HT1752 Seeking a copy of the boot system disk for Macintosh 512k..

I recently acquired a Macintosh 512k at an estate sales, minus the boot system disks..I'd need someone to make a copy of, or if you have a spare copy, I'll pay you for it.. Thanks~ Vern

Hi,
http://www.hardwaresecrets.com/printpage/How-to-Generate-Floppy-Disks-for-Old-Ma cintosh-Computers/1713
http://rescuemyclassicmac.com/buyadisk/buyadisk.html
http://earlymacintosh.org/disk_images.html

Similar Messages

After recording text using the dragon dictation app, it is converted, it can be copied to the iOS system clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

after recording text using the Dragon dictation app, it can be copied to the iOS systme clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

You need to do a long-press in any data entry field, then select Paste.

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

What is the boot up time for Mavericks using a 2.4 Ghz 13" MacBook Pro

What is the boot up time for Mavericks using a 2.4 Ghz 13" MacBook Pro

This will vary depending on what HDD/SSD option any system has been specked to, whether from apple or upgraded afterwards (depending on upgradable model)
I have a late 2011 2.4 i5 13" upgraded to 16Gb ram and a Samsung 840 Pro SSD and my install of Mavericks boots in around 15 seconds. This is actually about the same as my 2008 core2duo macbook booted snow leopard with a Samsung 840 (non pro)
You may find a system with less ram actually boots marginally quicker, but this would be marginal.

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

What are the minimum system requirements for GB 4?

What are the minimum system requirements for GB 4? I did search this forum but wasn't able to find a direct answer.
I'm running version 3.0.4 successfully on a lowly G4 733 but I suspect this is as far as I can go.
I'm updating to iDvd'08 and was also wondering if I can safely update to GB4 or not (from GB 3.0.7) on a G4 733 mhz Digital Audio. Any help would be sincerely appreciated. My guess is that I cannot but I'd like to confirm prior to attempting any further updates in GB.

I try my best to play it safely; always. And you were right, everything worked on the ext. FW HD flawlessly ...... truly amazing software!
(I did happen to check the activity Monitor w/in Utilities and it showed GB4 using about 60-67% of the CPU on a G4 733 ..... I'm assuming this is normal).
Click Here
Not sure if there's a correct order to opening these apps as there has been in former versions of iLife ..... however, this (as shown above) is the order in which I opened all apps, and all worked well.

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts;

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

What are the operating system requirements for installing a trial version of lightroom 4?

what are the operating system requirements for installing a trial version of lightroom 4?

http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Mylenium

Please, 1. Please set the Receivables system options for this operating

hi
please i have this error:
1. Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
can some one help me!
thinks

think you a lot mister.
i am not the administrator of the base, our base administrator is not here for the moment, i have just the count apps and sqplus to change parameters.
and the request :
select fnd_profile.value('SO_ORGANIZATION_ID') from dual ;
gives as result : 101!
think you for all!.
Message was edited by:
brahim37

OS does not meet the minimum system requirements for this installer. 10.6.0 is the minimum required

How do I get my software? This is the message I am hitting before my download will complete:
OS does not meet the minimum system requirements for this installer.
10.6.0 is the minimum required for installation.

Hi,
May I know what are you trying to download ?
What is the MAC OS version you are using ?
It seems you are trying to download an application which needs atleast 10.6 MAC version
I think you are using lower version of MAC, let us know the version of your MAC , in order to help better .
To check the version : click on Apple Button on top left
select about this MAC, you will get to know the version over there.
If its something 10.5.x , then you need to upgrade your MAC in order to install that application which needs 10.6 MAC
Thanks,
Baljeet

I'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

i'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

Page 5, step 2, #2, 2nd bullet.
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.7.pdf

What are the ideal system requirements for Adobe Captivate?*

What are the ideal system requirements for Adobe Captivate?* In order to ensure it runs at a good speed.

I don't know about ideal, but I'm using an Intel Core2 Duo, 3.16ghz, 3.46gb ram, winXP Pro SP3. This is an HP branded PC, it uses the onboard Q45 video.
I rarely have any problems that I haven't caused myself (having too many applications open while I work).
hope that helps.

What is the operating system available for Macbook Dual core Intel processor system

what is the operating system available for Macbook Dual core Intel processor system

Exactly what model? Do you really mean the old MacBook with the dual core processor or do you mean one using a Core 2 Duo processor?
The last OS X that runs on a dual core Mac would be:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.

Hello, Can you please advise me as to the recommended system requirements for Adobe CC for Photoshop, Illustrator, InDesign, and Dreamweaver (all 4 programs). I'm hoping this is summarized somewhere rather than making me look up and compare all four. I'l

Hello,
Can you please advise me as to the recommended system requirements for Adobe CC for Photoshop, Illustrator, InDesign, and Dreamweaver (all 4 programs). I'm hoping this is summarized somewhere rather than making me look up and compare all four. I'll be using a windows based PC, and will need a graphics card that can support at least two monitors.

Hi julir
check this System requirements | Photoshop
why photoshop demand?cause photoshop having 3D feature, it mean need high spec,,so if you can run photoshop cc to run ai,indd and dw is posibilty
regards
Deto

HT1752 Seeking a copy of the boot system disk for Macintosh 512k..

Similar Messages

Maybe you are looking for