HT1766 i try to restore and it says the backup failed - am I out of luck?

I try to restore on my ihone 4 running the latest os and ist says the backup failed - am I out  of luck?

What is the exact wording of the error message?  Usually an error number is also specified.

Similar Messages

  • HT1766 I want to restore my iPhone to the backup I did just before upgrading to iOS6. Today's sync/backup erased most of my contacts and almost all of my phone numbers within the remaining contacts.  No iCloud backup because of other issues still to resol

    I want to restore my iPhone to the backup that I did just before upgrading to iOS6.  When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS.  I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL.  visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet.  Thus, I am backing up to iTunes.
    This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone.  I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
    Since I had a backup just last week, I'd like to just go back to it.  But how?  Or, is there another way to get my contacts restored?  And why did they disappear?  And what else may be gone that I just don't know about yet?

    I want to restore my iPhone to the backup that I did just before upgrading to iOS6.  When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS.  I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL.  visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet.  Thus, I am backing up to iTunes.
    This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone.  I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
    Since I had a backup just last week, I'd like to just go back to it.  But how?  Or, is there another way to get my contacts restored?  And why did they disappear?  And what else may be gone that I just don't know about yet?

  • HT4061 I just updated my phone not via my computer and it will not turn on and it says to plug into Itunes.. when i try to do that, it says to restore.. i try to restore and it says it cannot

    I need this phone working tonight as i just started a new job and ABSOLUTELY need it for business purposes!!

    I have also reinstalled itunes and there is the same response when i try to restore my phone

  • HT201210 my iphone 3gs is on recovery mode but when i try to restore it, it says the server cannot be reached or temporary unavailable.please i need help.

    can you help me my phone doesnt want to restore from recovery. it keep on saying the server is unavailale

    Usually a sign of a jailbroken iPhone & since Apple does not support jailbreaking, that's what happens. If that's the case with you, we can't help you here...the terms of use prohibit such. Sorry, but you'll have to go elsewhere.

  • HT1414 my iphone 3gs is on recovery mode but when i try to restore it, it says the server cannot be reached or temporary unavailable.please i need help.

    can you help me my phone doesnt want to restore from recovery. it keep on saying the server is unavailale

    Usually a sign of a jailbroken iPhone & since Apple does not support jailbreaking, that's what happens. If that's the case with you, we can't help you here...the terms of use prohibit such. Sorry, but you'll have to go elsewhere.

  • My time machine wont back up and keeps saying The backup disk image "/Volumes/Data/karen's iMac.sparsebundle" is already in use.

    My Apple Time Capsule stopped backing up a few weeks ago and after upgrading to Mavericks on my IMac I keep getting the message:
    The backup disk image “/Volumes/Data/karen’s iMac.sparsebundle” is already in use.
    I have no idea what to do and am new to having a Mac -
    Also a friend had orginally set my wifi up to be called "Karen's wifi" and it has also stopped connecting to the wi fi also so am using ethernet connect.
    Can someone please give me an idiot's step by step guide please so my back will work again?
    Thank you

    Locate the Time Capsule
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes, then try another backup
    If you are having WiFi connection problems, you should start another separate post for that issue.

  • Every time I try and burn a music CD from the songs in my library I get an error message (-3) and it says the disc failed to burn.  Why?

    I am trying to burn a CD from some of the tunes in my library.  I successfully burned 3 CDs from my playlist.  However, I am trying to finish up and burn the rest of my playlist, but when I insert a blank CD it says it's canceling the burn and says it failed, error message (-3).  Can anyone help?  I have already tried to restart my computer but to no avail.

    Hello Netsclark
    Check out the first article below for some general troubleshooting options for issues with burn a disk in iTunes. Also check the settings and try a slower burn speed, as that can be helpful.
    iTunes 11 for Mac: If you have trouble burning a disc
    http://support.apple.com/kb/PH12149
    iTunes 11 for Mac: Burn Settings
    http://support.apple.com/kb/PH12271
    Regards,
    -Norm G.

  • I am trying to download from iTunes and when I clicked on the Sync button, it indicates that it is waiting to start and then says the sync failed.  what is the problem

    Trying to download from iTunes and when I clicked on the Sync button, it indicates that it is waiting to sync.  Then it comes back saying sync failed.  What is the problem ?

