HT1766 I am trying to restore my ipad its saying its disable and i need to connect ti itunes
I have been locked out of my Ipad (disabled) can someone helpme unlock it
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
Similar Messages
-
My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?
Then try DFU mode and then restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My ipad says its disabled and need to connect to itunes but is says to enter password which I don't have because of my kids. How can I reset the i[pad
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it
-
ipad no longer functions
states it is 'disabled' and to connect to itunes
computer wont recognize ipad when connected
thoughts??iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My ipad says ipad is disable and it needs to connect to iTune?
I have this Ipad taht my cousin gave me to fix, when i turned it on is say ipad is disable and on the bottum says connect to iTune. How do I reset it with out logging in.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost
Message was edited by: Diavonex -
What does it mean when my ipad says it is disabled and I need to connect to itunes
Okay, so, I just got an ipad yesterday and when I got to work today it said " ipad is disabled, please connect to itunes", but it will not allow me to connect because I have a password. Anyone have a solution?
If it is disabled it must be restored.
Read:
http://support.apple.com/kb/HT1212
and
http://support.apple.com/kb/ht1808
This is not normal for a new iPad. -
Help, please
You have to restore the device with iTunes on your computer. There is no other way around this now. This will explain to you how to restore.
http://support.apple.com/kb/ht1414
Pay attention to the last part of the article about using recovery mode. You may need it. -
my ipad 2 suddenly shut off and asked me to connect to itunes it asks me to restore but it wont work need help pls
The iPad is telling you it has entered the recovery mode - you need to follow the instructions in http://support.apple.com/kb/HT1212 for connecting to a computer running iTunes by way of the recovery mode.
-
I have download and update iPod touch (4th generation) running firmware version 4.2.1 to iOS 5 or later through iTunes 11.1.5.5 so i have tried to restore iPod twice but still showing only USB cable to be connect to iTunes. Nothing is happening. so please tell me how to resolve it.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...
Also see your other post > After updating iOS iPod is showing only iTunes log with USB Cable.. -
It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
My ipad is disabled and i have to connect to itunes what do i do
my ipad is disabled and i have to connect to itunes what do i do
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
my kids entered the passcode several times wrong and now it is disabled and written on it"connect to itunes" , when i did connect it to itunes it said "can not connect to ipad because it is locked with a passcode" what can i do pls?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it.
If you do it via a different computer that it's not normally synced to then (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
I have the Iphone 3gs and it said update required and i needed to connect to itunes so i did al that and now everytime i go to restore everything it just says error and then i have to do it again?whats wrong with it?
Are you getting an error message number with your error message? If so, what number are you getting?
-
In case this doesn't show up....I am trying to restore my ipad due to the fact my girls forgot passcode....when I hook up to PC and try to incorporate itunes, it will not come up maybe because I have no itunes on my ipad...can anyone give me any suggestions, as of now I have disabled the ipad trying for a passcode...
You do have iTunes on the iPad. You need to have iTunes on the PC because you need to restore it now.
You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
Try this ..... You will have to use recovery mode
http://support.apple.com/kb/ht4097 -
HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer
How do i restore an ipod that has been disabled and has never been conected to itunes
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Where is the Summary button in iTunes?
I want to select what I want to upload to my iphone 5. I have the most recent version of ITunes. Can't find anything in it. Don't see the beauty of the "upgrade." For today, I would like to know where the "Summary button" is so I can tell iTunes what
-
Itunes in Asian language - not English
I upgraded to itunes8 and now there is no words, just boxes (except itune words such as podcast etc) and if I go into the help section, it is all in an Asian language. I have uninstalled, reinstalled old and new versions and seem to come up with the
-
Upgrade to SUNWCuser to SUNWCXall in Solaris 10
Hi, Can I upgrade from SUNWCuser to SUNWCXall in Solaris 10. Appreciate if I get some quick reply from anyone as all the appication, db are installed and at last I noticed that the Solaris Cluster is SUNWCuser but the requirement is SUNWCXall. Apprec
-
Nasty Burning and Disc Recognition Error(s)
Hi there, I've recently been having two problems with my drive (HL-DT-ST DVDRW GWA4080M model) regarding DVD-R burning. I work with Toast Titanium 7. I also recently tried a new brand of DVD called Dataware (I switched from Ridata, with which I had n
-
I have an old charging cube that I purchased with my iPod Photo several years ago. It has various adapter plugs to use in other countries some of which have 220 volts. In the USA we use 110 volts. Can I use the old cube with the proper plug to char