HT1766 cant back up 3g iphone session cant be made when try to back uo
can't back up my 3g phone on itunes to get it synched with new phone
@operea724 & DebyP
I figured out a somewhat simple fix for this problem...I tried searching the internet for solutions, and it took me a couple of trial and error tests before winding up with this very simple solution. It also fixes those with problems with a blank iTunes store after updating to iTunes 10.5.
Resetting the winsock process will fix it. And how to do it:
1. Close all running programs. Then, click on Start Menu -> All Programs -> Accessories -> Right Click on Command Prompt -> Click on Run as Administrator (or simply click on Command Prompt if you've got UAC disabled)
2. Enter the following command line in the window: netsh winsock reset
3. Press Enter and then it will ask you to restart your computer. Do so. This should fix the CPU Usage and blank iTunes store problems.
4. Once done restarting, check your Task Manager whether the situation changes or not. If it still persists, try repeating the process...if it still doesn't work...well I guess that's the time that one should contact a local Apple store and ask for a fix...=)
So I hope I was able to help with this response...=)
Similar Messages
-
I cannot complete my iphone configuration after sofware update, when i connect to itunes i keep gettin a try again later message
That's usually a sign that your phone was hacked/jailbroken, and iTunes has detected such, errored out, preventing your phone from activating. Since Apple does not support hacking/jailbreaking, that's what happens, by design.
We can't help you here, as Apple owns this forum. You'll have to go elsewhere. -
IPhone shows up in itunes when try to sync, disappears
iPhone 5s, iOS8.2
Plugged in, on same wifi network
Device shows up in itunes. When I added a playlist for my phone to sync and clicked sync, it said "looking for device," then that dialogue box disappeared and nothing happened. Then an error message displayed:
My device was no longer recognizable by iTunes wifi sync for about 5 minutes. As I was typing this, they became recognizable again, only to give me the same error.Hi deuceduce,
Thanks for participating in the Apple Support Communities.
It appears that you're syncing your iPhone 5s with iTunes on your PC. You're using Wi-Fi, but the error message reports that iTunes can't find your iPhone.
There are several steps that can be used to troubleshoot this situation. I'd recommend the method outlined in this support document:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing - Apple Support
This article will take you through various troubleshooting steps that can help.
Sincerely,
Jeremy -
sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant restore... please help me...
See Here...
iOS: Not responding or does not turn on
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430 -
On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when I make/receive calls using internet-based / native apps like viber or skype, people can hear me just fine. I have tried recording my voice using voice memos - this works. And have already tried different SIM cards but the problem persists.
I have taken my phone to an authorized Apple service center, where they restored my phone to factory settings, but still facing the same issue. They service center directed me to Apple Customer Care Hotline, where I have now spent 3+ hours explaining my issue and yet no one can resolve it. The easy answer if to replace the phone - and since it is out of warranty, I am expected to pay for it.
Additionally, the customer service has been so rude and confrontational that it has completely changed my view of Apple and its customer focus. I am a disappointed and angry customer today - people would be surprised to hear just how rude customer service was including making statements such as "Apple doesnt make infallible products, that's why warranty is needed for our products" and that "every product undergoes a problem at some stage, so do ours!" There goes whatever confidence I had...
My concern is simple - if no one at Apple and / or its CS hotline is able to address my issue comprhensively and keep telling me that they have never encountered a precedent before, then with what right can they expect me to pay for a replacement?! I am NOT here to fund Apple's research into their product faults and manufacturing.
And even though a customer is out of warranty, is it too much to expect an Apple product to work well for at least a 'reasonable' period of time. My phone is less than 18 months old and has been facing this issue for the past 2 months - surely the longevity of Apple products is more than 18 months!
Just a sad sad day for an Apple customer, compounded by unjustifiably rude and aggressive staff. And still no resolution to my problem.I am having the same issue - with my last 2 iPhone 4's. My first handset each time I was on a call wether it was up to my ear or on loud speaker, the call would automatically mute even though the mute button wouldn't show up as highlighted. Pressing the mute button on and off during the call doesn't fix it either. I rang Apple and asked what some of their trouble shooting solutions were. I got told that it might be a software issue and to install the latest software update. This failed. I then got told to uninstall the software on the phone and do a complete restore. This also failed. After trying the troubleshooting suggestions, I took the phone into my provider and they sent me out a new phone within a week under warranty claiming it was a hardware issue and probably just a "glitch" with that particular phone. This was not the case....
After receiving my second iPhone 4, I was hopeful that it would work. For the first couple of days, making/receiving calls was not an issue. Until after about a week, the same problem started again. In one instance I had to hang up and call back 4 times and the call would still automatically mute after about 5 seconds. Also on the second handset, the main camera located on the back of the phone has red and blue lines running through it and can't take a decent picture. So back to the store I go to get another replacement - Again.
For a phone that is rated highly and as a keen Apple product purchaser, I am a bit disappointed with the experience I have had with the iPhone 4. Let's hope they find a fix sometime soon because this is becoming a bit beyond a joke.....!! -
Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s con February 2013 in the Grand Central (NYC - USA) Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Or I need to find a way to take it to the US, where I bought it.
