HT1766 iPad not responding after installing iOS 7.0.2
Hello, I updated my iPad with iOS 7.0.2. After installation, it indicated to connect to iTunes. After connecting nothing has happened. iPad is not responding. iTunes is also not recognising my iPad! What to do?
Try recovery mode as described here.
Note you may have to try to get into recovery mode more than once to succeed.
http://support.apple.com/kb/HT1808
Similar Messages
-
Firefox Not Responding after Installing Microsoft Office 10
After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?
1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng -
My (2) I5 phones ios 8.0.2 firmware 7.03.00 will not rotate after installing IOS 8. I have lock portrait orientation turned off. It won't even after turning the phone to the portrait landscape position it will not even turn TURN ON!!
It shows I5c... the phones are I5 not I5c's
-
Push notifications not working after installing IOS 7.1. Need your help.
whatzapp is working, push SMS notifications have completely gone after installing IOS 7.1
I'm having the same problem. No SMS sound alert and no npush notifications since upgrading to iOS 7.1
Made all the verifications in settings and it's all fine, still having the issue and it's annoying. -
Mail stopped working on iPad & iPhone, but not G5, after installing iOS 7.
Here we have a G5, an iPhone-4 and an iPad all linked to the same POP account. Mail fetching on all three devices had been working fine.
Earlier this week (10/23 or 10/24), however, Mail on both the iPhone and the iPad quit working shortly after our having installed iOS 7 on each of them. This could be a coincidence, but Mail on a G5 running 10.5.8 linked to the same account is still fetching and sending mail just fine.
Every time we swipe down on the message list (the gesture to fetch new mail) in Mail on the iPad, an error message appears,
Cannot Get Mail
The user name or password for
"Primary Mail Account" is incorrect
Settings | OK
An analogous gesture on the iPhone produces the same message.
But Mail on the G5 (running 10.5.8) still works fine to fetch mail from the same POP account.
Here are some details:
About two weeks ago, we installed iOS 7 on the iPad and the iPhone. Mail continued to work after the installation.
About a week later, last Wednesday, 10/23, the iPad went through a spontaneous installation event, in which the multilingual series of "Hello!" images familiar to those who install Mac operating systems floated across the screen. Apparently, this event installed iOS 7.0.3. There followed a short series of initialization dialogs, then everything seemed to work OK.
Except that Mail wasn't working. This could be a coincidence, but Mail on this iPad has not worked since last Wednesday. The last message received is dated last Wednesday.
We don't know whether the iPhone went through a similar event, but Mail quit working on it, as well. Mail on this iPhone now gets the same message, above, as on the iPad. The last message received by the iPhone was last Thursday, 10/24. The iPhone's iOS is now 7.0.2. The iPhone says that iOS 7.0.3 is downloaded, but not yet installed.
We compared the settings for Mail on the G5, on which Mail is still working, against the settings on the iPad and the iPhone. They all seem pretty much the same.
Have you heard of anyone else with this problem, or might you have an idea how to research it?
--GilThat worked! A couple of notes for anyone with the same problem:
I thought I'd be clever and create a new account before deleting the old one. That didn't work, as "Settings" kept insisting that the account had already been created. I had actually to delete the old account and create a new one from nada.
I was careful to write down all the settings parameters first. Even so, it took a few tries to get everything spelled right. Fortunately, "Settings" checked everything carefully and its messages pointed to the right places.
I still got the same error message the first time i relaunched Mail. However, this time I chose the "OK" option. Since then and thereafter it seems to be working.
Thanks for your help, lizdance40.
--Gil -
TS3992 Icloud backup does not completed after install IOS 8
I recently installed iOS 8 on my iPhone 5s (32 GB). Prior to the install, I had just enough storage to backup on iCloud. However, after the install, it is saying "[a]n additional 3.1 GB of storage is required. This is puzzling because under Manage Storage it says that I have 4.3 GB worth of backups (3.6 for iPhone and 731 MB for iPad), which is within the 5 GB of free storage. In addition when I try to Backup my Iphone several times show me that the Backup is not completed and the last back up was before install IOS 8(17 Sept)
it is probably something to do with the iOS 8 update. This could be the case, although I downloaded and installed iOS 8 via Iphone wireless update, so nothing (I'm guessing?) should have been downloaded onto the phone.
