HT1766 im trying to backup, but when i hit file menu and select devices it wont allow me to select

im trying to backup my iphone date so i can transfer to another one, but when i hit file menu in i tumes and select devices it wont allow me to press anything

If you click the iPhone button in the sidebar or in the top right corner, you should should see the Back Up section where you can click Back Up Now.
Or you can right-click the iPhone button and click Back Up

Similar Messages

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

While updating Apple TV now unit is locked up. Tried resetting with remote no help. Connected to iTunes Apple TV comes up to reset but when you hit reset fails and said it can't find any apple tv

While updating Apple TV now unit is locked up. Tried resetting with remote no help. Connected to iTunes Apple TV comes up to reset but when you hit reset fails and said it can't find any apple tv

Dear Brian:
Create a Play List in iTunes.
Control-Click and open "Export" in the highlighted Playlist in iTunes.
With "Export" opened:
1. Click on "Format" and choose "M3U";
2. In "Save As" name your "WhatEverNamePlaylist.m3u"; and
3. In "Where" tell the program where to send your "WhatEverNamePlaylist.m3u".
You are done creating the Playlist.m3u in iTunes.
Open "Subsonic Web Page".
Left hand column open "Import playlist".
In "Import playlist" click "Choose File" and open the "WhatEverNamePlaylist.m3u"; you created in iTunes.
The "WhatEverNamePlaylist.m3u" should now occupy the space between "Choose File" and "OK".
Click "OK".
The file should now be in the "Playlist" on the left.

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes.

I cannot search a specific word or information on the webpage when using Firefox browser on Mac OS X 10.6.8. When I go to File menue and select "Find" or "Find again", there is no response. What is going on and how can I fix it? Thanks. Sonia

I am using the latest Firefox version.

Does the Find bar show when you select Find (Cmd + F)?
You can try:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

I tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

Hi
The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
(Or just set the fader manually in MS)
CCT

TS2756 I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do no

I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do now?

iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
Use Bluetooth to tether your iPhone, iPod touch, or iPad
http://www.macworld.com/article/1159258/bluetooth_tethering.html
How to Connect an iPad to an iPhone Via Bluetooth Tethering
http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
 Cheers, Tom

Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server. Help!

Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server. Help!

Place the iPOo in recovery mode for the passcode issue. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Also see:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

I deleted firefox because of malware; I want to reload it, windows or explorer blocks it before begins; I tried the forum, but when I click on a link I get spammed: I am using Trend Micro Titatanium, but it doesn't seem to be working, can you help me?

I deleted firefox because of malware;I want to reload it but windows or explorer blocks it. I tried the forum but when I click on a link I get spammed. Can you help?

You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

IPad1 can not install software 4.3.2 update -message due to corrupt backup - but when I go to delete backup there is no backup in device section of itunes - in preferences

iPad1 can not install software 4.3.2 update - message - due to corrupt backup - but when I go to delete backup there is no backup in the device section of itunes under preferences

The problem was cured by going to <user>/Library/Application Support/MobileSync/Backup and moving the files from that folder to desktop and the ipad backed up and the software installed

HT201263 i tried all that but when i connect my iphone to my itunes there is no restore button. why is this happening?

i tried all that but when i connect my iphone to my itunes there is no restore button. why is this happening?

Slightly important info to include.
Once the iPhone is in Recovery Mode, it must be restored with iTunes.
You are unable to select Restore?

I'm trying to isolate skin with a secondary layer and am successful. I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't see

I'm trying to isolate skin with a secondary layer and am successful. I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't seem to figure this out. Is there a better way to smooth skin?

Here's an Adobe help page for isolating skin with suggestion on the use of the blur slider also:
https://helpx.adobe.com/speedgrade/using/apply-secondary-color-corrections.html
And here's one of the original creators of Iridas/SpeedGrade, Patrick Palmer, a six minute vid-tut on using secondaries (specifically in CS6 but this hasn't changed):
http://tv.adobe.com/watch/learn-speedgrade-cs6/secondary-color-correction-in-speedgrade-cs 6/
I'd note, the "blur" and "denoise" tools on the Secondary tab are more about smoothing the keying of the secondary ... they apply a bit of blur or de-noising to make the secondary smoother and cover over the odd pixel or three or four that don't "fit" the key of the secondary in the middle of something you're aiming for.
In current SpeedGrade, I'd try using the Guassian Blur (Range) effect, and sample a good range of the skin tones.
And a lot of people use Red Giant's "Cosmo" plug-in over in AfterEffects or Premiere Pro ... it's a tool designed specifically for working skin tones, dealing with blemishes, wrinkles, spots, and such.
Neil

HT4075 I don't have any problems merging the documents by dragging, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I tried save and export, how can I create the file after merging?

Hi, I'm having trouble saving the documents when merging in Preview. I don't have any problems merging the pdf documents by dragging them in preview, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I've tried save and export, but none merge the documents after saving... how can I create the file (with all the pdf files) after merging?

That's a comment in the file. It has no effect at all.

HT1766 im trying to backup, but when i hit file menu and select devices it wont allow me to select

Similar Messages

Maybe you are looking for