Thanks!!!You will need to return the phone to the US. iPhone warranty is only good in the country of purchase, with the exception of the EU.
-
is apple going to come out with a iso that lets ppl who have the iphone 3g to put up backgrounds its bs that i cant do it when ever i see something about the iphones even befor the 4g that all ways had backgrounds so what the **** is with that
iPhone 3G has received its last iOS update. If wallpapers behind the homescreen icons is such an important feature for you, you'll need a newer model iPhone.
-
Hello sir i have aproblem in my iphone i cant sigin in when i write my apple id
hello sir!
i have boght a new iphone 5s and i gaive my 4s to my brother. he make arestor to the 4s iphone but he faced aproblem that he cant sing in when he want to activat his phone. i used the sane apple ide to my new phone 5s and it works perfect, but when we used the same id in 4s phone its dosent work so can you help me please.
thankYou need to use the iCloud acct and pw that was initially set up on that phone when you updated to iOS 7.
-
I want to move my photos from my iphone 4s to my windows labtop? it shows a little iphone on the labtop screen when i plug it in but cant find my photos. when i plug my phone into my computer it doesnt show up under my computer? how do i fix this problem?
See this support document http://support.apple.com/kb/HT4083
-
My home button is stuck so it cant work and when i am in the safari or app stire i dont know how to go back does anybody know how to get it un stuck?
a temporary fix is to hold down the power button until you see a bar that says "slide to power off". slide the bar and wait about 2 minutes+then holding the power button when screen goes blank for around a minute? your device should now turn back on. you will be at the home menu.
now to know how to fix the problem instead of avoiding it i am not sure. hope this temporarily fixed your problem
is your device still in a 1 year warranty? -
Help me.. My iphone totally blank. But when somebody call its ringging but i can not answer the call. Its blank.
When i press all the button arround iphone, it on but directly go to camera. Then i press home button it can not functioning. It just capture the camera.. Please help me..Restart the phone. Hold the home button and the sleep/wake button together until the apple logo appears.
-
TS5196 others cant hear me when they call me or I call them unless i have speaker on
others cant hear me when they call me or I call them unless i have speaker on
Hello bhubbard5,
Thank you for the details of the issue you are experiencing with your iPhone 4s. The article below addresses the following symptoms:
Symptoms
Other people can't hear you, or have difficulty hearing you during a phone call or FaceTime call
Other people complain that you sound unclear during a phone call or FaceTime call
You hear no sound or the sound is unclear when playing back recorded audio
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thank you for using Apple Support Communities.
Best,
Sheila M. -
sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.
Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M. -
The method 'rollback' cant be called when a global transaction is active
I receive the following error stack while dequeuing a message (aq adapter outbound) and forward the message to a database (database adapter inbound) within Oracle ESB 10.1.3.4.
The database connection is dynamic using additional variables in the xlst transformation and putting the connection information (jndi name) in the xml doc:
<xsl:variable name="JDBC_RESOURCE"
select="/imp1:MixMatchMsg/imp1:Winkel/imp1:JNDI_NAME"/>
<xsl:variable name="SET_DATASOURCE"
select="ehdr:setOutboundHeader('/dhdr:OutboundDBHeaderType/dhdr:dataSourceName',$JDBC_RESOURCE,'dhdr=http://xmlns.oracle.com/pcbpel/adapter/db/;')"/>
An unhandled exception has been thrown in the ESB system.
The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException:
esb:///ESB_Projects/mixmatch_MixMatchESB/WriteWinkels.wsdl
[ WriteWinkels_ptt::merge(IntMixMatchCollection) ]
- WSIF JCA Execute of operation 'merge' failed due to: DBWriteInteractionSpec Execute Failed Exception.
merge failed.
Descriptor name: [WriteWinkels.IntMixMatch].
[Caused by: The method 'rollback' cant be called when a global transaction is active.]
; nested exception is:
ORABPEL-11616
DBWriteInteractionSpec Execute Failed Exception.
merge failed. Descriptor name: [WriteWinkels.IntMixMatch].
[Caused by: The method 'rollback' cant be called when a global transaction is active.]
Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602))
: oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException:
The method 'rollback' cant be called when a global transaction is active.Error Code: 0.