Any help would be appreciated.I am having this problem too and I saw on another board that it is because it is keeping the copy from ios7 instead of replacing it w/the new one and that the solution is to delete the old backup. I have not verified that this is the correct answer yet as I do not know how to do that, but at least it may get you one step closer.
-
SAP B1 always not responding after install in Windows 7
Dear All experts,
I have one client machine after change to Windows 7, the client SAP B1 always show not responding or seems like "freeze", cannot do any thing while user only open some marketing document. But the othes application like Ms Office or others than SAP B1 still can be respone.User have to end process the SAP B1. Sometimes it will create the dump file. Only user's machine with Windows 7 will happen this, others like Windows XP does not facing this problem.
This issue happen since user change to new machine with Windows 7. Previously, user is using Window XP and does not happen this issue. The current version is SAP B1 2007A SP01 PL 7. The work around we have done is check the FMS, addon, and reformat the machine to reinstall Windows 7, turn off UAC setting. Please advise.
Thanks & Regards
AngieHi,
What windows 7 edition are you using and is it one of this following :
- Professional, Enterprise & Ultimate
Edition
if yes, it is okay that you have done the work around. I suggest to consider the sql native client (sqlnc) installation. Use the correct version of sqlnc. you use 2008 version for SQL 2008 and 2005 version for SQL 2005. Also, check if you have installed .net framework 1.1 or 2.0.
What about the PC hardware and software spec. are you using B1 system requirement guidance ?
Many causes that make slow performance in B1 especially when you are using B1 2007A SP01 PL07. I said that because it is the previous PL that approved by SAP to use in win 7. So, try to upgrade to latest PL i.e. PL11. See if the problem still persists. Let's know if persists.
JimM -
Storage Provider not responding after installing SCVMM 2012 R2 UR5
After installing UR5 registered storage providers show Not Responding. I had two registered, both scale out fileservers in the same domain as VMM that were working fine before UR5. Sofs running 2012R2 with latest patches
Trying to refresh provider:
Error (26101)
Storage discovery of provider {0869e333-12f6-44c7-b6b7-7139530a18c9} for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 46010.
Recommended Action
Specify valid provider, port and user credentials for storage discovery.
The other one I deleted to recreate it. The deletion yielded:
Error (26312)
Unregistering the storage subsystem with unique ID {bca715fb-ce94-47f5-9558-f8e862c3e7dc}:SS failed from VMM01.hyper-v.blaa.com with error code 46005 [SM_RC_SUBSYSTEM_NOT_REGISTERED].
However the storage provider was removed and now if I run Get-SCStorageProvider i can't see it. When I try to add it back I get an error :-(
Error (26311)
Registration of the storage subsystem ss02.hyper-v.blaa.com for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 4 [SM_RC_GENERIC_FAILURE].
Not sure what's happening but looking at the roleholder in the storage cluster I have an error in the VMI-Activity log:
Log Name: Microsoft-Windows-WMI-Activity/Operational
Source: Microsoft-Windows-WMI-Activity
Date: 2015-02-23 00:11:52
Event ID: 5858
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: xxx
Description:
Id = {99940B20-4D23-0003-FC56-D599234DD001}; ClientMachine = SS02-1; User = HYPER-V\xxx; ClientProcessId = 332; Component = Unknown; Operation = Start IWbemServices::GetObject - root\Microsoft\Windows\Storage\Providers_v2 : SPACES_StorageProvider.ObjectId="{0869e333-12f6-44c7-b6b7-7139530a18c9}";
ResultCode = 0x80041001; PossibleCause = Unknown
And a Security error:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2015-02-23 00:11:52
Event ID: 4656
Task Category: Other Object Access Events
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ss02-1.
Description:
A handle to an object was requested.
