HT1752 cannot load itunes get following  message "i tunes application cold not be opened. An unknown error occued (13014)

Cannot get i tunes to load get following mesage "itunes application could not be opened. An unknow error occurred (13014). How do I fix this?

Suddenly I have this same problem.  iTunes was running fine w/ updates and Mavericks as of this morning at 9am.  Now it wont launch at all and I cannot even create a new library. 

Similar Messages

  • The itunes application could not be opened. an unknown error occurred (1301

    I launched iTunes 9.0.1 today and got this error:
    "The itunes application could not be opened. an unknown error occurred (13014)"
    An archived tip on the iTunes for Windows forum that suggested deleting the iTunes Library Genius.itdb. That didn't work, I also had to delete iTunes Library Extras.itdb. (For the record I renamed them instead of deleting, but the original post suggested deleting).
    Anyway, I thought I'd pass that on in case anyone else experiences this problem.

    I had the same error and I keep my iTune folder on an external drive due to size. I tried to create a sub-folder to temporarirly hold the itdb file(s) and give it a try. The system wouldn't let me create the folder, at which point I remembered I had left my mac on but unplugged to find the battery drained in the morning. Upon plugging it in, it came back but then told me I hadn't exjected my external disk. So, I figured there might be a correlation. I tried to eject the disk and it wouldn't let me though no programs were running. So, I went ahead an chose to "Force" the eject via the option it presented me. On the un/re-plugging the disk, I tried to created a subfolder and it worked. Before moving any files to it, I tried starting iTunes again and voila, it worked. So, I suspect the comment above about files being locked is what bit me. Hope this helps...

  • 'The itunes application could not be opened. an unknown error has occurred'

    Could someone please help me, i recently had to restore my comouter to a previous date and due to this i had to reinstall a few programs along the way. Now unfortunatley itunes is not being co-operative, ive uninstalled it and then reinstalled with no luck. Each time i get to the end of the installation and tries to open up i get this message 'The itunes application could not be opened. an unknown error has occurred (-200)'
    I would appreciate any help!
    thank you

    Could someone please help me, i recently had to
    restore my comouter to a previous date and due to
    this i had to reinstall a few programs along the way.
    Now unfortunatley itunes is not being co-operative,
    ive uninstalled it and then reinstalled with no
    luck. Each time i get to the end of the installation
    and tries to open up i get this message 'The itunes
    application could not be opened. an unknown error
    has occurred (-200)'
    I would appreciate any help!
    thank you
    Ah not to worry i percievierd and managed to figure it out. Thanks to anyone that may have looked at my question!!

  • Itunes application could not be opened. an unknown error occurred (13010)

    Using iTunes 8.
    Get this error when i try to open iTunes...itunes application could not be opened. an unknown error occurred (13010)
    It just shows that it tries to run in the Processes tab in the Task Manager. I get the error then the pocesses stops.
    I've followed all the instructions in the attached link but with no luck:
    http://support.apple.com/kb/TS1421
    I created a new user account and iTunes opens fine...
    Can anyone help.??

    I too am having the same problem. I have followed the above advice - I followed this advice http://support.apple.com/kb/TS1421 to no avail. For what it's worth, It appears to be isolated to my user account. I also tried uninstalling and deleting all apple software including the itunes folder in my music folder plus deleting the registry keys before reinstalling. I also tried to move th Genius files onto my desktop as per the above suggestions. Any advice?

  • I am getting the following error message - the itunes application could not be opened - an unknown error occurred (-50). Help!? It won't even open up.

    I reinstalled iTunes because it stopped opening up and now I'm getting this error message when it refuses to to open. Help?

    If you right-click iTunes and Show in Finder, is it located in the Applications folder?
    Try trashing the iTunes plist files from ~/Library/Preferences/ and relaunch iTunes (all of the fies that have com.apple.iTunes in the name).
    If that doesn't work, try following Apple's document -> Removing iTunes for Mac OS X.
    WTH.

  • TS3212 I cannot install iTunes 10.6.3 on Windows 7 (64 bit). I redceive the following message - "The installation package could not be opened..." Tried opening in safe mode - no luck. Anybody have a solution?

    I cannot install iTunes 10.6.3 on Windows7 (64 bit). I keep getting the following message: "The installation package could not be opened. Verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid Windows installer program." Anybody have a solution?