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:644)
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:739)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:927)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:842)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:865)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:231)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:138)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:411)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:169)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Bu
The payload looks as follows:
<top:IntMixMatchCollection xmlns:top="http://xmlns.oracle.com/pcbpel/adapter/db/top/WriteWinkels">
<top:IntMixMatch>
<top:nummer>1</top:nummer>
<top:omschrijving>C1000 Tandenborstels: 3 voor 2.56</top:omschrijving>
<top:kassabonOmschrijving1>Tandenborstelactie</top:kassabonOmschrijving1>
<top:kassabonOmschrijving2>3 voor 2</top:kassabonOmschrijving2>
<top:aantalPerKlant>2</top:aantalPerKlant>
<top:begindatum>2009-03-16</top:begindatum>
<top:einddatum>2009-03-21</top:einddatum>
<top:mixMatchGroepNummer>1</top:mixMatchGroepNummer>
<top:mixMatchGroepOmschrijving>WK 200912 Mix matchess</top:mixMatchGroepOmschrijving>
<top:intMixMatchDsCollection>
<top:IntMixMatchDs>
<top:volgnummer>1</top:volgnummer>
<top:aantalTeNemenArtikelen>3</top:aantalTeNemenArtikelen>
<top:omschrijving>C1000 Tandenborstels</top:omschrijving>
<top:kortingToerekenenJn>J</top:kortingToerekenenJn>
<top:bedragTeBesteden>1.23</top:bedragTeBesteden>
<top:kortingwaarde>2.56</top:kortingwaarde>
<top:mixMatchNummer>1</top:mixMatchNummer>
<top:intMixMatchHfdgrInDsCollection>
<top:IntMixMatchHfdgrInDs>
<top:hoofdgroepnummer>16</top:hoofdgroepnummer>
<top:mixMatchNummer>1</top:mixMatchNummer>
<top:mixMatchDoosVolgnummer>1</top:mixMatchDoosVolgnummer>
</top:IntMixMatchHfdgrInDs>
</top:intMixMatchHfdgrInDsCollection>
<top:intMixMatchArtikelInDsCollection>
<top:IntMixMatchArtikelInDs>
<top:artonnummer>10010205</top:artonnummer>
<top:actieInkoopprijsEncrypted>6C1407B28B5B7EDC</top:actieInkoopprijsEncrypted>
<top:uitsluitenJn>J</top:uitsluitenJn>
<top:mixMatchNummer>1</top:mixMatchNummer>
<top:mixMatchDoosVolgnummer>1</top:mixMatchDoosVolgnummer>
</top:IntMixMatchArtikelInDs>
</top:intMixMatchArtikelInDsCollection>
<top:intMixMatchHfdsubgrpInDsCollection>
<top:IntMixMatchHfdsubgrpInDs>
<top:hoofdsubgroepnummer>82</top:hoofdsubgroepnummer>
<top:mixMatchNummer>1</top:mixMatchNummer>
<top:mixMatchDoosVolgnummer>1</top:mixMatchDoosVolgnummer>
</top:IntMixMatchHfdsubgrpInDs>
</top:intMixMatchHfdsubgrpInDsCollection>
</top:IntMixMatchDs>
</top:intMixMatchDsCollection>
<top:intMixMatchTijdCollection>
<top:IntMixMatchTijd>
<top:dagnummer>1</top:dagnummer>
<top:begintijd>0001-01-0112.23.00</top:begintijd>
<top:eindtijd>0001-01-0114.45.00</top:eindtijd>
<top:mixMatchNummer>1</top:mixMatchNummer>
</top:IntMixMatchTijd>
</top:intMixMatchTijdCollection>
</top:IntMixMatch>
</top:IntMixMatchCollection>
Anybody any idea what could be wrong?
Any ideas for a workaround/solution?I encountered this error while trying ADF tutorial CH10 - Developing an Edit Page, after changing some data on the Edit page and click on Save, the error appears on top of the page. The roll back was called implicatly by ADF, per stack trace msg it seems to come from failing to commit and then failing to roll back. Not sure why this is happening, please advise.
WARNING: The method 'commit' cant be called when a global transaction is active. [TopLink Warning]: 2006.12.27 12:14:39.963--ClientSession(29795927)--Thread(Thread[HTTPThreadGroup-6,5,HTTPThreadGroup])--Local Exception Stack:
Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: The method 'commit' cant be called when a global transaction is active.Error Code: 0....
at QPPublicFacade_LocalProxy_4ogao92.mergeEntity(Unknown Source)<----------> WHAT may cause mergeEntity failed?? -
When talking to people they cant hear me when i am in speaker mode
when talking to people they cant hear me when i am in speaker mode. also when i take a video there is no sound. anybody know what the problem is?
Have a look here
TROUBLESHOOTING iPhone Hardware
http://support.apple.com/kb/TS2802
http://support.apple.com/kb/TS1630
If no joy... take it in to your local Apple Store and get it checked...
Be sure to make an appointment first.
Maybe you are looking for
-
Excise Details are not maintanied for Vendor 0000000957.
Hi, As per our regular process we are capturing inovie with J1IEX and doing GR in MB01 now i have captured invoice in J1IEX and while making GR with MIGO i am getting error Excise Details are not maintanied for Vendor 0000000957. , but when
-
Need to add custom button (xml) in VA05
I need to add a custom button (xml) to report output layout of VA05. Even the corrsponding functionality needs to be written for this button. Without changing the SAP standard code using Access keys, is there any other functionality in which we can a
-
I keep getting an error message after I burn a song to CD, telling me it failed when it, in fact worked. I have the latest iTunes software installed.
-
Bundling a vi for backwards compatibility
I am running 2 versions of Labview on different windows machines, 8.2.1 and 7.1. My problem is this: I am talking to a custom bit of hardware over USB, I only have code to do this in LV 8.2.1. I want to get the same functionality in 7.1. Is there any
-
please help i have two ipods but i can use any as i can download the newer version of Itunes as i have the older version of Bonjour on my laptop I just cannot remove this!!!!!!!!!!!!