HT1766 Can icloud automatically back up when it is not plugged in to a power source?

Can icloud ever automatically back up without it being plugged in to a power source?

No.
From the Storage and Backup Screen:
"Automatically back up… when this iPhone is plugged in, locked, and connected to Wi-Fi."

Similar Messages

  • How can I reboot my Ipad when I do not have access to the power off screen?

    My device slide off my couch while in its cover. IT was working afterwards, for about 5 min. I sat it down while I took something out of the oven and was back maybe 5min. or so later. When i try to access it, all I see is a black screen. I cannot unlock it or even power off. How can I reboot it without the power off swipe ?

    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reboot/Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory

  • HT1766 iCloud Backup shows this iphone is currently being restored and will automatically back up when it is done. My iPhone has been showing this for a long timen sene. be

    iCloud Backup shows this message
    iphone is currently being restored and will automatically back up when it is done.
    My iPhone has been showing this for a long time.
    is this because my old phone is still Wifi active?
    This is a new phone all contacts and other stuff seems to have downloaded.

    this has nothing to do with your old phone (connected to wifi or not). It has to do with your wifi and new iphone. check wifi connect/restart router. then restart iphone.

  • HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

  • Can you automatically start programs when you switch on your imac

    can you automatically start programs when you switch on your imac

    Yes, go to: Apple / System Preferences / User Groups / Login Items and add the Application to the list of things automatically set to start at login.
    However, you should limit it to those that you need or use, because adding a lot will needlessly slow down your startup time and use more RAM.
    Message was edited by: den.thed
    Oop'  late on the draw again, glad your question is answered.

  • When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect.

    When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect on the phantom playlist that shows up on the PC when I plug in the iPhone to the PC. I cannot manually move songs or playlists from the PC to the iPhone
    Help greatly appreciated.

    Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

  • When I am on my home wifi I can send e-mail.  When I am not on my home e-mail but on a wifi network or using the 3g network I cannot send e-mail.  HELP HOW TO FIX.

    When I am on my home wifi I can send e-mail.  When I am not on my home e-mail but on a wifi network or using the 3g network I cannot send e-mail.  HELP HOW TO FIX.

    I know this question is a few years old now, but I recently found myself having the exact same issues;
    Using my iphone or ipad at home created no problems at all, but I couldn't send e mails when away from my home network.
    I recently switched broadband supplier at home and set up a new e mail address, then my problems began!
    I openly admit I'm not great with technology and, to be honest, some of the answers provided on these forums confuse me more than the questions!
    But this worked for me:
    I went along the lines that the fault wasn't with my idevice but possibly with the broadband provider (in my case Plusnet) so I contacted their customer support.
    They referred me to the set up process shown below;
    From your home screen press Settings.
    From the setting menu, choose Mail, Contacts, Calendars followed by Add Account…
    From the Add Account… menu choose Other.
    Fill in your Full Name, Email Address, Password and Description and press Next.If you need help with these, there's more detail underneath the screenshot.
    Full name: Enter your name (or the name you'd like people to see when you send them email)
    Email Address: Enter the address you're setting up, this could be a Plusnet address ([email protected]) or a hosted domain address ([email protected])
    Password: Enter the password for your email address (I don't know what this is)
    Description: Enter a useful description of the email address you're setting up (e.g. Mum's email). You can put whatever you want here
    Press Next to continue.
    More settings will appear. Some will already be filled in.Enter the Incoming and Outgoing Mail Server details and press Next. If you need help with these, there's more detail underneath the screenshot.
    IMAP/POP This will default to IMAP - it's up to you which one you want to use (I don't know what to choose)
    Incoming Mail Server settings
    Host Name: For IMAP this is imap.plus.net - for POP, this is mail.plus.net
    User Name & Password: Enter the username and password for the email address you're setting up (I don't know what these are)
    Outgoing Mail Server settings
    Host Name: relay.plus.net
    User Name & Password: These are optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.Enter the username and password for the email address you're setting up (I don't know what these are)
    When you're finished, press Next.
    If the box shown below appears, press Yes (you may need to do this twice).
    After a minute or two, your email address will be set up and ready to use.If you chose IMAP when setting up you’ll be able to choose whether you want to use Notes (if you chose POP you’ll be taken back to the settings screen from step 2). Press Save when you’re done.
    That's all you need to do. To start checking your email, go back to your home screen and press Mail.
    Now I fully understand that it may be different for each broadband provider but the processes must be similar.
    The key appears to be in setting up the outgoing message server settings in step 5. Where it says "optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.
    http://www.plus.net/support/email/setup/ios-setup.shtml#pagetop
    Where it says "we recommend" I think it should read "you must fill these in"
    I went back to Settings - Mail,Contacts, Calenders - click on the offending account and click on the account shown.
    Under OUTGOING MAIL SERVER click on the server, in my case relay.plus.net, and click again to show the details. make sure you enter your user name and password and after a few seconds the account will verify and show a load of ticks.
    I tried this on my phone this morning while on 3G only. I sent an email to another of my addresses and immediately got the response that the message couldn't be sent as the recipient was rejected and the message had been placed in my Outbox. I followed the above steps and immediately heard the satisfying "whoosh" as my mail was sent. 10 seconds later another satisying beep as my e mail arrived at my alternate account.
    Hope this helps anyone else with a similar problem.

