, everything that iTunes needs to display all the information for tunes. Please correct me if I am wrong on that.
When the directory fills up to the point that it is taking over your startup drive, then the iTunes library folder can be moved to an external backup drive and iTunes can start up fresh, empty, and ready to receive new songs. Also, Please correct me if that is not correct.
How many songs do you contain in iTunes before you consider it is too unwieldy and time to start fresh?
I've never done this before, new first-time iPod user here, and would like some pointers on how to handle this.
Thanks In Advance,
Ken

When the directory fills up to the point that it is taking over your startup drive, then the iTunes library folder can be moved to an external backup drive and iTunes can start up fresh, empty, and ready to receive new songs.
You can move it but you do not need to "start fresh".
Just move the folder to the external drive and use it for everything.
No need to use the internal drive.
1 Quit iTunes.
2 Move the entire iTunes folder including music to the external drive.
3 Restart iTunes holding (Shift-Windows, Option-Mac).
4 Select Choose library. Select the library in the folder you just moved.
5 Move the old iTunes folder to the trash but do not empty it.
6 Restart iTunes normally and verify the songs work. If they do, empty the trash.
How many songs do you contain in iTunes before you consider it is too unwieldy and time to start fresh?
Over 100,000 songs and it will start to slow down.

How do i move photos to external hard drive for use with iphoto 11

My hard drive is full. I have a Lacie 3 TB external formatted for Mac Journaled. I want to keep my photos and other iPhoto 11 media on the external. Should I just move the iPhoto library to the external or some other way? For iTunes, I moved the iTune media folder location and copied my existing iTunes media folder over and deleted the old after telling iTune to go to the external drive folder.
I don't want to point iPhoto to the new location every time I open it. Any better way or just move the iPhoto library?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

How do you format an NTSF external hard drive for use with Mountain Lion

I'm switching over to Mac from PC, and have an external NTSF formated hard drive I regularly use. I understand from the forum the initial file transfer should be no issue, but for ongoing use of the HD, does it need to be formated to something other than NTSF... and if so, to what and how.

Do this when you're ready:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

How do you boot from an external hard drive if...

Thanks in advance to anyone who can offer any advice. My 24" IMAC suddenly had hard drive ****. After much investigation it has been determined that my internal hard drive has bit the dust. Instead of taking the IMAC apart and replacing the internal drive(which I know a bit about and also could get help doing)can I just replace it with an external drive and load the OS on that and boot from there? If so what exactly, step by step, would I need to do? What are the disadvantages of doing this? If this is possible it seems like an easier solution than replacing the internal drive.
Again, thanks for the help.
Bill

easybpw wrote:
can I just replace it with an external drive and load the OS on that and boot from there?
Yes, but it's not recommended for long-term use.
If so what exactly, step by step, would I need to do?
First, make sure the drive will boot a Mac. Most will, but some won't. If it's a Western Digital, check here: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1787. But note the disclaimer that they don't support it +*at all.+*
If you're reasonably sure the drive is capable of booting your Mac, you need to format it. Start up your Mac from the Install disc (insert it, and hold the "C" key while starting up). After selecting your language, select Utilities, then +Disk Utility+ from the menubar.
Select the drive, select the top line (with the make and size), click the Partition tab and select 1 Partition from the the pop-up menu under +Volume Scheme,+ unless you need more than one.
Give it a name under +Volume Information,+ and select +Mac OS Extended (Journaled)+ for the Format unless you're certain you need Mac OS Extended (Case-sensitive, journaled). Click the Options button below the box, and select GUID (that should be the default, but make sure), and click the OK button, then Apply. That should only take a few moments. Quit Disk Utility and you’ll see the Utilities menu again.
Quit that and proceed with the installation to the new drive. When done, I think it will reboot automatically from the external; if not, start up while holding down the Option key, which will give you the +Startup Manager,+ where you can select the desired drive.

HT1751 how do you move downloads to external hard drive using lion

Similar Messages

Maybe you are looking for