HT1766 I have multiple issues, backup password, Gmail Error Msg, and ID problems.
I want to back up to my computer, but can not remember my username. I thought it would be the same as my Apple password but it isn't. Is there anyway to recover it. I actually just want to turn it off.
Also, does anyone know why my husband's phone defaults to my Apple ID everytime he wants to download something? I look at the user ID in the Store and it has his user ID, but to sign it, it shows mine and wants my password?
Also, I get an error message if I try and use the mail app for GMail. And sometimes purchase I make end up on husbands phone.
P.S. I have Iphone 4S and my husband has Iphone 4. I hope that can help someone, so I can fix some of these issues.
I know these are a lot of issues, but if any one can help even a little with one or some of these problems, I will be so grateful and a load off my mind.
Thank you in advance.
on your husband iphone - go to setting - app store - apple id - log out and log in with his id.
If your using a app for Gmail, I suggest contacting the app developer or see if they have a support forum.
Similar Messages
-
I was trying to update my ipod to iOs 5 but I have forgotten the backup password
I was trying to update my ipod to iOs 5 but I have forgotten the backup password help please?
You need to restore your iPod to factory defaults/new iPod. That is the only choise.
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946 -
I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphoneThis sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.
-
Hi, I hope I can find a bright young person here. I have forgotten my backup password and i'm almost all the way through upgrading to ios5 and icloud. ive had three guesses.. scared to have four. Can anyone tellme what to do? i think it is too far in to press cancel!
No one can help you with that. You will have to remember it or you won't be able to activate the device, sorry.
https://www.apple.com/support/icloud/account/ -
Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?
anthonycancel wrote:
I want the folders I already backed up to come together into one folder when that year is over. Is there a way to manually do that or automatic through TM?
I'm quite sure there is no "automatic" way to do this. I've never heard of anyone trying it either. I suppose if you wanted try it, you could simply create a new folder in the same partition TM is on, label it for that year, then gather all the days for that year and drag/drop them into the folder. I suspect (but do not know) you'd be risking the continuity of your backups, meaning TM would simply start over again, meaning that next back up would start a new series of backups, with the first one roughly equalling the entire capacity of your internal HD, instead of adding only the new data to the previous backup. Once again, I would recommend against it, unless you're fine with TM starting a new series of backups if it doesn't work out the way you want it to. Hope you'll post back with results so we can learn from it. -
When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???
You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)
-
If I have multiple browser windows open (not tabs, windows) and I close 1 of them, why do ALL browser windows close?
How are you closing the window?
Are you using the File menu or the close X on the title bar?
Use Alt + F to open the File menu with the Close Tab entry visible (doesn't work with the mouse). -
Firefox constantly kicks us off of our verizon email unexpectantly and inconsistently. We have downloaded latest version of Firefox, 3.6, and the problem is still there
== URL of affected sites ==
http://us.mg201.mail.yahoo.com/dc/launch?.partner=vz-acs&.gx=0&.rand=8n9ng1ok4dl52Please update to the latest Firefox version by going to www.getfirefox.com as you are using Firefox 3.0.19 as you can see in your useragent key: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.19) Gecko/2010031422 Firefox/'''3.0.19'''
-
I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.
Artist: Imagine Dragons
Album: Night VisionReport it here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
HT1766 I have forgotten my restore password,can I recover it?
I recently updated my iPhone to ios7, however it seems frommy last backup over a year ago I gave it a password.I have tried loads of different things but I cant remember what it is :-(
Is there a way to recover your backup password?
Thanks
Crakey78As stated in the support article, you can do this from any computer.
Use Find My iPhone
If you enabled Find My iPhone, you can use it to erase your device.
Go to icloud.com/#find to see if you enabled Find My iPhone.
Click All Devices at the top of your browser window.
Select your device and click "Erase [device]" to erase your device and its passcode.
Use the Setup Assistant on your device to restore the most recent backup of your device.
Use recovery mode
Follow these steps if you never synced your device with iTunes, if you don't have Find My iPhone set up, or if you can't get to your own computer. You'll need to put your device in recovery mode, which will erase the device and its passcode. Then you'llrestore your device as new or from a backup.
Disconnect all cables from your device.
Turn off your device.
Press and hold the Home button. While holding the Home button, connect your device to iTunes. If your device doesn't turn on automatically, turn it on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode.
Click OK, then restore the device. -
Well the thing is that when I open any site that requires passwords everyone can see what I´m typing instead of appearing dots like in old version for example:
username: littlegirl
password: hjy --> this is what i dont want isntead of appearing words i want dots
just after typing and entering dots appears where can i switch this?Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u '''Use hardware acceleration when available''']. All these settings/options/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme, option or hardware acceleration is causing issues. Disabling/enabling hardware acceleration, and some types of add-ons in normal mode may require a Firefox restart.
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.org/en-US/kb/Options%20window Options]
An easier method would be to consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''.
(To revert to the previous profile, close the new profile, start Firefox and choose the '''*.default''' profile. While the [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager] is open, you can also delete the newly reset profile (the one containing random numbers)).