    Few questions..
    are you using windows or mac?
    what version of itunes are you using?
    have you EVER been able to successfully sync with itunes?
    what iOS version are you running on your phone?
    This is a great article for syncing with itunes. Good Luck
    http://support.apple.com/kb/HT1386?viewlocale=en_US

  • HT201210 Iphone 4 problem....downloaded ios7 and its froze on "pic of connection with arrow up then i tunes, then i tunes icon"  i go to restore and it says "device not found" although it is connected...

    iphone 4 - yesterday it popped up to update to IOS7.... now it is froze on the screen as a picture (one end of connection with arrow up to itunes written out to itunes icon"..... ive tried restoring and it says   "the iphone "iphone" could not be restored. Device not found"....  although i do have it connected to my puter and have itunes activated.
    i wished some one have warned me about this mess...
    Judy

    iOS: Unable to update or restore

  • HT201210 my iphone says it needs to be restored but when i try to restore it it says it cant be restored and theres an unkown error

    My iphone says it needs to be restored but when i try to restor it it says it cant be restored and it has an unknown error

    Hi folks, just yesterday i can restore my iphone 4 that have a problem when i restore from itunes, when i do the restore from itnes, always showed me the following error:
    01:41:37.0017] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
    [01:41:37.0017]    Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
    [01:41:37.0017]       Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
    [01:41:37.0017]          Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
    [01:41:37.0017]             Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
    [01:41:37.0017]                Depth:5 Error:Exception at :0:
    [01:41:37.0017]           - kBBUReturnTimedOut(8)/16: Pinging timed out
    what I did was this: just when I will finish the process, when the status bar is at the end in the firmware, only put the sim card and go back to take out, I do this like 4 or 5 times and the process restoration ends so well. This method I tried it 2 times and 2 times worked. I spent like 10 hours trying to restore iphone without results, until I started watching the logs and the key is when you are upgrading the firmware sends a command to answer yes. And I hope this helps.
    This is the line of the log that appears and when the restoration is correct:
    amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: YES
    Regards.

  • TS3694 Ipad won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a

    Ipad 4 won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a day. I read the restore notes on apple, but this seems to be a little more unique than the standard recovery issues. Any ideas as to why I seem to keep stalling during the restore process?

    Couple of things I can think of before going to the Apple store.
    First, if you can, power off the iPad. Then connect it to the charger that came with the iPad and plug that into a known good wall outlet. Leave it there at least an hour then try to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    Also, you mentioned you have the latest iTunes. But it would be good to check the actual version. If the iPad is running iOS 7 you need iTunes 11.1 or later.

  • TS2529 I had backed-up my iPhone and when I try to restore it it says that the back-up is corrupt or the iPhone is not compatible. I had a bunch of pictures that I need from that restore. Is there any way to get them back? I did the back-up to my Macbook

    I had backed-up my iPhone and when I try to restore it it says that the back-up is corrupt or the iPhone is not compatible. I had a bunch of pictures that I need from that restore. Is there any way to get them back? I did the back-up to my Macbook

    If the backup is corrupt, there is nothing that can be done.
    For what reason did you choose to not copy the pictures off the device to a computer prior to attemping an update or whatever caused the need to restore?  iPhones are not intended as sole storage of any media.

  • After I tried to update my ipod to iOS 5, my ipod screen turned to the screen of the cherger cord pointing to the iTunes symbol. when I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes  and i did download t

    After I tried to update my iPod 4 to iOS 5, my screen turned to the USB cord pointing to the iTunes symbol. When I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes and I did download the latest version of iTunes (11.1.1). I tried to restore it again and the same error occured. I dont understand half of the instructions for the resolution of the 3014 error code so I did the instructions that I understood and nothing has changed. Please tell me how I can fix it.

    Just what do you not understand?
    Did you try:
    Try to restore from another known-good computer and network.
    Error 3014
    This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    Resolve specific iTunes update and restore errors - Support - Apple
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

  • The soft (4.3) in my i4 is messed up, badly how i reinstall  ... i try to restore and says .. restore and update. download finishes 666.6 and after that it gives me an error

    the soft(4.3) in my i4 is messed up, badly. how i reinstall  ... i try to restore and says .. restore and update. download finishes 666.6 and after that it gives me an error

    I'm assuming error 3259. Temporarily disable ALL of your antispyware/antivirus software, open your firewall and try again.

Maybe you are looking for

  • Error in posting to a ledger using sapfgubt

    Hi experts, May I ask your help regarding the dump error I get when posting to a ledger using the sap standard program sapfgubt. Below is my code. loop at itab. move correspoding fields of itab to sidata. perform e10_ext_table(sapfgubt) using ' ' ' '

  • WebDynpro CO not found when chosing in GP Design Time

    Hi, we want to integrate a WebDynpro Java in GP. Therefore we chose a Action and add a CO. When chosing like add WebDynpro Component (GP Interface) we are not able to pick our deployed WebDynpro Component! What might be the failure?! br

  • Delaying

    Hey, I will try to explain my problem as best as I can without it being too complicated... here goes. Me and a friend have created a new flash website. Now, on the top navigational bar... if you press on one of the buttons to go to a differen't "page

  • Creating a Payment plan in background

    Hi , Can anyone please suggest any method to create payment plan ( EK92) in background . Thanks, Priyanka A

  • Work Flow Process in a Support Project

    Hi Gurus,              Could you mail the work flow Process of Solving a Ticket.ie Introducing a New configuration and its Authorizations? Regards, Sarosh