Subject:
Security ID:
HYPER-V\xxx
Account Name:
xxx
Account Domain:
HYPER-V
Logon ID:
0x117FC549
Object:
Object Server:
WS-Management Listener
Object Type:
Unknown
Object Name:
Unknown
Handle ID:
0x0
Resource Attributes:
Process Information:
Process ID:
0x14c
Process Name:
C:\Windows\System32\svchost.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
MAX_ALLOWED
Access Reasons:
Access Mask:
0x2000000
Privileges Used for Access Check:
Restricted SID Count:
0UPDATE:
Managed to get a window to reboot the storage cluster with the incomplete delete. After rebooting the registration of the storage provider completed and is now ok. Will try to reboot the other storage cluster as well. -
JSP is not responding after Installing oracle Apps 11i
Hi,
I installed Oracle Applications successfully on my PC with Windows XP OS.
I used expess installation for the VIS database.
After installation all Post Install checks passed except for "JSP is not responding"
checking URL = http://kanaan.mydomain:8003/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=E:\oracle\visappl\fnd\11.5.0\secure\VIS_kanaan\vis.dbc
JSP is not responding, waiting 15 seconds and retesting.
Anyhow if I log to http://kanaan.mydomain:8003 I am being directed to a page showing :
"Oracle Applications Rapid Install Portal"
Kindly advise how to check what is wrong with JSP and how to fix.
Thanks in advance
AKHi,
All services are starting properly with no errors
when opening the page "http://kanaan.mydomain:8003/oa_servlets/AppsLogin"
, i recieve the error :
The webpage cannot be found
HTTP 404
Most likely causes:
There might be a typing error in the address.
If you clicked on a link, it may be out of date.
What you can try:
Retype the address.
Go back to the previous page.
Go to kanaan.mydomain:8003 and look for the information you want.
More information
Apache is running in process manager.
In apache log file the last few lines are :
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
[Wed Feb 28 10:27:08 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:08 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:17 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:17 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 10:27:27 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:27 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:43 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:43 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:48 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:48 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 11:54:28 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 11:54:28 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:12:21 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:12:21 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:56 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:56 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:59 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:59 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 13:57:23 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 13:57:23 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 15:35:40 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 15:35:40 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
When running the command "ps -ef | grep -i apache":
C:\Documents and ettings\Administrator>E:\oracle\visora\iAS\Apache\Apache\bin
'E:\oracle\visora\iAS\Apache\Apache\bin' is not recognized as an internal or ext
ernal command,
operable program or batch file.
Also apache is running in the processes.
Kindly advise and thanks for your help -
Illustrator CS4 application not responding after install
Anyone knows how to slove this problem? I got the creative suite CS4 today and after installed dreamweaver, photoshop, acrobat reader works fine and fast except illustrator. When I opened the application and click on open a file or create a file, the application will show "Not Responding".
Anyone know how to solve it? I am using vistaWade,
You said that Adobe's employees come and visit this forum. And you are right, Adobe's employees disguised as a regular users are here all the time.
When the CEO said Adobe hired Low Level employees I did not know then what he meant. Now I know is for damage control.
I am not only one as you can only wish. Go to Adobe Feedback forum: http://forums.adobe.com/community/general/adobedotcom_feedback
Afraid of the wolves?
Can count higher than 1000.
But you have not answer the question. Where is the CS4 update? -
Program not Responding after installing PSE8
I recently upgraded to PSE8.
Since then I have noticed that when I go to shutdown my system (XP w/ SP3) I get
a window indicating a program is not responding. The title of the window is
'End Program - 9c0'. The '9c0' part is not always the same.
Last night it was 960. I've checked before the shutdown to see if there is any application
or process with a number like that and I have never found one.
I believe I keep my system free of viruses, etc. but I did do a complete virus scan
with Avast as well as Symantec. Plus spyware checks by AdAware and SpyBot.
I'm wondering if anyone else has noticed anything like this?I have the same problem. I'm running XP SP/3, and after I installed PhotoShopElements my machine hangs at shutdown until I kill a running process. The problem goes away if I stop ElementsOrganizerSynchAgent.exe. So for now, my solution is to set the service to start manually.
Any chance of getting a fix? The program I assume performs a needed function, and I'm now without it.