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?thanks jake

    i am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?
    thanks jake

    Hello tcampbell1549,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Have a nice day,
    Mario

  • I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

    I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

    Try removing the Genius database.  In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

  • I have an apple 3g, tried to update it to 4.2, but it wasnt successful, then they asked me to restore it .. to which im getting an error message of "the iphone could not be restored an unknown error has occured (error 1015), any solutions?

    i have an apple 3g, tried to upgrade it to a 4.2 version, (previously it was 4.1). it wasnt successful, the computer asked us to restore it to the version which was last operational, and while restoring an error message appeared "the iphone could not be restored, an unknown error occured

    "This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."
    Taken directly from this article http://support.apple.com/kb/TS1275.
    Plug your iPhone into iTunes and update it to the latest supported version, which is 4.2.1.
    - Greg

  • Problem! I just copied my extern hdd to finder and tried to open my files when I get the message: "The Map "Pictures" can not be opened since you don´t have authority to  see it´s contents! What??? No one else has access to my computer....

    Problem! I just copied my extern hdd to finder and tried to open my files when I get the message: "The Map ”Pictures” can not be opened since you don´t have authority to  see it´s contents! What??? No one else has access to my computer....now I can´t open my 300 Gb on my hdd in my Macbook Pro. Help?

    I've had this happen a few times before. What I found works is repairing the permissions. To do so click on go and then to utilities. click disk utilities. In disk utilities select the drive and click repair permissions. It may take a little time but try accessing after that.

  • HT201210 what should i do when message say the ipad could not be restored. an unknown error occured (2003)

    what should i do when message say the ipad could not be restored. an unknown error occured (2003)

    http://support.apple.com/kb/TS3694#error3194
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • TS3694 hello out there ! am trying to restore my ios, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down f

    hello good samaritan out there ! am trying to restore my ios for for i phone 3G, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down for a we

    mazunzo tembo wrote:
    "the iphone could not be restored, an unknown error occured(1015).
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • TS3694 i forgot the password of my  iphone 3g and when i try to restore it it shows the message"my iphone 3g could not be restored an unknown error occurred(1015)" can any body help please..

    i forgot the password of my  iphone 3g and when i try to restore it it shows the message"my iphone 3g could not be restored an unknown error occurred(1015)" can any body help please..

    This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015

  • Cannot open Pages documents that I've worked on.  I open a new document, work on it, then save and close it.  When I try to open the document again, I get the following message: The document "[name]" could not be opened. The file isn't in the correct form

    I cannot open Pages documents that I have worked on and saved.  When I try to reopen Pages documents that I've saved, I get the following
    message:
    "The document “[name of document]” could not be opened. The file isn’t in the correct format.
    The file might be corrupted, truncated, or in an unexpected format."
    I have downloaded the latest update to iWork, but that doesn't help.
    I use Mac OSX 10.6.7
    I am using Pages '09 version 4.0.5 (852)
    If anyone can help, I would greatly appreciate it.
    Best regards,
    New York Mac User

    A few general trouble shooting tips that may apply here:
    1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
    1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
    2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
    Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
    Restart Pages and attempt to open one of the files.
    If all is well, Trash the plist file and empty the Trash.
    If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
    Regards,
    Barry

  • Every time I try to down load Itunes I get a message saying installation package could not be opened . Verify the package exist that you can access it Contact vendor

    Everytime I try to download iTunes I get this error message saying, "This Installation package could not be opened. Verify that the package exists and that you can access it.or contact the vendor to verify that this is a valid windows Installer package.

    I had this same issue occur today during update, searched and finally tracked to problem with windows registry. Used online version of windows registry tool "Fix It" (can also download portable version for offline check. I selected Apple updater utility from list to fix and it did it's thing. Returned to my downloaded 10 iTunes adn isntalled perfectly fine.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Good luck. Worked for me back up and running.

Maybe you are looking for

  • Error fetching data from a foxpro db using Oracle Gateway for ODBC

    Hi. I have an 10.2.0.1 database an a 11.2.0 Oracle Gateway for ODBC installed and configured. The dblink test works fine, I can connect with the foxpro database because if I execute desc centros I can see the columns of table centros. The problem com

  • MANUAL DEPRECIATION FOR GROUP ASSET

    dear sap gurus i want to post manual depreciaiton to an asset which is attached to a group asset could anyone tell the ways to do it please regards srini

  • Using hd display

    would it be possible to replace the lcd with say, the display from Macbook Pro HD, and pulling the wires from LCD to the mini-VGA connector with the correct adapters? Is it possible to get 1920x1200 through it or only 1440x900 since it's mirrored?

  • Refresh EUL in Oracle Discoverer Administrator using command line

    Hi there! I wonder if there is a way of refreshing the EUL business folders of Discoverer Administrator using a command line, so that it could be done through a batch file process. Many thanks in advance

  • How to use AV conf with third party

    One of our partners uses a lifesize video conferencing unit. We use lync internally for IM and currently have an edge server being deployed for external access. I am wondering how I dial av.partner.com from a lync 2010 client to have an AV conference