[https://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles]
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto] -
I have an old backup with a list of contacts on Outlook, however want to update it with my latest list. If I select contacts on sync will it overwrite the list on my phone with the old list from my pc?
you dont. its all or nothing
-
Multiple issues with PCI-5640R FPGA: DAC and Strange Execution at Host
We are working on a communications systems project using the PCI-5640R
IF-RIO transceiver and the FPGA module. At the FPGA, a sequence of bits are
being modulated through multiplication with the sine wave generator. The
next step is to take the modulated sinusoidal signal and send it through the
DAC. Throughout this project, we have been using the Analog Input and Output
example project from Getting Started with the 5640-R IF... as a template
to build this project. There are, however, several issues/questions we
have. Attached are the HOST and FPGA vis that we are working with.
1. The host only runs every other time. At the host (BPSK_TX(HOST).VI, the execution gets
halted for an infinite period of time at one of the FIFOs until 'stop' is
hit. But then at the subsequent execution, the host completes execution
of the program. In other words, the host is only receiving data from the
FPGA every second time it is run. Why is this happening? Are we missing
something at the host or FPGA VI?
2. How exactly do we send our own digitized signal through
the DAC? As seen in one of the FPGA VIs, we have tried modfiying the
output section of the FPGA VI in the Analog Input and Output project in which
the FPGA reads from the FIFO. In our case, we are modulating the signal
in a separate section, writing it to a target-scoped FIFO and then reading from
that FIFO and processing the data as in the example. This modified FPGA
vi is "BPSK_TX(FPGA).VI)
Unfotunately, we are not observing anything at an oscilloscope
connected to the transceiver. Even when we try to pass in a
"custom" signal at the HOST we have no luck observing anything
coherent. As seen in the bare_sine_wave_test (FPGA).vi, we have
attempted a relatively simple way of sending a signal through the DAC, yet
still no luck. I am guessing that this is related to issue #1.
On a related note, when
receiving the signal and running it through the ADC, what steps are
necessary? Can one assume that it is
similar to the FPGA.VI in the analog input and output example?
3. How do for loops and while loops synchronize with timed loops
and frames in the FPGA? In the FPGA we are using a for loop to
modulate the signal because the sine wave generator cannot be contained within
a timed loop on the FPGA. This will be important to us because at the
receiver we will need to know the symbol rate in order to recover the signal.
I would sincerely appreciate any feedback or help that can be provided
on this,
Attachments:
BPSK_TX(FPGA).vi 152 KB
BPSK_TX(HOST).vi 257 KB
bare_sine_wave_test (HOST).vi 135 KBIt may be that the FPGA Refernce has not been binded. The issue was that the VIs need to be bound to the ni5640R FPGA VI Reference.ctl control. This is an option on the popup menu when clicking on the Open FPGA VI Reference VI. In some cases, it may already be selected in the popup menu. In this case, unselect the Bind to Typedef option. For good measure, I usually selected the FPGA VI to use with the host VI, and then I reset the Bind to Typedef option. In most cases this should fix the ni5640R FPGA VI Reference.ctl control mismatches throughout the VI. In some cases, I have to Save All, close the host VI and all subVIs. Then reopen the host VI. This has always working in all cases for me.
Jerry -
I have multiple Apple IDs, can I delete one and/or merge my accounts?
I unintentionally have multiple Apple IDs. I just switched to an iPhone and the store employee created what is now my 3rd apple Id. Is there a way I can I delete the extra accounts so that I can have my email addresses all in one place? Or is there a way to merge my accounts?
1. No. Only Apple itself can delete Apple IDs; if desired, click here and contact them.
2. No.
(124025) -
Hi all,
Here is my question: I have MBP early 2011 and was trying to install Windows 8 using Bootcamp but the option to install Windows is grayed out so I can’t click the box next to “Install or Remove Windows 7.” Is this because I have multiple partition on my hard disk drive? Is there anyway I can install Windows 8 using Bootcamp without deleting my partitions on my hard disk?
Few more details:
Mountain Lion 10.8.2
Bootcamp 5.0.0
Thanks for your responseYou can't create a Boot Camp partition on a drive you've already partitioned, and you can't install Windows 8 through Boot Camp at this time.
(71680)
Maybe you are looking for
-
Just updated and the menu has been changed without asking me. How to change the color?
The new white font on pale green background is awful and difficult to read. Where can I customize these?
-
Hi I wonder if someone could help me please. Im trying to deploy an EJB CMP Relationship example. In fact the one from Enterprise JavaBeans by R. Monson-Haefel Example 6.3. Now I realise there was some code missing to do with throwing Exceptions, whi
-
Exporting files from Photoshop Elements 12
I'm trying to export files from Elements 12 but the export option is greyed out. Why?
-
Experts, If a Cost Center allocation is done, would it also affect the Profit Center's associated with it also ? All answers would be duly appreciated and rewarded with points. Thanks, Nandita
-
Is it possible to make nest fold in I cloud?
i m trying to work on net but i m unable to creat NEST FOLDER in icloud. iwork / numbers / pdf cannot put in one icloud folder , pls help me if somebody have a way.....