HT1766 I purchased two apps for my iPhone and every time I try to install them on my phone I keep getting a message saying that the file is over 50MB and I need to connect to wi-fi or use iTunes on my computer to download. How do I do that?
I just got an iPhone 4 and have been downloading apps from the iTunes store when I encountered difficulty with two specific apps. Each time I try to download dictionary and star walk I get a message saying they are over 50MB and I need to be connected to iTunes to download, which I've tried to no avail. I also thought that when I sign into iTunes on my PC that it would automatically show that my iPhone device is connected (just like it does with my iPod) but it doesn't show the phone icon. I am not sure iTunes is recognizing my phone. Any help you can offer is greatly appreciated.
Can you connect to a wifi source on the device? Enable wifi in settings on the device itself. If you don't have wifi at home, there may be a local hotspot you can use for this.
The reason this happens is carriers don't want people downloading huge files that would slow their network as well as eat up your data plan.
Similar Messages
-
Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W -
I purchased Itunes Match and every time i try to run it, it doesnt even finish step 1, it just says "We could not complete your itunes store request, an unknown error occured (4007" what do i do because i need itunes match to work!
- Try manually placing the iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I've tried to intall ios 7 but on the activation part on the phone i keep getting a message saying 'your iphone could not be activated becayse rge activation server cannot be researched. Try connecting your iphone to itunes to activate, or try again in a few minutes'. However when i plug my phone into the computer itunes has an error message saying 'We could not complete your itunes store request. The network connection was rese. Make sure your network connection is active and try again'. How do I do this? Thanks.
unfortunately no, a million people are attempting to update their phones right now, and thus activate them. Patience will have to suffice.
For the future, I would recommend not updating essential work devices on the launch day -
I can't retrieve my email because every time I do a message pops ups that saying that it cannot connect to the server. This iPad is for home use only.
Hello Armandingo,
I'd suggest taking a look through the following article, as it provides information and troubleshooting steps that can help get Mail moving on your iPad.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Allen -
iPhone update to 4.3.3 failed and gave me the error message, " update failed due to network connections timing out". I am using a cable modem with ethernet. iPhone is a 4G currently running 4.3.1. What is the solution?
i believe it is a result of a weak connection. maybe try it at someone else's place?
-
Trying to gt my computer to move faster i deleted microsoft internet explorer an in order to get my computer to let me on the internet i had to download firefox when i did this i started receiving a message that said Extentsion helper has encountered a problem and needs to close not knowing this came from firefox i tried to delete firefox but kept receiving the messag i have since re-downloaded firefox but can't find extension helper to deactivate it my computer will not let me do anything i need help resolving this please
Stacey FeatherstoneCan you run Firefox long enough to display the Add-ons page? Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable. (Remove also is available for some extensions, but not the ones that Firefox found in a registry scan or shared folder elsewhere on your system.)
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
If you cannot access the Add-ons page, try starting Firefox in Safe Mode, since that deactivates extensions and hopefully will stop that message from coming up long enough to get to the Add-ons page.
''If Firefox is not running:'' Hold down the Shift key when starting Firefox.
''If Firefox is running:'' You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
A small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Success? -
The "reload" problem happens when I first load Firefox with "MY YAHOO" as home page.
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another. Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please
I cannot for the life of me figure this out.What you need to do is connect your phone to iTunes but do not click sync. Go to File at the top and click transfer purchases from phone, that'll put all your apps into iTunes. When it's done transferring, locate your phone on the sidebar and click it. Then find the apps option above the picture of your iphone, you can select which apps you want or don't want on your phone. After selecting your apps then you can sync. Once you do this you should never have your problem anymore.
-
I recently purchased a movie (Prometheus) on my computer through iTunes and every time I try to put it on my iPhone, it fails. How can I successfully sync this video? Mind you, every other file syncs flawlessly.
Can you connect to a wifi source on the device? Enable wifi in settings on the device itself. If you don't have wifi at home, there may be a local hotspot you can use for this.
The reason this happens is carriers don't want people downloading huge files that would slow their network as well as eat up your data plan. -
I have os 10.5.8 software on my mac and I need to update the software on my mac so I can update my iphone 4s, every time I try to update my mac with the 6.0 it says it doesn't need any updates, but my mac still has 10.5.8.... any help?? Please...
You must first buy Snow Leopard from Apple: 800-MY-APPLE (in the US)
Make sure your system meets Snow Leopard's requirements:
Mac OS X 10.6 "Snow Leopard" System Requirements
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools -
I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...
JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.
-
Im tryinging to sync my new iphone 4 and I keep getting error message saying can't connect to store -9808
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release
-
I keep getting a message saying this accessory is not optimised for this iPhone, what does this mean? I haven't downloaded anything
If you are getting it when your iPhone is not connected to anything it probably means there is line/debris that is causing a short between the pins on your dock connector. Get a soft brush and clean it.
-
Help me please?
I am trying to get my iPhone 4 to update to version 5 but each time I connect it to my PC and update, or even restore I keep getting a message saying "cannot connect to update server"
Any suggestions??Hope you already found a solution, if not try this:
https://discussions.apple.com/thread/3928478
Maybe you are looking for
-
Monitor goes dark on 2008 Mac Pro Tower with ATI Radeon 5870 Card
I have a 2008 Quad Core Intel Mac Pro Tower running 10.6.8. The original graphics card had trouble with HD movies of any kind and eventually my screen would sometimes not turn on (stayed black) when the computer was turned on. So I replaced the graph
-
Recording live audio from a Bus
Hey, So what I'd like to do is record audio from a bus directly into an audio channel I have a test oscillator in the input slot of an instrument channel As you can see, the output is routed into bus 1 In order to process any audio that I have coming
-
READ_REPORT_LINE_TOO_LONG
Hi I am getting a dump 'READ_REPORT_LINE_TOO_LONG'. the program is Z, but the dump is coming in some standard table. the thing is that I am getting this dump in quality but not in dev. please help Regards Manu
-
How ACE classifies the traffic and send it to appropriate Context
Hi , Could some one please explain packet clasification in ACE modulue ,example : let us assume thee are three contexts ( context1 , context 2, context3) in ACE module , how the ACE classifies the traffic and send to appropriate CONTEXT if any cus
-
I was talking to my friends on skype when suddenly went offline. I tried to log back in but it said the password is wrong. So I went to email and recovered the password. I log in this morning and I see my money is gone and some made calls to Russia.