Alan Stone -
Garageband Not Responding after Installing Pro Tools 8 LE
So, after having installed Pro Tools 8 LE, I want to use GarageBand, and after clicking the icon, it keeps bouncing. The program does not open and on the Activity Monitor it shows and "Not responding". Any ideas? Thanks! I'm running Mac Os X 10.7.5
Que Tal Amigos, en busca de este problema en diferentes foros, me di a la tarea de traducir cada unos de sus preguntas y dudas ya que no se ingles, por lo tanto espero que se den a la tarea de traducir esto a su idioma ya que tengo la solucion de este Gran Problema que tenemos todos los que actiuaizamos a Lion OSX 10.7...buen ahi les va al parecer uno de los drivers midi de las superficies de control o interfaces de Avid 002 y 003 utilizan este para poder utilizar sus in/out midis ya que si tu eres de los que no tiene esta interfase o no utilizas estas salidas y entradas es preferible que borres o cambies de ubicacion a alguna carpeta "como la de Plugins unused" este archivo...Library/audio/mididrivers/DigiDioMidiDriver
este driver es el que crea conflictos entre Garageband,Logic y Protools, hoy lo he echo y todos mis programas van de maravilla...Protools 8.0.5, Logic 9.0.5 Garageband etc...Espero se de gran ayuda ya que estuve por muchos foros y nunca encontre la respuesta,pero mis pocos conocimientos de audio me hiceron llegar a esta conclucion....saludos y Feliz Dia De Gracias......
atte Mexicano Terco.... -
IMessage and push notifications not working after installing iOS 7!!
My iMessages and push notifications don't work after installing iOS7..!!! I can't even log in to iMessages using my Apple ID.. And every time I log into Facebook or whatsapp it keeps telling me to connect to iTunes to receive push notifications..!!
I connected to iTunes on my comp and tried resetting my phone.. Nothing works!! HELPIts stuffed, iMessage and facetime are both sitting on "waiting for activation" so they are not working, 1 post suggested resetting the phone again setting up as a new phone and then turning iMessage and Facetime on and then restoring. After the reset iMessage and Facetime started working, I did the restore and it stopped working again. Nice waste of 2 hours.
-
PShop CS2 (Not responding) after installing
I have just reinstalled Adobe Photoshop CS2. It appears to install okay. When you start it up it appears to start okay, the splash screen appears and goes through the start up, that disappears and the normal working page appears, but as soon as I click on any menu,tool etc. it goes blank with the top left corner of the working page showing Adobe Photoshop (not responding). I also tried a "repair" from the unistaller, but no joy.
For info:
I am working on a Dell Dimension 9150 I am running XP pro sp3. AV is AVG and firewall is Comodo. I have never been able to get PShop working on this computer, so I don't think it is a PShop problem. I have stacks of disk space, and 2Gb RAM.Presume you have solved this but if not, uninstall PS2 ( I also unistalled all other versions I had PS5, etc), re-install, then install 9.02 update.
Did all this then accessed CS2 - no probem.
Think it may be a multi-processor problem. -
IPad not responding after hard reset
My iPad 2 is not responding normally, voice assistance has turned on automatically, I need to triple tap icons to open, and the device is generally operating slowly. I have tried a hard reset, but the issue remains and I can't seem to find the reset function in the general menu settings. Anyone else experienced similar problems. Any assistance greatly appreciated?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097
Maybe you are looking for
-
Interactive Report - Compute columns
Hi, Interactive report query is storing in a apex view - apex_application_page_ir. Like, if compute columns added in runtime, APEX is making a new query with compute columns. I want to know in which APEX view is having this query: I created a Interac
-
IOS7 change calendar event color
I know how to change the color of the calendar in IOS7, but the calendar EVENTS always show in pale grey - which is often difficult to view. How can I change the color of the calendar EVENT 'dot' when looking at a whole month on the iphone screen?
-
im attempting to a connect to a sql database using php. when i create a new connection Dreamweaver always gives me an "unexpected error" so it connot connect. the database is mysql 4.1 (on godaddy.com) and php 5 on the server. i attemped to change it
-
Post code error when installing apps (4s)
Hi, I have a new 4s and I cant install appls because it always says "wrong post code" even though I have entered the right one. Any ideas how to fix this? Thanks
-
My search engine choices are missing
Where the search bar is located, the only choice I have is "Firefox Help". I had Google, Yahoo, Ask Jeeves, etc.