  • My Macbook is not playing sound unless i have headphones in. The light in the headphone plug stays on even when they are not plugged in. How can i fix this?

    My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?

    You might need to clean the headphone port (I was in the same situation and this worked for me).  Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in.  After cleaning the issue was resolved.

  • TS3772 this iPad hasn`t been backed up in 47 weeks.Back ups when this iPad is plugged in, locked,and connected to Wi-Fi

    this iPad hasn`t been backed up in 47 weeks.Back ups when this iPad is plugged in, locked,and connected to Wi-Fi

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I can't change the volume when I have earphones plugged in.  any ideas?

    I can't change the volume when I have earphones plugged in.  any ideas?

    Hello Pamela,
    What happens when you try to change the volume with the headphones plugged in?  Anything?  Does this happen with every pair of headphones you try?
    Maybe try resetting the Nano.
    http://support.apple.com/kb/ht1320
    B-rock

  • I can't get on line when the message "Blocked plug-in" appears.

    I can't get on-line when the message "Blocked plug-in" appears.   How do I get rid of this?

    If you actually can get online on some websites in Safari, but are unable to view the websites that depend upon the use of Adobe Flash Player, such as YouTube, then the problem is an outdated Adobe Flash Player version, and you need to update it.
    , System Preferences, Other, Flash Player, Advanced, Updates, Check Now
    (This screen shot is from OS X 10.8.5, so it might appear different than your OS X 10.6.8 screen, and a different release of the Flash Plugin might be installed.)

  • Can I getting back to Premiere Pro CC (not 2014) ? CC 2014 it's very bad

    Can I getting back to Premiere Pro CC (not 2014) ? CC 2014 it's very bad
    I hope that can possible or I have to change of program. CC 2014 was disappointing

    See here:
    How to Access, Restore or Update to Any Version of Adobe CC Apps | ProDesignTools

  • Am I the only one who can sync without plugging in to a power source ?

    After upgrading our 2 iPhone 4's to iOS5, and with Lion 10.7.2 I have found I can sync to iTunes WITHOUT them being connected to a power source.
    Am I missing something here ?  When we open up iTunes, the phones show up in the sidebar, and when we press sync, then they sync .... every time, no problem.

    OK, that's great .... I must have misread things. I could have sworn I saw a line which said that the phone neededto be plugged in to a power source (or so I thought).
    Now I've read it again, I believe that just applies to the automatic syncing.  Excuse me for wasting your time.
    Anyway, everything seems to be working fine with both phones.

  • How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated  you are using Lion.
    1. Did you download and install the 5.6 utility..?
    I said to do it.. you never said yes.. I did that.
    Please do it. .. you will get no place before you do.
    2. Did you bridge the TC.. ?
    If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
    3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

  • Iphone alarm doesn't work when the phone is charging but works fine when it is not plugged in, any reason for this?

    Recently my alarm hasn't been going off on my phone when it is plugged into the charger. This is a problem as i have work most mornings and have been late. When it is not plugged in the alarm works. I know it would mae sense to charge it before i go to sleep, take it off the charger, set the alarm then wake up but was just wondering if there was any reason why I might be experiencing this issue?
    Cheers

    This is something peculiar, normally that doesn't work that way
    when did this happen? if it just happened, then something probably went wrong with either the software or the hardware
    do charge the proper way, and see if it happens again
    or try completely draining the battery, and charge it to 100% and see if its gonna solve the issue with the alarm

Maybe you are looking for

  • About the crash on quit with After Effects CS4 on Mac OS...

    This post on Jeff Almasol's blog gives some information about an issue with ScriptUI scripts that can cause After Effects CS4 on Mac OS to crash when you quit the application: about the crash on quit with After Effects CS4 on Mac OS... Trish and Chri

  • Question About Reinstalling Elements 11

    I have a brand new laptop that I purchased specifically to edit photos while on the road.  The first thing I did when I received it a couple days ago was to load Elements 11 (the second computer I loaded this version onto from disc).  The second thin

  • Applet not loading in client

    hii i am able to load my applet on the local computer. but when i put it in the server and try to connect as a client from different location if doenst load.. the applet connects to a database and fills a drop down. i have many class file including o

  • Help need in keylistener with image

    Hi experts, How to add the keylistener to a scrollpane for an image update or add image to the scrollpane. The solution will not using swing. Please send an example with a source code. Thanks in advance.

  • My Hotmail account on iPad Mini is not fully syncing.

    I get new emails but if I delete items via my PC or iPhone I still see them on my ipad. I need to delete each item again.