HT1766 How do I connect iCloud to Windows 7

How do I connect my iClud to my Windows 7 PC?

Download and install the iCloud control panel for windows, then sign into your iCloud account and enable syncing.  This is described here: http://www.apple.com/icloud/setup/pc.html.

Similar Messages

  • How do you connect icloud to your hp?

    How do you connect icloud to your hp?

    To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows...
    From Here...
    http://www.apple.com/icloud/setup/pc.html

  • How can I connect to a windows server from a mac book pro

    How can I connect to a windows server from a mac book pre?

    I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
    I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
    Any help is greatly appeciated.

  • How do I install  icloud  in windows xp

    How do I install  icloud  in windows xp

    You can, but you have to hack the iCloud.msi file, & once you do that you will only have access to Bookmarks, & mail thru iCloud.

  • How do I connect to a Windows 7 File System from Mountain Lion

    I am wondering how to connect via Finder to Windows 7 hard drives.

    I have Mountain Lion and I have been able to connect to a Windows laptop on my home network.
    Go to 'Go' in Finder and select 'Connect to Server'. Put in the server address as smb://[ip address] / [server machine name]
    You will find the ip address by running 'ipconfig' in the CMD application on your Windows 7 machine. You will find the server name also in Windows under System in Control Panel. Good luck - it works but it is temperamental sometimes I have found and reboots on either machine often help !!!!

  • HT1766 how do i connect my iphone to itunes to remove passcode

    I forgot my passcode how do i connect my phone to itunes to restore the phone or remove the passcode

    Passionrasta wrote:
    I forgot my passcode .
    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • HT1766 how do i connect it to my computer

    How Do I connect My Ipod To Itunes After I Already Downloaded it?

    With the cable connection to USB is the easy way.
    Then click on iTunes.

  • How do I connect icloud to my 3g iphone?

    can you connect icloud to a 3g iphone?

    Fat finger the "5" there didn't I.
    Thanks for catching that.
    Allan

  • HT1766 How can I download Icloud on my Iphone4?

    How can I download icloud on my iphone4?

    That's because you don't have IOS 5.0 or higher to update over the air.
    do it the old fashion way and update thru itunes.

  • HT1766 how long should an icloud restore take to an iphone?

    How long should an icloud restore take to an iphone?

    Nobody here would know. Depends on how big the backup file is.

  • How do I install iCloud for Windows 7 using icloudsetup_exe Apple download that won't execute?

    When I download the iCloud for PC application, Apple provides a non-editable file name icloudsetup_exe instead of a normal windows executable name such as icloudsetup.exe, so after double clicking on the setup file, Windows then asks what application to open this file with, instead of executing the setup file.  Has anyone figured out how to make this work?

    Yeah, I use Windows on bootcamp for both my Imac and my Macbook Pro.
    In fact, seeing as my Mac partition on my external hard drive was successful i.e. I installed and can boot from them any time I like, couldn't I just use the external hard drive's partitions' bootcamp assistant and install/boot windows on there?

  • How do I connect to a Windows Workgroup and mount a shared volume?

    I have set up a network at home with my Mac G5 and my PC. I have a workgroup called "HOME". The PC can see my mac drive as a network place and I can access and browse it perfectly fine.
    However I have a drive on my PC which I have set up as a shared volume on the PC. I want to mount that shared volume on my Mac. When I set up the share on the PC, I am not prompted to enter a password, and the only password I am aware of is the one I use to log on.
    According to the instructions I am supposed to enter the IP address and a "sharename", but I have no idea what the sharename is. If I enter the share name of the volume I want to mount, I get a dialog box which requires a password. It sees the "HOME" workgroup and that is already filled out in the Workgroup window.
    It has entered my Mac administrator account name in the Name box. I don't know if this is what name it needs, but what ever combination of names and passwords I use, including my PC logon name and password, I always get the error message "cannot connect because the name or password is not correct".
    I have tried using different formats for the smb://Servername/sharename address, but everything I have tried gives the same result.
    I have seen many other postings on this subject, all with similar problems, but so far I've yet to see an answer. A disscussion from 2004 said this was a known issue, but surely there must have been a fix by now?
    I have read many of the mac documents on this subject but none specifically tells you what the sharename is and how you set a password for it.
    Thanks in advance
    David

    OK - I have answered my own question, so if anyone else has this problem, you may like to know!
    I needed to know what sharename to use to log on. On the Windows PC I was under the imprression that the windows log on was my user name. But if you right click on the My Computer and go to manage, you will see Local Users and Groups. Under Users, you will see all the user accounts on the PC. Even though I only ever set up one and it was called "David" that doesn't actually count as the user name.
    If you look at the headings at the top, you will see that whatever account you think you are in, the chances are it actually has the name "User". It is what ever is in the Name column that the Mac needs, not what is in the Full Name column which is what you log on as. You can't change this, but when you connect to server, you can enter the SMB script smb://USER@(name of PC or IP address)/share name.
    If you wish to mount a volume rather than a shared folder, simply type in the windows drive letter followed by the "$" - ie D$. The password is your log on password on the PC. Otherwise you can set up a folder share on the PC in the usual way, and give it a name. This will be the share name you enter in your smb script.
    NONE of this is very clear in any of the Mac Networking Help guides that I have trawled through, so if they were to add it, you might help some more people...
    Thanks,
    David
    G5   Mac OS X (10.4.6)  

  • How do I connect iCloud mail to outlook 2007

    I have followed the directions on the website for setting up outlook 2007 to retrieve and send mail through my iCloud account.  I continually receive an error message that outlook cannot connect to the imap server.  How do I fix this?

    I have the same problem.  I have also tried various variations listed on other websites (e.g. using "p01-imap.mail.me.com" or "p02-...." instead of "imap.mail.me.com" as the incoming mail server).  None of the variations works either.  I always get the error messages:
    "Log onto incoming mail server (IMAP):  Your server unexpectedly terminated the connection...."
    and
    "Send test email message:  None of the authentication methods supported by this client are supported by your server."

  • How do I install iCloud on Windows Vista?

    I think the current iCloud can only be installed to Windows 7 or 8, so where can I get the earlier version from?

    Hi Nikpfost,
    Essentially a Intel Mac can run Boot Camp.
    This runs you through several steps including Installing Boot Camp.
    Burning a CD or Mac drivers for Windows (IS/Was XP based)
    And then installing a Service Pack 2 edition of XP and Then Installing the Mac drivers (drivers for the Mac hardware such as Trackpad, iSight etc.)
    This forum will have more on the Vista side
    http://discussions.apple.com/forum.jspa?forumID=1165
    Another option is Paraelles.
    This would still need you to do the Boot Camp and CD Burning bit to get the Drivers for the hardware.
    11:07 PM Sunday; June 3, 2007

  • Don't know how to set up iCloud for Windows 7.

    I am running Windows 7, and i looked in the Network & Internet section of the Control Panel for iCloud, but iCloud is not there. What do I do?

    Did you download it?  If so, just run the exe file and after installation it should go directly to the configuration / setup

Maybe you are looking for